summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/st
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/st')
-rw-r--r--arch/arm/boot/dts/st/Makefile1
-rw-r--r--arch/arm/boot/dts/st/stih410-b2260.dts4
-rw-r--r--arch/arm/boot/dts/st/stih410.dtsi34
-rw-r--r--arch/arm/boot/dts/st/stm32mp131.dtsi40
-rw-r--r--arch/arm/boot/dts/st/stm32mp135f-dk.dts12
-rw-r--r--arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi16
-rw-r--r--arch/arm/boot/dts/st/stm32mp151.dtsi43
-rw-r--r--arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts267
-rw-r--r--arch/arm/boot/dts/st/stm32mp157c-ev1.dts9
-rw-r--r--arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts84
-rw-r--r--arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts84
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi100
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi12
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi10
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi10
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi7
-rw-r--r--arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi18
17 files changed, 622 insertions, 129 deletions
diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
index eab3a9bd435f..b7d5d305cbbe 100644
--- a/arch/arm/boot/dts/st/Makefile
+++ b/arch/arm/boot/dts/st/Makefile
@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32mp151c-mect1s.dtb \
stm32mp153c-dhcom-drc02.dtb \
stm32mp153c-dhcor-drc-compact.dtb \
+ stm32mp153c-lxa-tac-gen3.dtb \
stm32mp153c-mecio1r1.dtb \
stm32mp157a-avenger96.dtb \
stm32mp157a-dhcor-avenger96.dtb \
diff --git a/arch/arm/boot/dts/st/stih410-b2260.dts b/arch/arm/boot/dts/st/stih410-b2260.dts
index 240b62040000..736b1e059b0a 100644
--- a/arch/arm/boot/dts/st/stih410-b2260.dts
+++ b/arch/arm/boot/dts/st/stih410-b2260.dts
@@ -206,5 +206,9 @@
sata1: sata@9b28000 {
status = "okay";
};
+
+ gpu: gpu@9f00000 {
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/boot/dts/st/stih410.dtsi b/arch/arm/boot/dts/st/stih410.dtsi
index a69231854f78..d56343f44fda 100644
--- a/arch/arm/boot/dts/st/stih410.dtsi
+++ b/arch/arm/boot/dts/st/stih410.dtsi
@@ -285,5 +285,39 @@
resets = <&softreset STIH407_LPM_SOFTRESET>;
hdmi-phandle = <&sti_hdmi>;
};
+
+ gpu: gpu@9f00000 {
+ compatible = "st,stih410-mali", "arm,mali-400";
+ reg = <0x9f00000 0x10000>;
+ /* LIMA driver needs 2 clocks, use the same for both */
+ clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>,
+ <&clk_s_c0_flexgen CLK_ICN_GPU>;
+ clock-names = "bus", "core";
+ assigned-clocks = <&clk_s_c0_flexgen CLK_ICN_GPU>;
+ assigned-clock-rates = <400000000>;
+ resets = <&softreset STIH407_GPU_SOFTRESET>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3";
+
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index e1a764d269d2..0019d12c3d3d 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -261,6 +261,11 @@
dma-names = "up";
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
timer@5 {
compatible = "st,stm32h7-timer-trigger";
reg = <5>;
@@ -281,6 +286,11 @@
dma-names = "up";
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
timer@6 {
compatible = "st,stm32h7-timer-trigger";
reg = <6>;
@@ -1196,6 +1206,11 @@
access-controllers = <&etzpc 23>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@@ -1221,6 +1236,11 @@
access-controllers = <&etzpc 24>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@@ -1246,6 +1266,11 @@
access-controllers = <&etzpc 25>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@@ -1276,6 +1301,11 @@
access-controllers = <&etzpc 26>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@@ -1304,6 +1334,11 @@
