summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/ste-href-tvk1281618.dtsi')
-rw-r--r--arch/arm/boot/dts/ste-href-tvk1281618.dtsi285
1 files changed, 0 insertions, 285 deletions
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
deleted file mode 100644
index 3bafd26b4824..000000000000
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ /dev/null
@@ -1,285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * Device Tree for the TVK1281618 UIB
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>;
-
- button@139 {
- /* Proximity sensor */
- gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
- linux,code = <11>; /* SW_FRONT_PROXIMITY */
- label = "SFH7741 Proximity Sensor";
- };
- button@145 {
- /* Hall sensor */
- gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
- linux,code = <0>; /* SW_LID */
- label = "HED54XXU11 Hall Effect Sensor";
- };
- };
-
- soc {
- i2c@80004000 {
- tc35893@44 {
- compatible = "toshiba,tc35893";
- reg = <0x44>;
- interrupt-parent = <&gpio6>;
- interrupts = <26 IRQ_TYPE_EDGE_RISING>;
- pinctrl-names = "default";
- pinctrl-0 = <&tc35893_tvk_mode>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- tc3589x_gpio {
- compatible = "toshiba,tc3589x-gpio";
- interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- };
- tc3589x_keypad {
- compatible = "toshiba,tc3589x-keypad";
- interrupts = <6>;
- debounce-delay-ms = <4>;
- keypad,num-columns = <8>;
- keypad,num-rows = <8>;
- linux,no-autorepeat;
- wakeup-source;
- linux,keymap = <0x0301006b
- 0x04010066
- 0x06040072
- 0x040200d7
- 0x0303006a
- 0x0205000e
- 0x0607008b
- 0x0500001c
- 0x0403000b
- 0x03040034
- 0x05020067
- 0x0305006c
- 0x040500e7
- 0x0005009e
- 0x06020073
- 0x01030039
- 0x07060069
- 0x050500d9>;
- };
- };
- };
- /* Sensors mounted on this board variant */
- i2c@80128000 {
- lsm303dlh@18 {
- /* Accelerometer */
- compatible = "st,lsm303dlh-accel";
- st,drdy-int-pin = <1>;
- drive-open-drain;
- reg = <0x18>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&db8500_vsmps2_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&accel_tvk_mode>;
- /*
- * These interrupts cannot be used: the other component
- * ST-Micro L3D4200D gyro that is connected to the same lines
- * cannot set its DRDY line to open drain, so it cannot be
- * shared with other peripherals. The should be defined for
- * the falling edge if they could be wired together.
- *
- * interrupts-extended =
- * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
- * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
- */
- };
- lsm303dlh@1e {
- /* Magnetometer */
- compatible = "st,lsm303dlh-magn";
- reg = <0x1e>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&db8500_vsmps2_reg>;
- /*
- * These interrupts cannot be used: the other component
- * ST-Micro L3D4200D gyro that is connected to the same lines
- * cannot set its DRDY line to open drain, so it cannot be
- * shared with other peripherals. The should be defined for
- * the falling edge if they could be wired together.
- *
- * interrupts-extended =
- * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
- * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
- */
- };
- lis331dl@1c {
- /* Accelerometer */
- compatible = "st,lis331dl-accel";
- st,drdy-int-pin = <1>;
- reg = <0x1c>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&db8500_vsmps2_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&accel_tvk_mode>;
- interrupt-parent = <&gpio2>;
- /* INT2 would need to be open drain */
- interrupts = <18 IRQ_TYPE_EDGE_RISING>,
- <19 IRQ_TYPE_EDGE_RISING>;
- };
- ak8974@f {
- /* Magnetometer */
- compatible = "asahi-kasei,ak8974";
- reg = <0x0f>;
- avdd-supply = <&ab8500_ldo_aux1_reg>;
- dvdd-supply = <&db8500_vsmps2_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&gyro_magn_tvk_mode>;
- /*
- * These interrupts cannot be used: the other component
- * ST-Micro L3D4200D gyro that is connected to the same lines
- * cannot set its DRDY line to open drain, so it cannot be
- * shared with other peripherals. The should be defined for
- * the falling edge if they could be wired together.
- *
- * interrupts-extended =
- * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
- * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>;
- */
- };
- l3g4200d@68 {
- /* Gyroscope */
- compatible = "st,l3g4200d-gyro";
- st,drdy-int-pin = <2>;
- reg = <0x68>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&db8500_vsmps2_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&gyro_magn_tvk_mode>;
- interrupts-extended =
- <&gpio1 0 IRQ_TYPE_EDGE_RISING>,
- <&gpio0 31 IRQ_TYPE_EDGE_RISING>;
- };
- lsp001wm@5c {
- /* Barometer/pressure sensor */
- compatible = "st,lps001wp-press";
- reg = <0x5c>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&db8500_vsmps2_reg>;
- };
- };
-
- i2c@80110000 {
- synaptics@4b {
- /* Synaptics RMI4 TM1217 touchscreen */
- compatible = "syna,rmi4-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x4b>;
- vdd-supply = <&ab8500_ldo_aux1_reg>;
- vddio-supply = <&db8500_vsmps2_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&synaptics_tvk_mode>;
- interrupt-parent = <&gpio2>;
- interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
-
- rmi-f01@1 {
- reg = <0x1>;
- syna,nosleep = <1>;
- };
- rmi-f11@11 {
- reg = <0x11>;
- touchscreen-inverted-x;
- syna,sensor-type = <1>;
- };
- };
- };
-
- pinctrl {
- /* Pull up this GPIO pin */
- tc35893 {
- tc35893_tvk_mode: tc35893_tvk {
- tvk_cfg {
- pins = "GPIO218_AH11";
- ste,config = <&gpio_in_pu>;
- };
- };
- };
- prox {
- prox_tvk_mode: prox_tvk {
- tvk_cfg {
- pins = "GPIO217_AH12";
- ste,config = <&gpio_in_pu>;
- };
- };
- };
- hall {
- hall_tvk_mode: hall_tvk {
- tvk_cfg {
- pins = "GPIO145_C13";
- ste,config = <&gpio_in_pu>;
- };
- };
- };
- accelerometer {
- accel_tvk_mode: accel_tvk {
- /* Accelerometer interrupt lines 1 & 2 */
- tvk_cfg {
- pins = "GPIO82_C1", "GPIO83_D3";
- ste,config = <&gpio_in_pd>;
- };
- };
- };
- gyroscope {
- /*
- * These lines are shared between Gyroscope l3g400dh
- * and AK8974 magnetometer.
- */
- gyro_magn_tvk_mode: gyro_magn_tvk {
- /* GPIO 31 used for INT pull down the line */
- tvk_cfg1 {
- pins = "GPIO31_V3";
- ste,config = <&gpio_in_pd>;
- };
- /* GPIO 32 used for DRDY, pull this down */
- tvk_cfg2 {
- pins = "GPIO32_V2";
- ste,config = <&gpio_in_pd>;
- };
- };
- };
- synaptics {
- synaptics_tvk_mode: synaptics_tvk {
- /* Touchscreen uses GPIO 84 */
- tvk_cfg1 {
- pins = "GPIO84_C2";
- ste,config = <&gpio_in_pu>;
- };
- };
- };
- };
-
- mcde@a0350000 {
- status = "okay";
-
- dsi@a0351000 {
- panel {
- compatible = "samsung,s6d16d0";
- reg = <0>;
- vdd1-supply = <&ab8500_ldo_aux1_reg>;
- reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
- };
- };
- };
- };
-};