summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/ste-ux500-samsung-janice.dts')
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-janice.dts44
1 files changed, 43 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 42762bfcd878..e6d4fd0eb5f4 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -485,7 +485,26 @@
/* CTS/RTS is not used, CTS is repurposed as GPIO */
pinctrl-0 = <&u1rxtx_a_1_default>;
pinctrl-1 = <&u1rxtx_a_1_sleep>;
- /* FIXME: add a device for the GPS here */
+
+ gnss {
+ /*
+ * The Low Noise Amplifier (LNA) power and enablement is controlled
+ * autonomously by the GSD4t.
+ * Janice has a SiRFstarIV-based GSD4t
+ * Golden has a SiRFstarV 5t-based CSRG05TA03-ICJE-R.
+ */
+ compatible = "csr,gsd4t";
+ /* GPS_RSTN on GPIO21 */
+ reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ /* GPS_ON_OFF on GPIO96 */
+ sirf,onoff-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ /* GPS_1V8 (VSMPS2) */
+ vcc-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsd4t_janice_default>;
+ /* According to /etc/sirfgps.conf */
+ current-speed = <460800>;
+ };
};
/* Debugging console UART connected to TSU6111RSVR (FSA880) */
@@ -504,6 +523,10 @@
pinctrl-1 = <&usb_a_1_sleep>;
};
+ ab8500_fg {
+ line-impedance-micro-ohms = <15000>;
+ };
+
regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
@@ -941,4 +964,23 @@
};
};
};
+ gsd4t {
+ gsd4t_janice_default: gsd4t_janice {
+ /* Reset line, start out asserted */
+ janice_cfg1 {
+ pins = "GPIO21_AB3";
+ ste,config = <&gpio_out_lo>;
+ };
+ /* GPS_ON_OFF, start out deasserted (off) */
+ janice_cfg2 {
+ pins = "GPIO96_D8";
+ ste,config = <&gpio_out_lo>;
+ };
+ /* Unused power enablement line, used in R0.0 and R0.1 boards */
+ janice_cfg3 {
+ pins = "GPIO86_C6";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
};