diff options
Diffstat (limited to 'arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi')
-rw-r--r-- | arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi | 458 |
1 files changed, 458 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi new file mode 100644 index 000000000000..a0c53d9c2625 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "omap443x.dtsi" +#include "motorola-cpcap-mapphone.dtsi" + +/ { + /* + * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, + * then 1023 - 1024 seems to contain mbm. + */ + memory { + device_type = "memory"; + reg = <0x80000000 0x3fd00000>; /* 1021 MB */ + }; + + /* Poweroff GPIO probably connected to CPCAP */ + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff_gpio>; + pinctrl-names = "default"; + gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + pinctrl-0 = <&hdmi_hpd_gpio>; + pinctrl-names = "default"; + label = "hdmi"; + type = "d"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + /* + * HDMI 5V regulator probably sourced from battery. Let's keep + * keep this as always enabled for HDMI to work until we've + * figured what the encoder chip is. + */ + hdmi_regulator: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "hdmi"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ + enable-active-high; + regulator-always-on; + }; + + /* This is probably coming straight from the battery.. */ + wl12xx_vmmc: regulator-wl12xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + soundcard { + compatible = "audio-graph-card"; + label = "Mapphone Audio"; + + widgets = + "Speaker", "Earpiece", + "Speaker", "Loudspeaker", + "Headphone", "Headphone Jack", + "Microphone", "Internal Mic"; + + routing = + "Earpiece", "EP", + "Loudspeaker", "SPKR", + "Headphone Jack", "HSL", + "Headphone Jack", "HSR", + "MICR", "Internal Mic"; + + dais = <&mcbsp2_port>, <&mcbsp3_port>; + }; +}; + +&cpu_thermal { + polling-delay = <10000>; /* milliseconds */ +}; + +&cpu_alert0 { + temperature = <80000>; /* millicelsius */ +}; + +&cpu0 { + /* + * Note that the 1.2GiHz mode is enabled for all SoC variants for + * the Motorola Android Linux v3.0.8 based kernel. + */ + operating-points = < + /* kHz uV */ + 300000 1025000 + 600000 1200000 + 800000 1313000 + 1008000 1375000 + 1200000 1375000 + >; +}; + +&dss { + status = "okay"; +}; + +&hdmi { + status = "okay"; + pinctrl-0 = <&dss_hdmi_pins>; + pinctrl-names = "default"; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +}; + +&i2c1 { + tmp105@48 { + compatible = "ti,tmp105"; + reg = <0x48>; + pinctrl-0 = <&tmp105_irq>; + pinctrl-names = "default"; + /* kpd_row0.gpio_178 */ + interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING + &omap4_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; +}; + +&mmc1 { + vmmc-supply = <&vwlan2>; + bus-width = <4>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ +}; + +&mmc2 { + vmmc-supply = <&vsdio>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + vmmc-supply = <&wl12xx_vmmc>; + /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xde>; + interrupt-names = "irq", "wakeup"; + non-removable; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1285"; + reg = <2>; + /* gpio_100 with gpmc_wait2 pad as wakeirq */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, + <&omap4_pmx_core 0x4e>; + interrupt-names = "irq", "wakeup"; + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&omap4_pmx_core { + + /* hdmi_hpd.gpio_63 */ + hdmi_hpd_gpio: hdmi-hpd-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) + >; + }; + + /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ + dss_hdmi_pins: dss-hdmi-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) + >; + }; + + /* + * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3 + * for gpio_100, but the internal pull makes wlan flakey on some + * devices. Off mode value should be tested if we have off mode working + * later on. + */ + mmc3_pins: mmc3-pins { + pinctrl-single,pins = < + /* 0x4a10008e gpmc_wait2.gpio_100 d23 */ + OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3) + + /* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */ + OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */ + OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */ + OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1) + + /* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */ + OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */ + OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; + + /* gpmc_ncs0.gpio_50 */ + poweroff_gpio: poweroff-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) + >; + }; + + /* kpd_row0.gpio_178 */ + tmp105_irq: tmp105-irq-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_gpio_mux_sel1: usb-gpio-mux-sel1-pins { + /* gpio_60 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) + >; + }; + + usb_ulpi_pins: usb-ulpi-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + /* usb0_otg_dp and usb0_otg_dm */ + usb_utmi_pins: usb-utmi-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + /* + * Note that the v3.0.8 stock userspace dynamically remuxes uart1 + * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 + * when not used. If needed, we can add rts pin remux later based + * on power measurements. + */ + uart1_pins: uart1-pins { + pinctrl-single,pins = < + /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ + OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ + OMAP4_IOPAD(0x13e, MUX_MODE1) + + /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ + OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) + + /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ + OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + /* uart3_tx_irtx and uart3_rx_irrx */ + uart3_pins: uart3-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, MUX_MODE2) + OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + uart4_pins: uart4-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ + OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ + OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ + OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ + >; + }; + + mcbsp2_pins: mcbsp2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ + OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ + OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ + OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ + >; + }; + + mcbsp3_pins: mcbsp3-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ + OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ + OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ + OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ + >; + }; +}; + +&omap4_pmx_wkup { + usb_gpio_mux_sel2: usb-gpio-mux-sel2-pins { + /* gpio_wk0 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +/* RNG is used by secure mode and not accessible */ +&rng_target { + status = "disabled"; +}; + +/* + * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149 + * for wake-up events for both the USB PHY and the UART. We can use gpio_149 + * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we + * have gpio_149 trigger before the UART transfer starts. + */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x110>; + uart-has-rtscts; + current-speed = <115200>; +}; + +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x17c>; + overrun-throttle-ms = <500>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + bluetooth { + compatible = "ti,wl1285-st"; + enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ + max-speed = <3686400>; + }; +}; + +/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + + /* + * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4. + * VBUS Regulator Main Characteristics". Binding uses 2 mA units. + */ + power = <150>; +}; + +&mcbsp2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; + + mcbsp2_port: port { + cpu_dai2: endpoint { + dai-format = "i2s"; + remote-endpoint = <&cpcap_audio_codec0>; + frame-master = <&cpcap_audio_codec0>; + bitclock-master = <&cpcap_audio_codec0>; + }; + }; +}; + +&mcbsp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; + status = "okay"; + + mcbsp3_port: port { + cpu_dai3: endpoint { + dai-format = "dsp_a"; + frame-master = <&cpcap_audio_codec1>; + bitclock-master = <&cpcap_audio_codec1>; + remote-endpoint = <&cpcap_audio_codec1>; + }; + }; +}; + +&cpcap_audio_codec0 { + remote-endpoint = <&cpu_dai2>; +}; + +&cpcap_audio_codec1 { + remote-endpoint = <&cpu_dai3>; +}; |