summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/ti/omap/omap3-n900.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/ti/omap/omap3-n900.dts')
-rw-r--r--arch/arm/boot/dts/ti/omap/omap3-n900.dts1159
1 files changed, 1159 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ti/omap/omap3-n900.dts b/arch/arm/boot/dts/ti/omap/omap3-n900.dts
new file mode 100644
index 000000000000..d33485341251
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap3-n900.dts
@@ -0,0 +1,1159 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+/*
+ * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
+ * for omap AES HW crypto support. When linux kernel try to access memory of AES
+ * blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
+ * and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
+ * crash anymore) omap AES support will be disabled for all Nokia N900 devices.
+ * There is "unofficial" version of bootloader which enables AES in L3 firewall
+ * but it is not widely used and to prevent kernel crash rather AES is disabled.
+ * There is also no runtime detection code if AES is disabled in L3 firewall...
+ */
+&aes1_target {
+ status = "disabled";
+};
+
+&aes2_target {
+ status = "disabled";
+};
+
+/ {
+ model = "Nokia N900";
+ compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
+
+ aliases {
+ i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ display0 = &lcd;
+ display1 = &tv;
+ };
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-heartbeat {
+ label = "debug::sleep";
+ gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */
+ linux,default-trigger = "default-on";
+ pinctrl-names = "default";
+ pinctrl-0 = <&debug_leds>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ camera_lens_cover {
+ label = "Camera Lens Cover";
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_CAMERA_LENS_COVER>;
+ linux,can-disable;
+ };
+
+ camera_focus {
+ label = "Camera Focus";
+ gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
+ linux,code = <KEY_CAMERA_FOCUS>;
+ linux,can-disable;
+ };
+
+ camera_capture {
+ label = "Camera Capture";
+ gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
+ linux,code = <KEY_CAMERA>;
+ linux,can-disable;
+ };
+
+ lock_button {
+ label = "Lock Button";
+ gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
+ linux,code = <KEY_SCREENLOCK>;
+ linux,can-disable;
+ };
+
+ keypad_slide {
+ label = "Keypad Slide";
+ gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_KEYPAD_SLIDE>;
+ linux,can-disable;
+ };
+
+ proximity_sensor {
+ label = "Proximity Sensor";
+ gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_FRONT_PROXIMITY>;
+ linux,can-disable;
+ };
+
+ machine_cover {
+ label = "Machine Cover";
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MACHINE_COVER>;
+ linux,can-disable;
+ };
+ };
+
+ isp1707: isp1707 {
+ compatible = "nxp,isp1707";
+ nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+ usb-phy = <&usb2_phy>;
+ };
+
+ tv: connector {
+ compatible = "composite-video-connector";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+
+ sound: n900-audio {
+ compatible = "nokia,n900-audio";
+
+ nokia,cpu-dai = <&mcbsp2>;
+ nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
+ nokia,headphone-amplifier = <&tpa6130a2>;
+
+ tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
+ jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
+ eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
+ speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ battery: n900-battery {
+ compatible = "nokia,n900-battery";
+ io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
+ io-channel-names = "temp", "bsi", "vbat";
+ };
+
+ pwm9: pwm-9 {
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x00>; /* timer_sys_ck */
+ };
+
+ ir: n900-ir {
+ compatible = "nokia,n900-ir";
+ pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+ };
+
+ rom_rng: rng {
+ compatible = "nokia,n900-rom-rng";
+ clocks = <&rng_ick>;
+ clock-names = "ick";
+ };
+
+ /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */
+ vctcxo: vctcxo {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
+};
+
+&isp {
+ vdds_csib-supply = <&vaux2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_pins>;
