summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sun9i-a80-optimus.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/sun9i-a80-optimus.dts')
-rw-r--r--arch/arm/boot/dts/sun9i-a80-optimus.dts44
1 files changed, 41 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 58a199b0e494..864715ec3cb0 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -120,6 +120,19 @@
status = "okay";
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_rgmii_pins>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <&reg_cldo1>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
@@ -172,10 +185,26 @@
clocks = <&ac100_rtc 0>;
};
+&pio {
+ vcc-pa-supply = <&reg_ldo_io1>;
+ vcc-pb-supply = <&reg_aldo2>;
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_eldo2>;
+ vcc-pf-supply = <&reg_dcdc1>;
+ vcc-pg-supply = <&reg_ldo_io0>;
+ vcc-ph-supply = <&reg_dcdc1>;
+};
+
&r_ir {
status = "okay";
};
+&r_pio {
+ vcc-pl-supply = <&reg_dldo2>;
+ vcc-pm-supply = <&reg_eldo3>;
+};
+
&r_rsb {
status = "okay";
@@ -213,6 +242,10 @@
regulator-name = "vdd-cpus-09-usbh";
};
+ dc1sw {
+ /* unused */
+ };
+
reg_dcdc1: dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
@@ -260,7 +293,6 @@
};
reg_dldo2: dldo2 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pl";
@@ -279,14 +311,12 @@
};
reg_eldo3: eldo3 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pm-codec-io1";
};
reg_ldo_io0: ldo_io0 {
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pg";
@@ -374,6 +404,14 @@
*/
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ /*
+ * The PHY requires 20ms after all voltages
+ * are applied until core logic is ready and
+ * 30ms after the reset pin is de-asserted.
+ * Set a 100ms delay to account for PMIC
+ * ramp time and board traces.
+ */
+ regulator-enable-ramp-delay = <100000>;
regulator-name = "vcc-gmac-phy";
};