summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/ti/omap/dm816x.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/ti/omap/dm816x.dtsi')
-rw-r--r--arch/arm/boot/dts/ti/omap/dm816x.dtsi691
1 files changed, 691 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ti/omap/dm816x.dtsi b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
new file mode 100644
index 000000000000..b68686f0643b
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm816.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+/ {
+ compatible = "ti,dm816";
+ interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ ethernet0 = &eth0;
+ ethernet1 = &eth1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a8-pmu";
+ interrupts = <3>;
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is used for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the dm816x interconnect.
+ * The real dm816x interconnect network is quite complex. Since
+ * it will not bring real advantage to represent that in DT
+ * for the moment, just use a fake OCP bus entry to represent
+ * the whole bus hierarchy.
+ */
+ ocp {
+ compatible = "simple-bus";
+ reg = <0x44000000 0x10000>;
+ interrupts = <9 10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ prcm: prcm@48180000 {
+ compatible = "ti,dm816-prcm", "simple-bus";
+ reg = <0x48180000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48180000 0x4000>;
+
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prcm_clockdomains: clockdomains {
+ };
+ };
+
+ scrm: scrm@48140000 {
+ compatible = "ti,dm816-scrm", "simple-bus";
+ reg = <0x48140000 0x21000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #pinctrl-cells = <1>;
+ ranges = <0 0x48140000 0x21000>;
+
+ dm816x_pinmux: pinmux@800 {
+ compatible = "pinctrl-single";
+ reg = <0x800 0x50a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xf>;
+ };
+
+ /* Device Configuration Registers */
+ scm_conf: syscon@600 {
+ compatible = "syscon", "simple-bus";
+ reg = <0x600 0x110>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x600 0x110>;
+
+ usb_phy0: usb-phy@20 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x20 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
+
+ usb_phy1: usb-phy@28 {
+ compatible = "ti,dm8168-usb-phy";
+ reg = <0x28 0x8>;
+ reg-names = "phy";
+ clocks = <&main_fapll 6>;
+ clock-names = "refclk";
+ #phy-cells = <0>;
+ syscon = <&scm_conf>;
+ };
+ };
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scrm_clockdomains: clockdomains {
+ };
+ };
+
+ target-module@49000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49000000 0x4>;
+ reg-names = "rev";
+ clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49000000 0x10000>;
+
+ edma: dma@0 {
+ compatible = "ti,edma3-tpcc";
+ reg = <0 0x10000>;
+ reg-names = "edma3_cc";
+ interrupts = <12 13 14>;
+ interrupt-names = "edma3_ccint", "edma3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+ <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+ ti,edma-memcpy-channels = <20 21>;
+ };
+ };
+
+ target-module@49800000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49800000 0x4>,
+ <0x49800010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49800000 0x100000>;
+
+ edma_tptc0: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <112>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49900000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49900000 0x4>,
+ <0x49900010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49900000 0x100000>;
+
+ edma_tptc1: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <113>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49a00000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49a00000 0x4>,
+ <0x49a00010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49a00000 0x100000>;
+
+ edma_tptc2: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <114>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@49b00000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x49b00000 0x4>,
+ <0x49b00010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x49b00000 0x100000>;
+
+ edma_tptc3: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <115>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ elm: elm@48080000 {
+ compatible = "ti,am3352-elm";
+ ti,hwmods = "elm";
+ reg = <0x48080000 0x2000>;
+ interrupts = <4>;
+ };
+
+ gpio1: gpio@48032000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio1";
