diff options
Diffstat (limited to 'arch/arm/boot/dts/ste-href.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/ste-href.dtsi | 266 |
1 files changed, 0 insertions, 266 deletions
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi deleted file mode 100644 index 4f6acbd8c040..000000000000 --- a/arch/arm/boot/dts/ste-href.dtsi +++ /dev/null @@ -1,266 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2012 ST-Ericsson AB - */ - -#include <dt-bindings/interrupt-controller/irq.h> -#include "ste-dbx5x0.dtsi" -#include "ste-href-family-pinctrl.dtsi" - -/ { - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - soc { - uart@80120000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart0_default_mode>; - pinctrl-1 = <&uart0_sleep_mode>; - status = "okay"; - }; - - /* This UART is unused and thus left disabled */ - uart@80121000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart1_default_mode>; - pinctrl-1 = <&uart1_sleep_mode>; - }; - - uart@80007000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart2_default_mode>; - pinctrl-1 = <&uart2_sleep_mode>; - status = "okay"; - }; - - i2c@80004000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c0_default_mode>; - pinctrl-1 = <&i2c0_sleep_mode>; - }; - - i2c@80122000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c1_default_mode>; - pinctrl-1 = <&i2c1_sleep_mode>; - }; - - i2c@80128000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c2_default_mode>; - pinctrl-1 = <&i2c2_sleep_mode>; - lp5521@33 { - compatible = "national,lp5521"; - reg = <0x33>; - label = "lp5521_pri"; - clock-mode = /bits/ 8 <2>; - chan0 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - linux,default-trigger = "heartbeat"; - }; - chan1 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - }; - chan2 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - }; - }; - lp5521@34 { - compatible = "national,lp5521"; - reg = <0x34>; - label = "lp5521_sec"; - clock-mode = /bits/ 8 <2>; - chan0 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - }; - chan1 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - }; - chan2 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - }; - }; - bh1780@29 { - compatible = "rohm,bh1780gli"; - reg = <0x29>; - }; - }; - - i2c@80110000 { - pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c3_default_mode>; - pinctrl-1 = <&i2c3_sleep_mode>; - }; - - /* ST6G3244ME level translator for 1.8/2.9 V */ - vmmci: regulator-gpio { - compatible = "regulator-gpio"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-name = "mmci-reg"; - regulator-type = "voltage"; - - startup-delay-us = <100>; - - states = <1800000 0x1 - 2900000 0x0>; - }; - - // External Micro SD slot - sdi0_per1@80126000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - full-pwr-cycle; - st,sig-dir-dat0; - st,sig-dir-dat2; - st,sig-dir-cmd; - st,sig-pin-fbclk; - vmmc-supply = <&ab8500_ldo_aux3_reg>; - vqmmc-supply = <&vmmci>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi0_default_mode>; - pinctrl-1 = <&sdi0_sleep_mode>; - - status = "okay"; - }; - - // WLAN SDIO channel - sdi1_per2@80118000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - non-removable; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi1_default_mode>; - pinctrl-1 = <&sdi1_sleep_mode>; - - status = "okay"; - }; - - // PoP:ed eMMC - sdi2_per3@80005000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - cap-mmc-highspeed; - non-removable; - vmmc-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi2_default_mode>; - pinctrl-1 = <&sdi2_sleep_mode>; - - status = "okay"; - }; - - // On-board eMMC - sdi4_per2@80114000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - cap-mmc-highspeed; - non-removable; - vmmc-supply = <&ab8500_ldo_aux2_reg>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi4_default_mode>; - pinctrl-1 = <&sdi4_sleep_mode>; - - status = "okay"; - }; - - msp0: msp@80123000 { - pinctrl-names = "default"; - pinctrl-0 = <&msp0_default_mode>; - status = "okay"; - }; - - msp1: msp@80124000 { - pinctrl-names = "default"; - pinctrl-0 = <&msp1_default_mode>; - status = "okay"; - }; - - msp2: msp@80117000 { - pinctrl-names = "default"; - pinctrl-0 = <&msp2_default_mode>; - }; - - msp3: msp@80125000 { - status = "okay"; - }; - - prcmu@80157000 { - ab8500 { - ab8500-gpio { - }; - - ab8500_usb { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - - ab8500-regulators { - ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-name = "V-DISPLAY"; - }; - - ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { - regulator-name = "V-eMMC1"; - }; - - ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { - regulator-name = "V-MMC-SD"; - }; - - ab8500_ldo_intcore_reg: ab8500_ldo_intcore { - regulator-name = "V-INTCORE"; - }; - - ab8500_ldo_tvout_reg: ab8500_ldo_tvout { - regulator-name = "V-TVOUT"; - }; - - ab8500_ldo_audio_reg: ab8500_ldo_audio { - regulator-name = "V-AUD"; - }; - - ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { - regulator-name = "V-AMIC1"; - }; - - ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { - regulator-name = "V-AMIC2"; - }; - - ab8500_ldo_dmic_reg: ab8500_ldo_dmic { - regulator-name = "V-DMIC"; - }; - - ab8500_ldo_ana_reg: ab8500_ldo_ana { - regulator-name = "V-CSI/DSI"; - }; - }; - }; - }; - - mcde@a0350000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&lcd_default_mode>; - pinctrl-1 = <&lcd_sleep_mode>; - }; - }; -}; |