diff options
Diffstat (limited to 'arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts')
| -rw-r--r-- | arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 153 |
1 files changed, 0 insertions, 153 deletions
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts deleted file mode 100644 index d277d043031b..000000000000 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ /dev/null @@ -1,153 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> - * - * Based on sun8i-h3-bananapi-m2-plus.dts, which is: - * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> - */ - -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Banana Pi BPI-M2-Zero"; - compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus"; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - pwr_led { - label = "bananapi-m2-zero:red:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - - sw4 { - label = "power"; - linux,code = <BTN_0>; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; - - reg_vdd_cpux: vdd-cpux-regulator { - compatible = "regulator-gpio"; - regulator-name = "vdd-cpux"; - regulator-type = "voltage"; - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-ramp-delay = <50>; /* 4ms */ - - gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ - enable-active-high; - gpios-states = <0x1>; - states = <1100000 0>, <1300000 1>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - clocks = <&rtc 1>; - clock-names = "ext_clock"; - }; -}; - -&cpu0 { - cpu-supply = <®_vdd_cpux>; -}; - -&ehci0 { - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - /* - * On the production batch of this board the card detect GPIO is - * high active (card inserted), although on the early samples it's - * low active. - */ - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&pio>; - interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ - interrupt-names = "host-wake"; - }; -}; - -&ohci0 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pa_pins>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - uart-has-rtscts; - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - clocks = <&rtc 1>; - clock-names = "lpo"; - vbat-supply = <®_vcc3v3>; - vddio-supply = <®_vcc3v3>; - device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ - host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ - shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ - }; - -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ - /* - * There're two micro-USB connectors, one is power-only and another is - * OTG. The Vbus of these two connectors are connected together, so - * the external USB device will be powered just by the power input - * from the power-only USB port. - */ - status = "okay"; -}; |