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ csi_isp: endpoint {
+ remote-endpoint = <&csi_cam1>;
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
+ clock-lanes = <1>;
+ data-lanes = <0>;
+ lane-polarity = <0 0>;
+ /* Select strobe = <1> for back camera, <0> for front camera */
+ strobe = <1>;
+ };
+ };
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+
+ uart2_pins: uart2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
+ >;
+ };
+
+ uart3_pins: uart3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
+ >;
+ };
+
+ ethernet_pins: ethernet-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */
+ OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
+ >;
+ };
+
+ gpmc_pins: gpmc-pins {
+ pinctrl-single,pins = <
+
+ /* address lines */
+ OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
+ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
+ OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
+
+ /* data lines, gpmc_d0..d7 not muxable according to TRM */
+ OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
+ OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
+ OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
+ OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
+
+ /*
+ * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+ * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+ */
+ OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
+ };
+
+ i2c1_pins: i2c1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ i2c2_pins: i2c2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: i2c3-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ debug_leds: debug-led-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
+ >;
+ };
+
+ mcspi4_pins: mcspi4-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+ >;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
+ >;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
+ >;
+ };
+
+ acx565akm_pins: acx565akm-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
+ >;
+ };
+
+ dss_sdi_pins: dss-sdi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
+
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
+ >;
+ };
+
+ wl1251_pins: wl1251-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
+ OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
+ >;
+ };
+
+ ssi_pins: ssi-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
+ OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
+ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
+ >;
+ };
+
+ modem_pins: modem-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
+ >;
+ };
+
+ camera_pins: camera-pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x210c, PIN_OUTPUT | MUX_MODE7) /* cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_OUTPUT | MUX_MODE7) /* cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE7) /* cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE0) /* cam_d8 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE0) /* cam_d9 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_OUTPUT | MUX_MODE7) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE7) /* cam_xclkb */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_OUTPUT | MUX_MODE0) /* cam_strobe */
+ >;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ clock-frequency = <2200000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&vaux1 {
+ regulator-name = "V28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+ regulator-always-on; /* due to battery cover sensor */
+};
+
+&vaux2 {
+ regulator-name = "VCSI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vaux3 {
+ regulator-name = "VMMC2_30";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vaux4 {
+ regulator-name = "VCAM_ANA_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vmmc1 {
+ regulator-name = "VMMC1";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vmmc2 {
+ regulator-name = "V28_A";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+ regulator-always-on; /* due VIO leak to AIC34 VDDs */
+};
+
+&vpll1 {
+ regulator-name = "VPLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+ regulator-always-on;
+};
+
+&vpll2 {
