1 files changed, 152 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ti/omap/omap3-gta04a5.dts b/arch/arm/boot/dts/ti/omap/omap3-gta04a5.dts
new file mode 100644
index 000000000000..8bd6b4b1f30b
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap3-gta04a5.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+	model = "Goldelico GTA04A5/Letux 2804";
+
+	sound {
+		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;	/* GTA04A5 only */
+	};
+
+	wlan_en: wlan_en_regulator {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* GPIO_138 */
+
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pps_pins>;
+
+		gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+	};
+
+};
+
+&gpio5 {
+	irda-en-hog {
+		gpio-hog;
+		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+		output-high;	/* activate gpio_175 to disable IrDA receiver */
+	};
+};
+
+&omap3_pmx_core {
+	bt_pins: bt-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat5 = mmc3_dat1 = gpio137 */
+		>;
+	};
+
+	wlan_pins: wlan-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat6 = mmc3_dat2 = gpio138 */
+		>;
+	};
+
+	wlan_irq_pin: wlan-irq-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4)	/* mmc2_dat7 = mmc3_dat3 = gpio139 */
+		>;
+	};
+
+	irda_pins: irda-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* mcspi1_cs1 = gpio175 */
+		>;
+	};
+
+	pps_pins: pps-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+		>;
+	};
+
+	bno050_pins: pinmux-bno050-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT | MUX_MODE4) /* gpin113 */
+		>;
+	};
+};
+
+/*
+ * for WL183x module see
+ * Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
+ */
+
+&wifi_pwrseq {
+	/delete-property/ reset-gpios;
+};
+
+&mmc2 {
+	vmmc-supply = <&wlan_en>;
+	bus-width = <4>;
+	cap-power-off-card;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wlan_irq_pin>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/delete-property/ mmc-pwrseq;
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_139 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&i2c2 {
+	/delete-node/ bmp085@77;
+	/delete-node/ bma180@41;
+	/delete-node/ itg3200@68;
+	/delete-node/ hmc5843@1e;
+
+	gyrometer@69 {
+		compatible = "bosch,bmg160";
+		reg = <0x69>;
+	};
+
+	accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+	};
+
+	bme280@76 {
+		compatible = "bosch,bme280";
+		reg = <0x76>;
+		vdda-supply = <&vio>;
+		vddd-supply = <&vio>;
+	};
+
+	imu@29 {
+		compatible = "bosch,bno055";
+		reg = <0x29>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bno050_pins>;
+		/* interrupt at &gpio4 17 */
+	};
+};