diff options
Diffstat (limited to 'arch/arm/boot/dts/ti/omap/am3517.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/ti/omap/am3517.dtsi | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ti/omap/am3517.dtsi b/arch/arm/boot/dts/ti/omap/am3517.dtsi new file mode 100644 index 000000000000..19aad715dff7 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/am3517.dtsi @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree Source for am3517 SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include "omap3.dtsi" + +/* AM3517 doesn't appear to have the crypto engines defined in omap3.dtsi */ +/delete-node/ &aes1_target; +/delete-node/ &aes2_target; + +/ { + aliases { + serial3 = &uart4; + can = &hecc; + ethernet = &davinci_emac; + }; + + cpus { + cpu: cpu@0 { + /* Based on OMAP3630 variants OPP50 and OPP100 */ + operating-points-v2 = <&cpu0_opp_table>; + + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + /* + * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx + * appear to operate at 300MHz as well. Since AM3517 only + * lists one operating voltage, it will remain fixed at 1.2V + */ + opp-50-300000000 { + /* OPP50 */ + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + opp-suspend; + }; + + opp-100-600000000 { + /* OPP100 */ + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000>; + opp-supported-hw = <0xffffffff 0xffffffff>; + }; + }; + + ocp@68000000 { + target-module@5c040000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5c040400 0x4>, + <0x5c040404 0x4>, + <0x5c040408 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + clocks = <&hsotgusb_ick_am35xx>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5c040000 0x1000>; + + am35x_otg_hs: am35x_otg_hs@0 { + compatible = "ti,omap3-musb"; + status = "disabled"; + reg = <0 0x1000>; + interrupts = <71>; + interrupt-names = "mc"; + }; + }; + + davinci_emac: ethernet@5c000000 { + compatible = "ti,am3517-emac"; + ti,hwmods = "davinci_emac"; + status = "disabled"; + reg = <0x5c000000 0x30000>; + interrupts = <67 68 69 70>; + syscon = <&scm_conf>; + ti,davinci-ctrl-reg-offset = <0x10000>; + ti,davinci-ctrl-mod-reg-offset = <0>; + ti,davinci-ctrl-ram-offset = <0x20000>; + ti,davinci-ctrl-ram-size = <0x2000>; + ti,davinci-rmii-en = /bits/ 8 <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + clocks = <&emac_ick>; + clock-names = "ick"; + }; + + davinci_mdio: mdio@5c030000 { + compatible = "ti,davinci_mdio"; + ti,hwmods = "davinci_mdio"; + status = "disabled"; + reg = <0x5c030000 0x1000>; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&emac_fck>; + clock-names = "fck"; + }; + + uart4: serial@4809e000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + status = "disabled"; + reg = <0x4809e000 0x400>; + interrupts = <84>; + dmas = <&sdma 55 &sdma 54>; + dma-names = "tx", "rx"; + clock-frequency = <48000000>; + }; + + omap3_pmx_core2: pinmux@480025d8 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x480025d8 0x24>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; + + hecc: can@5c050000 { + compatible = "ti,am3517-hecc"; + status = "disabled"; + reg = <0x5c050000 0x80>, + <0x5c053000 0x180>, + <0x5c052000 0x200>; + reg-names = "hecc", "hecc-ram", "mbx"; + interrupts = <24>; + clocks = <&hecc_ck>; + }; + + /* + * On am3517 the OCP registers do not seem to be accessible + * similar to the omap34xx. Maybe SGX is permanently set to + * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is + * write-only at 0x50000e10. We detect SGX based on the SGX + * revision register instead of the unreadable OCP revision + * register. + */ + sgx_module: target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000014 0x4>; + reg-names = "rev"; + clocks = <&sgx_fck>, <&sgx_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x10000>; + + gpu@0 { + compatible = "ti,omap3430-gpu", "img,powervr-sgx530"; + reg = <0x0 0x10000>; /* 64kB */ + interrupts = <21>; + }; + }; + }; +}; + +/* Not currently working, probably needs at least different clocks */ +&rng_target { + status = "disabled"; + /delete-property/ clocks; +}; + +/* Table Table 5-79 of the TRM shows 480ab000 is reserved */ +&usb_otg_target { + status = "disabled"; +}; + +&iva { + status = "disabled"; +}; + +&mailbox { + status = "disabled"; +}; + +&mmu_isp { + status = "disabled"; +}; + +#include "am35xx-clocks.dtsi" +#include "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt1_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt2_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; |