+ regulator-name = "VSDI_CSI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+ regulator-always-on;
+};
+
+&vsim {
+ regulator-name = "VMMC2_IO_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
+};
+
+&vio {
+ regulator-name = "VIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&vintana1 {
+ regulator-name = "VINTANA1";
+ /* fixed to 1500000 */
+ regulator-always-on;
+};
+
+&vintana2 {
+ regulator-name = "VINTANA2";
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ regulator-always-on;
+};
+
+&vintdig {
+ regulator-name = "VINTDIG";
+ /* fixed to 1500000 */
+ regulator-always-on;
+};
+
+/* First two dma channels are reserved on secure omap3 */
+&sdma {
+ dma-channel-mask = <0xfffffffc>;
+};
+
+&twl {
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ ti,enable-vibra = <1>;
+ };
+
+ twl_power: power {
+ compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+ ti,use_poweroff;
+ };
+};
+
+&twl_keypad {
+ linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
+ MATRIX_KEY(0x00, 0x01, KEY_O)
+ MATRIX_KEY(0x00, 0x02, KEY_P)
+ MATRIX_KEY(0x00, 0x03, KEY_COMMA)
+ MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
+ MATRIX_KEY(0x00, 0x06, KEY_A)
+ MATRIX_KEY(0x00, 0x07, KEY_S)
+
+ MATRIX_KEY(0x01, 0x00, KEY_W)
+ MATRIX_KEY(0x01, 0x01, KEY_D)
+ MATRIX_KEY(0x01, 0x02, KEY_F)
+ MATRIX_KEY(0x01, 0x03, KEY_G)
+ MATRIX_KEY(0x01, 0x04, KEY_H)
+ MATRIX_KEY(0x01, 0x05, KEY_J)
+ MATRIX_KEY(0x01, 0x06, KEY_K)
+ MATRIX_KEY(0x01, 0x07, KEY_L)
+
+ MATRIX_KEY(0x02, 0x00, KEY_E)
+ MATRIX_KEY(0x02, 0x01, KEY_DOT)
+ MATRIX_KEY(0x02, 0x02, KEY_UP)
+ MATRIX_KEY(0x02, 0x03, KEY_ENTER)
+ MATRIX_KEY(0x02, 0x05, KEY_Z)
+ MATRIX_KEY(0x02, 0x06, KEY_X)
+ MATRIX_KEY(0x02, 0x07, KEY_C)
+ MATRIX_KEY(0x02, 0x08, KEY_F9)
+
+ MATRIX_KEY(0x03, 0x00, KEY_R)
+ MATRIX_KEY(0x03, 0x01, KEY_V)
+ MATRIX_KEY(0x03, 0x02, KEY_B)
+ MATRIX_KEY(0x03, 0x03, KEY_N)
+ MATRIX_KEY(0x03, 0x04, KEY_M)
+ MATRIX_KEY(0x03, 0x05, KEY_SPACE)
+ MATRIX_KEY(0x03, 0x06, KEY_SPACE)
+ MATRIX_KEY(0x03, 0x07, KEY_LEFT)
+
+ MATRIX_KEY(0x04, 0x00, KEY_T)
+ MATRIX_KEY(0x04, 0x01, KEY_DOWN)
+ MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
+ MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
+ MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
+ MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
+ MATRIX_KEY(0x04, 0x08, KEY_F10)
+
+ MATRIX_KEY(0x05, 0x00, KEY_Y)
+ MATRIX_KEY(0x05, 0x08, KEY_F11)
+
+ MATRIX_KEY(0x06, 0x00, KEY_U)
+
+ MATRIX_KEY(0x07, 0x00, KEY_I)
+ MATRIX_KEY(0x07, 0x01, KEY_F7)
+ MATRIX_KEY(0x07, 0x02, KEY_F8)
+ >;
+};
+
+&twl_gpio {
+ ti,pullups = <0x0>;
+ ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ clock-frequency = <100000>;
+
+ tlv320aic3x: tlv320aic3x@18 {
+ compatible = "ti,tlv320aic3x";
+ reg = <0x18>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
+ ai3x-gpio-func = <
+ 0 /* AIC3X_GPIO1_FUNC_DISABLED */
+ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+ >;
+
+ AVDD-supply = <&vmmc2>;
+ DRVDD-supply = <&vmmc2>;
+ IOVDD-supply = <&vio>;
+ DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <1>;
+ };
+
+ tlv320aic3x_aux: tlv320aic3x@19 {
+ compatible = "ti,tlv320aic3x";
+ reg = <0x19>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */
+
+ AVDD-supply = <&vmmc2>;
+ DRVDD-supply = <&vmmc2>;
+ IOVDD-supply = <&vio>;
+ DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <2>;
+ };
+
+ tsl2563: tsl2563@29 {
+ compatible = "amstaos,tsl2563";
+ reg = <0x29>;
+
+ amstaos,cover-comp-gain = <16>;
+ };
+
+ adp1653: led-controller@30 {
+ compatible = "adi,adp1653";
+ reg = <0x30>;
+ enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
+
+ flash {
+ flash-timeout-us = <500000>;
+ flash-max-microamp = <320000>;
+ led-max-microamp = <50000>;
+ };
+ indicator {
+ led-max-microamp = <17500>;
+ };
+ };
+
+ lp5523: lp5523@32 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "national,lp5523";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+ enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+
+ led@0 {
+ reg = <0>;
+ chan-name = "lp5523:kb1";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+
+ led@1 {
+ reg = <1>;
+ chan-name = "lp5523:kb2";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+
+ led@2 {
+ reg = <2>;