access-controllers = <&etzpc 27>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@@ -1332,6 +1367,11 @@
access-controllers = <&etzpc 28>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index 3a276589fef7..19a32f7d4d7d 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -440,6 +440,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
/* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 func */
pinctrl-0 = <&pwm3_pins_a>;
@@ -456,6 +459,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
/* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 func */
pinctrl-0 = <&pwm4_pins_a>;
@@ -472,6 +478,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
/* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 func */
pinctrl-0 = <&pwm8_pins_a>;
@@ -486,6 +495,9 @@
&timers14 {
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
/* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 func */
pinctrl-0 = <&pwm14_pins_a>;
diff --git a/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
index 5edbc790d1d2..6236ce2a6968 100644
--- a/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi
@@ -85,8 +85,8 @@
vddcpu: buck1 { /* VDD_CPU_1V2 */
regulator-name = "vddcpu";
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-initial-mode = <0>;
regulator-over-current-protection;
@@ -201,17 +201,17 @@
pagesize = <64>;
};
- eeprom0wl: eeprom@58 {
- compatible = "st,24256e-wl"; /* ST M24256E WL page of 0x50 */
- pagesize = <64>;
- reg = <0x58>;
- };
-
rv3032: rtc@51 {
compatible = "microcrystal,rv3032";
reg = <0x51>;
interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>;
};
+
+ eeprom0wl: eeprom@58 {
+ compatible = "st,24256e-wl"; /* ST M24256E WL page of 0x50 */
+ pagesize = <64>;
+ reg = <0x58>;
+ };
};
&iwdg2 {
diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index b28dc90926bd..b9a87fbe971d 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -129,7 +129,7 @@
reg = <0x4c001000 0x400>;
st,proc-id = <0>;
interrupts-extended =
- <&exti 61 1>,
+ <&exti 61 IRQ_TYPE_LEVEL_HIGH>,
<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "rx", "tx";
clocks = <&rcc IPCC>;
@@ -578,6 +578,11 @@
access-controllers = <&etzpc 20>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
timer@5 {
compatible = "st,stm32h7-timer-trigger";
reg = <5>;
@@ -599,6 +604,11 @@
access-controllers = <&etzpc 21>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
timer@6 {
compatible = "st,stm32h7-timer-trigger";
reg = <6>;
@@ -618,6 +628,11 @@
access-controllers = <&etzpc 22>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@@ -643,6 +658,11 @@
access-controllers = <&etzpc 23>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@@ -668,6 +688,11 @@
access-controllers = <&etzpc 24>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@@ -1116,6 +1141,11 @@
access-controllers = <&etzpc 54>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
@@ -1144,11 +1174,17 @@
access-controllers = <&etzpc 55>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
status = "disabled";
};
+
timer@15 {
compatible = "st,stm32h7-timer-trigger";
reg = <15>;
@@ -1171,6 +1207,11 @@
access-controllers = <&etzpc 56>;
status = "disabled";
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
+
pwm {
compatible = "st,stm32-pwm";
#pwm-cells = <3>;
diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts b/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts
new file mode 100644
index 000000000000..a40b0eae8da3
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2021 Rouven Czerwinski, Pengutronix
