diff options
Diffstat (limited to 'arch/arm/boot/dts/vf610-zii-dev-rev-b.dts')
-rw-r--r-- | arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 451 |
1 files changed, 0 insertions, 451 deletions
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts deleted file mode 100644 index 48086c5e8549..000000000000 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ /dev/null @@ -1,451 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2015, 2016 Zodiac Inflight Innovations - */ - -/dts-v1/; -#include "vf610-zii-dev.dtsi" - -/ { - model = "ZII VF610 Development Board, Rev B"; - compatible = "zii,vf610dev-b", "zii,vf610dev", "fsl,vf610"; - - mdio-mux { - compatible = "mdio-mux-gpio"; - pinctrl-0 = <&pinctrl_mdio_mux>; - pinctrl-names = "default"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH - &gpio0 9 GPIO_ACTIVE_HIGH - &gpio0 24 GPIO_ACTIVE_HIGH - &gpio0 25 GPIO_ACTIVE_HIGH>; - mdio-parent-bus = <&mdio1>; - #address-cells = <1>; - #size-cells = <0>; - - mdio_mux_1: mdio@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - switch0: switch@0 { - compatible = "marvell,mv88e6085"; - pinctrl-0 = <&pinctrl_gpio_switch0>; - pinctrl-names = "default"; - reg = <0>; - dsa,member = <0 0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - eeprom-length = <512>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan0"; - phy-handle = <&switch0phy0>; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&switch0phy1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-handle = <&switch0phy2>; - }; - - switch0port5: port@5 { - reg = <5>; - label = "dsa"; - phy-mode = "rgmii-txid"; - link = <&switch1port6 - &switch2port9>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&fec1>; - - fixed-link { - speed = <100>; - full-duplex; - }; - }; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch0phy0: switch0phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - switch0phy1: switch1phy0@1 { - reg = <1>; - interrupt-parent = <&switch0>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; - }; - switch0phy2: switch1phy0@2 { - reg = <2>; - interrupt-parent = <&switch0>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; - }; - - mdio_mux_2: mdio@2 { - reg = <2>; - #address-cells = <1>; - #size-cells = <0>; - - switch1: switch@0 { - compatible = "marvell,mv88e6085"; - pinctrl-0 = <&pinctrl_gpio_switch1>; - pinctrl-names = "default"; - reg = <0>; - dsa,member = <0 1>; - interrupt-parent = <&gpio0>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - eeprom-length = <512>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan3"; - phy-handle = <&switch1phy0>; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-handle = <&switch1phy1>; - }; - - port@2 { - reg = <2>; - label = "lan5"; - phy-handle = <&switch1phy2>; - }; - - switch1port5: port@5 { - reg = <5>; - label = "dsa"; - link = <&switch2port9>; - phy-mode = "rgmii-txid"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch1port6: port@6 { - reg = <6>; - label = "dsa"; - phy-mode = "rgmii-txid"; - link = <&switch0port5>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch1>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - - switch1phy1: switch1phy0@1 { - reg = <1>; - interrupt-parent = <&switch1>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; - }; - - switch1phy2: switch1phy0@2 { - reg = <2>; - interrupt-parent = <&switch1>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; - }; - - mdio_mux_4: mdio@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - - switch2: switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - dsa,member = <0 2>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan6"; - phy-handle = <&switch2phy0>; - }; - - port@1 { - reg = <1>; - label = "lan7"; - phy-handle = <&switch2phy1>; - }; - - port@2 { - reg = <2>; - label = "lan8"; - phy-handle = <&switch2phy2>; - }; - - port@3 { - reg = <3>; - label = "optical3"; - - fixed-link { - speed = <1000>; - full-duplex; - link-gpios = <&gpio6 2 - GPIO_ACTIVE_HIGH>; - }; - }; - - port@4 { - reg = <4>; - label = "optical4"; - - fixed-link { - speed = <1000>; - full-duplex; - link-gpios = <&gpio6 3 - GPIO_ACTIVE_HIGH>; - }; - }; - - switch2port9: port@9 { - reg = <9>; - label = "dsa"; - phy-mode = "rgmii-txid"; - link = <&switch1port5 - &switch0port5>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch2phy0: phy@0 { - reg = <0>; - }; - switch2phy1: phy@1 { - reg = <1>; - }; - switch2phy2: phy@2 { - reg = <2>; - }; - }; - }; - }; - - mdio_mux_8: mdio@8 { - reg = <8>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - spi0 { - compatible = "spi-gpio"; - pinctrl-0 = <&pinctrl_gpio_spi0>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio1 11 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio1 10 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW - &gpio1 8 GPIO_ACTIVE_HIGH>; - num-chipselects = <2>; - - flash@0 { - compatible = "m25p128", "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <1000000>; - }; - - at93c46d@1 { - compatible = "atmel,at93c46d"; - pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>; - pinctrl-names = "default"; - #address-cells = <0>; - #size-cells = <0>; - reg = <1>; - spi-max-frequency = <500000>; - spi-cs-high; - data-size = <16>; - select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&i2c0 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - status = "okay"; - - gpio5: io-expander@20 { - compatible = "nxp,pca9554"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - - }; - - gpio6: io-expander@22 { - compatible = "nxp,pca9554"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pca9554_22>; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - interrupt-parent = <&gpio3>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - tca9548@70 { - compatible = "nxp,pca9548"; - pinctrl-0 = <&pinctrl_i2c_mux_reset>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; - - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - sfp1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - sfp2: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - sfp3: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - sfp4: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; - }; - - i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - }; -}; - - -&iomuxc { - pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 { - fsl,pins = < - VF610_PAD_PTE27__GPIO_132 0x33e2 - >; - }; - - pinctrl_gpio_spi0: pinctrl-gpio-spi0 { - fsl,pins = < - VF610_PAD_PTB22__GPIO_44 0x33e2 - VF610_PAD_PTB21__GPIO_43 0x33e2 - VF610_PAD_PTB20__GPIO_42 0x33e1 - VF610_PAD_PTB19__GPIO_41 0x33e2 - VF610_PAD_PTB18__GPIO_40 0x33e2 - >; - }; - - pinctrl_mdio_mux: pinctrl-mdio-mux { - fsl,pins = < - VF610_PAD_PTA18__GPIO_8 0x31c2 - VF610_PAD_PTA19__GPIO_9 0x31c2 - VF610_PAD_PTB2__GPIO_24 0x31c2 - VF610_PAD_PTB3__GPIO_25 0x31c2 - >; - }; - - pinctrl_pca9554_22: pinctrl-pca95540-22 { - fsl,pins = < - VF610_PAD_PTB28__GPIO_98 0x219d - >; - }; -}; |