+ ti,gpio-always-on;
+ reg = <0x48032000 0x1000>;
+ interrupts = <96>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@4804c000 {
+ compatible = "ti,omap4-gpio";
+ ti,hwmods = "gpio2";
+ ti,gpio-always-on;
+ reg = <0x4804c000 0x1000>;
+ interrupts = <98>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ ti,hwmods = "gpmc";
+ reg = <0x50000000 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupts = <100>;
+ dmas = <&edma 52 0>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <6>;
+ gpmc,num-waitpins = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ i2c1: i2c@48028000 {
+ compatible = "ti,omap4-i2c";
+ ti,hwmods = "i2c1";
+ reg = <0x48028000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <70>;
+ };
+
+ i2c2: i2c@4802a000 {
+ compatible = "ti,omap4-i2c";
+ ti,hwmods = "i2c2";
+ reg = <0x4802a000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <71>;
+ };
+
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,dm816-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48200000 0x1000>;
+ };
+
+ rtc: rtc@480c0000 {
+ compatible = "ti,am3352-rtc", "ti,da830-rtc";
+ reg = <0x480c0000 0x1000>;
+ interrupts = <75 76>;
+ ti,hwmods = "rtc";
+ };
+
+ mailbox: mailbox@480c8000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x480c8000 0x2000>;
+ interrupts = <77>;
+ ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <12>;
+ mbox_dsp: mbox-dsp {
+ ti,mbox-tx = <3 0 0>;
+ ti,mbox-rx = <0 0 0>;
+ };
+ };
+
+ spinbox: spinbox@480ca000 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x480ca000 0x2000>;
+ ti,hwmods = "spinbox";
+ #hwlock-cells = <1>;
+ };
+
+ mdio: mdio@4a100800 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4a100800 0x100>;
+ ti,hwmods = "davinci_mdio";
+ bus_freq = <1000000>;
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <2>;
+ };
+ };
+
+ eth0: ethernet@4a100000 {
+ compatible = "ti,dm816-emac";
+ ti,hwmods = "emac0";
+ reg = <0x4a100000 0x800
+ 0x4a100900 0x3700>;
+ clocks = <&sysclk24_ck>;
+ syscon = <&scm_conf>;
+ ti,davinci-ctrl-reg-offset = <0>;
+ ti,davinci-ctrl-mod-reg-offset = <0x900>;
+ ti,davinci-ctrl-ram-offset = <0x2000>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ interrupts = <40 41 42 43>;
+ phy-handle = <&phy0>;
+ };
+
+ eth1: ethernet@4a120000 {
+ compatible = "ti,dm816-emac";
+ ti,hwmods = "emac1";
+ reg = <0x4a120000 0x4000>;
+ clocks = <&sysclk24_ck>;
+ syscon = <&scm_conf>;
+ ti,davinci-ctrl-reg-offset = <0>;
+ ti,davinci-ctrl-mod-reg-offset = <0x900>;
+ ti,davinci-ctrl-ram-offset = <0x2000>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ interrupts = <44 45 46 47>;
+ phy-handle = <&phy1>;
+ };
+
+ sata: sata@4a140000 {
+ compatible = "ti,dm816-ahci";
+ reg = <0x4a140000 0x10000>;
+ interrupts = <16>;
+ ti,hwmods = "sata";
+ };
+
+ mcspi1: spi@48030000 {
+ compatible = "ti,omap4-mcspi";
+ reg = <0x48030000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <65>;
+ ti,spi-num-cs = <4>;
+ ti,hwmods = "mcspi1";
+ dmas = <&edma 16 0 &edma 17 0
+ &edma 18 0 &edma 19 0
+ &edma 20 0 &edma 21 0
+ &edma 22 0 &edma 23 0>;
+ dma-names = "tx0", "rx0", "tx1", "rx1",
+ "tx2", "rx2", "tx3", "rx3";
+ };
+
+ mmc1: mmc@48060000 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x48060000 0x11000>;
+ ti,hwmods = "mmc1";
+ interrupts = <64>;
+ dmas = <&edma 24 0 &edma 25 0>;
+ dma-names = "tx", "rx";
+ };
+
+ timer1_target: target-module@4802e000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x4802e000 0x4>,
+ <0x4802e010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4802e000 0x1000>;
+
+ timer1: timer@0 {
+ compatible = "ti,dm816-timer";
+ reg = <0 0x1000>;
+ interrupts = <67>;
+ ti,timer-alwon;
+ clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
+ clock-names = "fck";
+ };
+ };
+
+ timer2_target: target-module@48040000 {
+ compatible = "ti,sysc-omap4-timer", "ti,sysc";
+ reg = <0x48040000 0x4>,
+ <0x48040010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x48040000 0x1000>;
+
+ timer2: timer@0 {
+ compatible = "ti,dm816-timer";
+ reg = <0 0x1000>;
+ interrupts = <68>;
+ clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
+ clock-names = "fck";
+ };
+ };
+
+ timer3: timer@48042000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48042000 0x2000>;
+ interrupts = <69>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@48044000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48044000 0x2000>;