+ * Copyright (C) 2023, 2024 Leonard Göhrs, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc-lxa-tac.dtsi"
+
+/ {
+ model = "Linux Automation Test Automation Controller (TAC) Gen 3";
+ compatible = "lxa,stm32mp153c-tac-gen3", "oct,stm32mp153x-osd32", "st,stm32mp153";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&v3v3>;
+
+ brightness-levels = <0 31 63 95 127 159 191 223 255>;
+ default-brightness-level = <7>;
+ pwms = <&led_pwm 3 1000000 0>;
+ };
+
+ reg_iobus_12v: regulator-iobus-12v {
+ compatible = "regulator-fixed";
+ vin-supply = <&reg_12v>;
+ gpio = <&gpioh 13 GPIO_ACTIVE_LOW>;
+ regulator-max-microvolt = <12000000>;
+ regulator-min-microvolt = <12000000>;
+ regulator-name = "12V_IOBUS";
+ };
+
+ led-controller-1 {
+ compatible = "pwm-leds-multicolor";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+ max-brightness = <65535>;
+
+ led-red {
+ active-low;
+ color = <LED_COLOR_ID_RED>;
+ pwms = <&led_pwm 0 1000000 0>;
+ };
+
+ led-green {
+ active-low;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&led_pwm 2 1000000 0>;
+ };
+
+ led-blue {
+ active-low;
+ color = <LED_COLOR_ID_BLUE>;
+ pwms = <&led_pwm 1 1000000 0>;
+ };
+ };
+ };
+
+ led-controller-2 {
+ compatible = "gpio-leds";
+
+ led-5 {
+ label = "tac:green:iobus";
+ gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-6 {
+ label = "tac:green:can";
+ gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-7 {
+ label = "tac:green:out0";
+ gpios = <&gpiob 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-8 {
+ label = "tac:green:out1";
+ gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-9 {
+ label = "tac:green:uarttx";
+ gpios = <&gpiod 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-10 {
+ label = "tac:green:uartrx";
+ gpios = <&gpiof 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-11 {
+ label = "tac:green:usbh1";
+ gpios = <&gpioc 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-12 {
+ label = "tac:green:usbh2";
+ gpios = <&gpiod 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-13 {
+ label = "tac:green:usbh3";
+ gpios = <&gpiob 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-14 {
+ label = "tac:green:usbg";
+ gpios = <&gpiod 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usb-gadget";
+ };
+
+ led-15 {
+ label = "tac:green:dutpwr";
+ gpios = <&gpioa 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&board_adc1_ain_pins>;
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdda>;
+ vref-supply = <&vrefbuf>;
+ status = "okay";
+
+ adc1: adc@0 {
+ st,adc-channels = <2 5 9 10 13 14 15 18>;
+ st,min-sample-time-nsecs = <5000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ channel@2 {
+ reg = <2>;
+ label = "OUT_0_FB";
+ };
+
+ channel@5 {
+ reg = <5>;
+ label = "IOBUS_CURR_FB";
+ };
+
+ channel@9 {
+ reg = <9>;
+ label = "IOBUS_VOLT_FB";
+ };
+
+ channel@10 {
+ reg = <10>;
+ label = "OUT_1_FB";
+ };
+
+ channel@13 {
+ reg = <13>;
+ label = "HOST_CURR_FB";
+ };
+
+ channel@14 {
+ reg = <14>;
+ label = "HOST_3_CURR_FB";
+ };
+
+ channel@15 {
+ reg = <15>;
+ label = "HOST_1_CURR_FB";
+ };
+
+ channel@18 {
+ reg = <18>;
+ label = "HOST_2_CURR_FB";
+ };
+ };
+
+ adc2: adc@100 {
+ st,adc-channels = <12>;
+ st,min-sample-time-nsecs = <500000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ channel@12 {
+ reg = <12>;
+ label = "TEMP_INTERNAL";
+ };
+ };
+};
+
+&gpioa {
+ gpio-line-names = "", "", "", "", "", /* 0 */
+ "ETH_GPIO1", "ETH_INT", "", "", "", /* 5 */
+ "", "", "", "BOOTROM_LED", "ETH_LAB_LEDRP", /* 10 */
+ ""; /* 15 */
+};
+
+&gpioc {
+ gpio-line-names = "", "DUT_PWR_DISCH", "", "", "", /* 0 */