+ chan-name = "lp5523:kb3";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+
+ led@3 {
+ reg = <3>;
+ chan-name = "lp5523:kb4";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+
+ led@4 {
+ reg = <4>;
+ chan-name = "lp5523:b";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@5 {
+ reg = <5>;
+ chan-name = "lp5523:g";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@6 {
+ reg = <6>;
+ chan-name = "lp5523:r";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ };
+
+ led@7 {
+ reg = <7>;
+ chan-name = "lp5523:kb5";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+
+ led@8 {
+ reg = <8>;
+ chan-name = "lp5523:kb6";
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ };
+ };
+
+ bq27200: bq27200@55 {
+ compatible = "ti,bq27200";
+ reg = <0x55>;
+ power-supplies = <&bq24150a>;
+ };
+
+ /* Stereo headphone amplifier */
+ tpa6130a2: tpa6130a2@60 {
+ compatible = "ti,tpa6130a2";
+ reg = <0x60>;
+
+ Vdd-supply = <&vmmc2>;
+
+ power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
+ };
+
+ si4713: si4713@63 {
+ compatible = "silabs,si4713";
+ reg = <0x63>;
+
+ interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+ reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+ vio-supply = <&vio>;
+ vdd-supply = <&vaux1>;
+ };
+
+ bq24150a: bq24150a@6b {
+ compatible = "ti,bq24150a";
+ reg = <0x6b>;
+
+ ti,current-limit = <100>;
+ ti,weak-battery-voltage = <3400>;
+ ti,battery-regulation-voltage = <4200>;
+ ti,charge-current = <650>;
+ ti,termination-current = <100>;
+ ti,resistor-sense = <68>;
+
+ ti,usb-charger-detection = <&isp1707>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+
+ accelerometer@1d {
+ compatible = "st,lis302dl";
+ reg = <0x1d>;
+
+ vdd-supply = <&vaux1>;
+ vddio-supply = <&vio>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>,
+ <20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */
+
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+
+ cam1: camera@3e {
+ compatible = "toshiba,et8ek8";
+ reg = <0x3e>;
+
+ vana-supply = <&vaux4>;
+
+ clocks = <&isp 0>;
+ clock-names = "extclk";
+ clock-frequency = <9600000>;
+
+ reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
+
+ lens-focus = <&ad5820>;
+
+ port {
+ csi_cam1: endpoint {
+ bus-type = <MEDIA_BUS_TYPE_CCP2>;
+ strobe = <1>;
+ clock-inv = <0>;
+ crc = <1>;
+
+ remote-endpoint = <&csi_isp>;
+ };
+ };
+ };
+
+ /* D/A converter for auto-focus */
+ ad5820: dac@c {
+ compatible = "adi,ad5820";
+ reg = <0x0c>;
+
+ VANA-supply = <&vaux4>;
+
+ #io-channel-cells = <0>;
+ };
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+};
+
+/* most boards use vaux3, only some old versions use vmmc2 instead */
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vaux3>;
+ vqmmc-supply = <&vsim>;
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&gpmc {
+ ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
+ <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
+
+ /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
+ onenand@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+
+ /*
+ * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+ * bootloader set values when booted with v5.1
+ * (OneNAND Manufacturer: Samsung):
+ *
+ * cs0 GPMC_CS_CONFIG1: 0xfb001202
+ * cs0 GPMC_CS_CONFIG2: 0x00111100
+ * cs0 GPMC_CS_CONFIG3: 0x00020200
+ * cs0 GPMC_CS_CONFIG4: 0x11001102
+ * cs0 GPMC_CS_CONFIG5: 0x03101616
+ * cs0 GPMC_CS_CONFIG6: 0x90060000
+ */
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,burst-length = <16>;
+ gpmc,burst-read;
+ gpmc,burst-wrap;
+ gpmc,burst-write;
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <102>;
+ gpmc,cs-wr-off-ns = <102>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <12>;
+ gpmc,adv-wr-off-ns = <12>;
+ gpmc,oe-on-ns = <12>;
+ gpmc,oe-off-ns = <102>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <102>;
+ gpmc,rd-cycle-ns = <132>;
+ gpmc,wr-cycle-ns = <132>;
+ gpmc,access-ns = <96>;
+ gpmc,page-burst-access-ns = <18>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <6>;
+ gpmc,wr-data-mux-bus-ns = <36>;
+ gpmc,wr-access-ns = <96>;
+ gpmc,sync-clk-ps = <15000>;
+
+ /*
+ * MTD partition table corresponding to Nokia's
+ * Maemo 5 (Fremantle) release.