+ interrupts = <92>;
+ ti,hwmods = "timer4";
+ ti,timer-pwm;
+ };
+
+ timer5: timer@48046000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48046000 0x2000>;
+ interrupts = <93>;
+ ti,hwmods = "timer5";
+ ti,timer-pwm;
+ };
+
+ timer6: timer@48048000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x48048000 0x2000>;
+ interrupts = <94>;
+ ti,hwmods = "timer6";
+ ti,timer-pwm;
+ };
+
+ timer7: timer@4804a000 {
+ compatible = "ti,dm816-timer";
+ reg = <0x4804a000 0x2000>;
+ interrupts = <95>;
+ ti,hwmods = "timer7";
+ ti,timer-pwm;
+ };
+
+ uart1: serial@48020000 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ ti,hwmods = "uart1";
+ reg = <0x48020000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <72>;
+ dmas = <&edma 26 0 &edma 27 0>;
+ dma-names = "tx", "rx";
+ };
+
+ uart2: serial@48022000 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ ti,hwmods = "uart2";
+ reg = <0x48022000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <73>;
+ dmas = <&edma 28 0 &edma 29 0>;
+ dma-names = "tx", "rx";
+ };
+
+ uart3: serial@48024000 {
+ compatible = "ti,am3352-uart", "ti,omap3-uart";
+ ti,hwmods = "uart3";
+ reg = <0x48024000 0x2000>;
+ clock-frequency = <48000000>;
+ interrupts = <74>;
+ dmas = <&edma 30 0 &edma 31 0>;
+ dma-names = "tx", "rx";
+ };
+
+ /* NOTE: USB needs a transceiver driver for phys to work */
+ usb: usb_otg_hs@47401000 {
+ compatible = "ti,am33xx-usb";
+ reg = <0x47401000 0x400000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ti,hwmods = "usb_otg_hs";
+
+ usb0: usb@47401000 {
+ compatible = "ti,musb-dm816";
+ reg = <0x47401400 0x400
+ 0x47401000 0x200>;
+ reg-names = "mc", "control";
+ interrupts = <18>;
+ interrupt-names = "mc";
+ dr_mode = "host";
+ interface-type = <0>;
+ phys = <&usb_phy0>;
+ phy-names = "usb2-phy";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 4 0 &cppi41dma 5 0
+ &cppi41dma 6 0 &cppi41dma 7 0
+ &cppi41dma 8 0 &cppi41dma 9 0
+ &cppi41dma 10 0 &cppi41dma 11 0
+ &cppi41dma 12 0 &cppi41dma 13 0
+ &cppi41dma 14 0 &cppi41dma 0 1
+ &cppi41dma 1 1 &cppi41dma 2 1
+ &cppi41dma 3 1 &cppi41dma 4 1
+ &cppi41dma 5 1 &cppi41dma 6 1
+ &cppi41dma 7 1 &cppi41dma 8 1
+ &cppi41dma 9 1 &cppi41dma 10 1
+ &cppi41dma 11 1 &cppi41dma 12 1
+ &cppi41dma 13 1 &cppi41dma 14 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ usb1: usb@47401800 {
+ compatible = "ti,musb-dm816";
+ reg = <0x47401c00 0x400
+ 0x47401800 0x200>;
+ reg-names = "mc", "control";
+ interrupts = <19>;
+ interrupt-names = "mc";
+ dr_mode = "host";
+ interface-type = <0>;
+ phys = <&usb_phy1>;
+ phy-names = "usb2-phy";
+ mentor,multipoint = <1>;
+ mentor,num-eps = <16>;
+ mentor,ram-bits = <12>;
+ mentor,power = <500>;
+
+ dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+ &cppi41dma 17 0 &cppi41dma 18 0
+ &cppi41dma 19 0 &cppi41dma 20 0
+ &cppi41dma 21 0 &cppi41dma 22 0
+ &cppi41dma 23 0 &cppi41dma 24 0
+ &cppi41dma 25 0 &cppi41dma 26 0
+ &cppi41dma 27 0 &cppi41dma 28 0
+ &cppi41dma 29 0 &cppi41dma 15 1
+ &cppi41dma 16 1 &cppi41dma 17 1
+ &cppi41dma 18 1 &cppi41dma 19 1
+ &cppi41dma 20 1 &cppi41dma 21 1
+ &cppi41dma 22 1 &cppi41dma 23 1
+ &cppi41dma 24 1 &cppi41dma 25 1
+ &cppi41dma 26 1 &cppi41dma 27 1
+ &cppi41dma 28 1 &cppi41dma 29 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+ "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+ "rx14", "rx15",
+ "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+ "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+ "tx14", "tx15";
+ };
+
+ cppi41dma: dma-controller@47402000 {
+ compatible = "ti,am3359-cppi41";
+ reg = <0x47400000 0x1000
+ 0x47402000 0x1000
+ 0x47403000 0x1000
+ 0x47404000 0x4000>;
+ reg-names = "glue", "controller", "scheduler", "queuemgr";
+ interrupts = <17>;
+ interrupt-names = "glue";
+ #dma-cells = <2>;
+ /* For backwards compatibility: */
+ #dma-channels = <30>;
+ dma-channels = <30>;
+ #dma-requests = <256>;
+ dma-requests = <256>;
+ };
+ };
+
+ wd_timer2: wd_timer@480c2000 {
+ compatible = "ti,omap3-wdt";
+ ti,hwmods = "wd_timer";
+ reg = <0x480c2000 0x1000>;
+ interrupts = <0>;
+ };
+ };
+};
+
+#include "dm816x-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&timer1_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&timer2_fck>;
+ assigned-clock-parents = <&sys_clkin_ck>;
+ };
+};
generated by cgit (git 2.34.1) at 2024-05-09 18:29:10 +0000