+ "", "", "", "", "", /* 5 */
+ "", ""; /* 10 */
+};
+
+&gpioe {
+ gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /* 0 */
+ "", "", "USER_BTN2", "DUT_PWR_EN", "UART_TX_EN", /* 5 */
+ "UART_RX_EN", "TP24", "", "TP25", "TP26", /* 10 */
+ "TP27"; /* 15 */
+};
+
+&gpiog {
+ gpio-line-names = "ETH_RESET", "", "", "", "", /* 0 */
+ "IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /* 5 */
+ "POWER_ADC_RESET", "", "", "", "", /* 10 */
+ ""; /* 15 */
+};
+
+&m_can2 {
+ termination-gpios = <&gpioe 4 GPIO_ACTIVE_HIGH>;
+ termination-ohms = <120>;
+};
+
+&pinctrl {
+ board_adc1_ain_pins: board-adc1-ain-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* ADC1_INP2 */
+ <STM32_PINMUX('B', 1, ANALOG)>, /* ADC1_INP5 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /* ADC1_INP9 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* ADC1_INP10 */
+ <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1_INP13 */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ADC1_INP14 */
+ <STM32_PINMUX('A', 3, ANALOG)>, /* ADC1_INP15 */
+ <STM32_PINMUX('A', 4, ANALOG)>; /* ADC1_INP18 */
+ };
+ };
+};
+
+&spi2 {
+ adc@0 {
+ compatible = "ti,lmp92064";
+ reg = <0>;
+
+ reset-gpios = <&gpiog 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ shunt-resistor-micro-ohms = <15000>;
+ spi-max-frequency = <5000000>;
+ vdd-supply = <&reg_pb_3v3>;
+ vdig-supply = <&reg_pb_3v3>;
+ };
+};
+
+&timers8 {
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ status = "okay";
+
+ led_pwm: pwm {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pwm8_pins_b>;
+ pinctrl-1 = <&pwm8_sleep_pins_b>;
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
index 9eb9a1bf4f2c..8f99c30f1af1 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts
@@ -306,6 +306,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
pinctrl-0 = <&pwm2_pins_a>;
pinctrl-1 = <&pwm2_sleep_pins_a>;
@@ -321,6 +324,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
pinctrl-0 = <&pwm8_pins_a>;
pinctrl-1 = <&pwm8_sleep_pins_a>;
@@ -336,6 +342,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
pinctrl-0 = <&pwm12_pins_a>;
pinctrl-1 = <&pwm12_sleep_pins_a>;
diff --git a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts
index 81f254fb88b0..e72e42eb0eb4 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts
@@ -35,6 +35,76 @@
};
};
+&adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc1_ain_pins_a>;
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdda>;
+ vref-supply = <&vrefbuf>;
+ status = "okay";
+
+ adc1: adc@0 {
+ st,adc-channels = <0 1 2 5 9 10 13 15>;
+ st,min-sample-time-nsecs = <5000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ channel@0 {
+ reg = <0>;
+ label = "HOST_2_CURR_FB";
+ };
+
+ channel@1 {
+ reg = <1>;
+ label = "HOST_3_CURR_FB";
+ };
+
+ channel@2 {
+ reg = <2>;
+ label = "OUT_0_FB";
+ };
+
+ channel@5 {
+ reg = <5>;
+ label = "IOBUS_CURR_FB";
+ };
+
+ channel@9 {
+ reg = <9>;
+ label = "IOBUS_VOLT_FB";
+ };
+
+ channel@10 {
+ reg = <10>;
+ label = "OUT_1_FB";
+ };
+
+ channel@13 {
+ reg = <13>;
+ label = "HOST_CURR_FB";
+ };
+
+ channel@15 {
+ reg = <15>;
+ label = "HOST_1_CURR_FB";
+ };
+ };
+
+ adc2: adc@100 {
+ st,adc-channels = <12>;
+ st,min-sample-time-nsecs = <500000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ channel@12 {
+ reg = <12>;
+ label = "TEMP_INTERNAL";
+ };
+ };
+};
+
&gpioa {
gpio-line-names = "", "", "STACK_CS2", "", "STACK_CS3", /* 0 */
"ETH_GPIO1", "ETH_INT", "", "", "", /* 5 */
@@ -48,6 +118,20 @@
"", ""; /* 10 */
};
+&gpioe {
+ gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /* 0 */