+ */
+ partition@0 {
+ label = "bootloader";
+ reg = <0x00000000 0x00020000>;
+ read-only;
+ };
+ partition@1 {
+ label = "config";
+ reg = <0x00020000 0x00060000>;
+ };
+ partition@2 {
+ label = "log";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@3 {
+ label = "kernel";
+ reg = <0x000c0000 0x00200000>;
+ };
+ partition@4 {
+ label = "initfs";
+ reg = <0x002c0000 0x00200000>;
+ };
+ partition@5 {
+ label = "rootfs";
+ reg = <0x004c0000 0x0fb40000>;
+ };
+ };
+
+ /* Ethernet is on some early development boards and qemu */
+ ethernet@gpmc {
+ compatible = "smsc,lan91c94";
+ interrupt-parent = <&gpio2>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
+ reg = <1 0 0xf>; /* 16 byte IO range */
+ bank-width = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ethernet_pins>;
+ power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
+ reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <48>;
+ gpmc,cs-wr-off-ns = <24>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <0>;
+ gpmc,adv-wr-off-ns = <0>;
+ gpmc,we-on-ns = <12>;
+ gpmc,we-off-ns = <18>;
+ gpmc,oe-on-ns = <12>;
+ gpmc,oe-off-ns = <48>;
+ gpmc,page-burst-access-ns = <0>;
+ gpmc,access-ns = <42>;
+ gpmc,rd-cycle-ns = <180>;
+ gpmc,wr-cycle-ns = <180>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <12>;
+ };
+};
+
+&mcspi1 {
+ /*
+ * For some reason, touchscreen is necessary for screen to work at
+ * all on real hw. It works well without it on emulator.
+ *
+ * Also... order in the device tree actually matters here.
+ */
+ tsc2005@0 {
+ compatible = "ti,tsc2005";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+
+ vio-supply = <&vio>;
+
+ reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+ interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+
+ lcd: acx565akm@2 {
+ compatible = "sony,acx565akm";
+ spi-max-frequency = <6000000>;
+ reg = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&acx565akm_pins>;
+
+ label = "lcd";
+ reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&sdi_out>;
+ };
+ };
+ };
+};
+
+&mcspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi4_pins>;
+
+ wl1251@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl1251_pins>;
+
+ vio-supply = <&vio>;
+
+ compatible = "ti,wl1251";
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+
+ spi-cpol;
+ spi-cpha;
+
+ ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+ clocks = <&vctcxo>;
+ };
+};
+
+/* RNG not directly accessible on n900, see omap3-rom-rng instead */
+&rng_target {
+ status = "disabled";
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <2>;
+ power = <50>;
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+
+ bcm2048: bluetooth {
+ compatible = "brcm,bcm2048-nokia", "nokia,h4p-bluetooth";
+ reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; /* 91 */
+ host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
+ bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
+ clocks = <&vctcxo>;
+ clock-names = "sysclk";
+ };
+};
+
+&uart3 {
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&dss {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_sdi_pins>;
+
+ vdds_sdi-supply = <&vaux1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ sdi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ datapairs = <2>;
+ };
+ };
+ };
+};
+
+&venc {
+ status = "okay";
+
+ vdda-supply = <&vdac>;
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <1>;
+ };
+ };
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+&ssi_port1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssi_pins>;
+
+ ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+ modem: hsi-client {
+ compatible = "nokia,n900-modem";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&modem_pins>;
+
+ hsi-channel-ids = <0>, <1>, <2>, <3>;
+ hsi-channel-names = "mcsaab-control",
+ "speech-control",
+ "speech-data",
+ "mcsaab-data";
+ hsi-speed-kbps = <55000>;
+ hsi-mode = "frame";
+ hsi-flow = "synchronized";
+ hsi-arb-mode = "round-robin";
+
+ interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
+
+ gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
+ <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
+ <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
+ <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
+ <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
+ gpio-names = "cmt_apeslpx",
+ "cmt_rst_rq",
+ "cmt_en",
+ "cmt_rst",
+ "cmt_bsi";
+ };
+};
+
+&ssi_port2 {
+ status = "disabled";
+};
generated by cgit (git 2.34.1) at 2024-05-09 03:29:32 +0000