+ "", "", "USER_BTN2", "TP48", "UART_TX_EN", /* 5 */
+ "UART_RX_EN", "TP24", "", "TP25", "TP26", /* 10 */
+ "TP27"; /* 15 */
+};
+
+&gpiog {
+ gpio-line-names = "ETH_RESET", "", "", "", "", /* 0 */
+ "IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /* 5 */
+ "TP49", "", "", "", "", /* 10 */
+ ""; /* 15 */
+};
+
&gpu {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
index 4cc177031661..2ae281725a48 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
@@ -121,6 +121,76 @@
};
};
+&adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc1_ain_pins_a>;
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdda>;
+ vref-supply = <&vrefbuf>;
+ status = "okay";
+
+ adc1: adc@0 {
+ st,adc-channels = <0 1 2 5 9 10 13 15>;
+ st,min-sample-time-nsecs = <5000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ channel@0 {
+ reg = <0>;
+ label = "HOST_2_CURR_FB";
+ };
+
+ channel@1 {
+ reg = <1>;
+ label = "HOST_3_CURR_FB";
+ };
+
+ channel@2 {
+ reg = <2>;
+ label = "OUT_0_FB";
+ };
+
+ channel@5 {
+ reg = <5>;
+ label = "IOBUS_CURR_FB";
+ };
+
+ channel@9 {
+ reg = <9>;
+ label = "IOBUS_VOLT_FB";
+ };
+
+ channel@10 {
+ reg = <10>;
+ label = "OUT_1_FB";
+ };
+
+ channel@13 {
+ reg = <13>;
+ label = "HOST_CURR_FB";
+ };
+
+ channel@15 {
+ reg = <15>;
+ label = "HOST_1_CURR_FB";
+ };
+ };
+
+ adc2: adc@100 {
+ st,adc-channels = <12>;
+ st,min-sample-time-nsecs = <500000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ channel@12 {
+ reg = <12>;
+ label = "TEMP_INTERNAL";
+ };
+ };
+};
+
&gpioa {
gpio-line-names = "", "", "DUT_PWR_EN", "", "STACK_CS3", /* 0 */
"ETH_GPIO1", "ETH_INT", "", "", "", /* 5 */
@@ -134,6 +204,20 @@
"", ""; /* 10 */
};
+&gpioe {
+ gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /* 0 */
+ "", "", "USER_BTN2", "TP48", "UART_TX_EN", /* 5 */
+ "UART_RX_EN", "TP24", "", "TP25", "TP26", /* 10 */
+ "TP27"; /* 15 */
+};
+
+&gpiog {
+ gpio-line-names = "ETH_RESET", "", "", "", "", /* 0 */
+ "IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /* 5 */
+ "TP49", "", "", "", "", /* 10 */
+ ""; /* 15 */
+};
+
&gpu {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
index c87fd96cbd91..be0c355d3105 100644
--- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
@@ -16,12 +16,20 @@
/ {
aliases {
+ can0 = &m_can1;
+ can1 = &m_can2;
ethernet0 = &ethernet0;
ethernet1 = &port_uplink;
ethernet2 = &port_dut;
+ i2c0 = &i2c1;
+ i2c1 = &i2c4;
+ i2c2 = &i2c5;
mmc1 = &sdmmc2;
serial0 = &uart4;
serial1 = &usart3;
+ spi0 = &spi2;
+ spi1 = &spi4;
+ spi2 = &spi5;
};
chosen {
@@ -142,76 +150,6 @@
baseboard_eeprom: &sip_eeprom {
};
-&adc {
- pinctrl-names = "default";
- pinctrl-0 = <&adc1_ain_pins_a>;
- vdd-supply = <&vdd>;
- vdda-supply = <&vdda>;
- vref-supply = <&vrefbuf>;
- status = "okay";
-
- adc1: adc@0 {
- st,adc-channels = <0 1 2 5 9 10 13 15>;
- st,min-sample-time-nsecs = <5000>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- channel@0 {
- reg = <0>;
- label = "HOST_2_CURR_FB";
- };
-
- channel@1 {
- reg = <1>;
- label = "HOST_3_CURR_FB";
- };
-
- channel@2 {
- reg = <2>;
- label = "OUT_0_FB";
- };
-
- channel@5 {
- reg = <5>;
- label = "IOBUS_CURR_FB";
- };
-
- channel@9 {
- reg = <9>;
- label = "IOBUS_VOLT_FB";
- };
-
- channel@10 {
- reg = <10>;
- label = "OUT_1_FB";
- };
-
- channel@13 {
- reg = <13>;
- label = "HOST_CURR_FB";
- };
-
- channel@15 {
- reg = <15>;
- label = "HOST_1_CURR_FB";
- };
- };
-
- adc2: adc@100 {
- st,adc-channels = <12>;
- st,min-sample-time-nsecs = <500000>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- channel@12 {
- reg = <12>;
- label = "TEMP_INTERNAL";
- };
- };
-};
-
&crc1 {
status = "okay";
};
@@ -265,13 +203,6 @@ baseboard_eeprom: &sip_eeprom {
"ETH_LAB_LEDRN"; /* 15 */
};
-&gpioe {
- gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /* 0 */
- "", "", "USER_BTN2", "TP48", "UART_TX_EN", /* 5 */
- "UART_RX_EN", "TP24", "", "TP25", "TP26", /* 10 */
- "TP27"; /* 15 */
-};
-
&gpiof {
gpio-line-names = "TP36", "TP37", "", "", "OLED_CS", /* 0 */
"", "", "", "", "", /* 5 */
@@ -279,13 +210,6 @@ baseboard_eeprom: &sip_eeprom {
""; /* 15 */
};
-&gpiog {
- gpio-line-names = "ETH_RESET", "", "", "", "", /* 0 */
- "IOBUS_FLT_FB", "", "USER_LED2", "ETH1_PPS_A", "CAN_0_120R", /* 5 */
- "TP49", "", "", "", "", /* 10 */
- ""; /* 15 */
-};
-
&gpioh {
gpio-line-names = "", "", "OUT_1", "OUT_0", "OLED_RESET", /* 0 */
"", "", "", "", "", /* 5 */
@@ -379,10 +303,6 @@ baseboard_eeprom: &sip_eeprom {
};
};
-&rtc {
- status = "okay";
-};
-
&sdmmc2 {
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
@@ -576,6 +496,10 @@ baseboard_eeprom: &sip_eeprom {
vusb_d-supply = <&vdd_usb>;
vusb_a-supply = <&reg18>;
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <32>;
+ g-tx-fifo-size = <128 128 64 16 16 16 16 16>;
+
dr_mode = "peripheral";
status = "okay";
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
index bb4f8a0b937f..abe2dfe70636 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -6,18 +6,6 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/pwm/pwm.h>
-/ {
- aliases {
- serial0 = &uart4;
- serial1 = &usart3;
- serial2 = &uart8;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
&adc {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 171d7c7658fa..0fb4e55843b9 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -7,16 +7,6 @@
#include <dt-bindings/pwm/pwm.h>
/ {
- aliases {
- serial0 = &uart4;
- serial1 = &usart3;
- serial2 = &uart8;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
clk_ext_audio_codec: clock-codec {
compatible = "fixed-clock";
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
index b5bc53accd6b..01c693cc0344 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi
@@ -7,16 +7,6 @@
#include <dt-bindings/pwm/pwm.h>
/ {
- aliases {
- serial0 = &uart4;
- serial1 = &usart3;
- serial2 = &uart8;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
led {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
index 74a11ccc5333..142d4a8731f8 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
@@ -14,6 +14,13 @@
ethernet1 = &ksz8851;
rtc0 = &hwrtc;
rtc1 = &rtc;
+ serial0 = &uart4;
+ serial1 = &uart8;
+ serial2 = &usart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
};
memory@c0000000 {
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index f7634c51efb2..a5511b1f0ce3 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -570,6 +570,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
pinctrl-0 = <&pwm1_pins_a>;
pinctrl-1 = <&pwm1_sleep_pins_a>;
@@ -585,6 +588,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
pinctrl-0 = <&pwm3_pins_a>;
pinctrl-1 = <&pwm3_sleep_pins_a>;
@@ -600,6 +606,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
@@ -615,6 +624,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
pinctrl-0 = <&pwm5_pins_a>;
pinctrl-1 = <&pwm5_sleep_pins_a>;
@@ -630,6 +642,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
timer@5 {
status = "okay";
};
@@ -639,6 +654,9 @@
/delete-property/dmas;
/delete-property/dma-names;
status = "disabled";
+ counter {
+ status = "okay";
+ };
pwm {
pinctrl-0 = <&pwm12_pins_a>;
pinctrl-1 = <&pwm12_sleep_pins_a>;
generated by cgit (git 2.34.1) at 2025-06-10 03:31:09 +0000