summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi2
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts6
-rw-r--r--arch/arm/boot/dts/armada-38x.dtsi4
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1.dtsi4
-rw-r--r--arch/arm/boot/dts/at91-sama5d27_som1_ek.dts19
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts16
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-zero-w.dts9
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b.dts5
-rw-r--r--arch/arm/boot/dts/bcm283x.dtsi7
-rw-r--r--arch/arm/boot/dts/da850-evm.dts7
-rw-r--r--arch/arm/boot/dts/dra7xx-clocks.dtsi2
-rw-r--r--arch/arm/boot/dts/gemini.dtsi3
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi8
-rw-r--r--arch/arm/boot/dts/moxart.dtsi3
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts11
-rw-r--r--arch/arm/boot/dts/sama5d2.dtsi1
-rw-r--r--arch/arm/boot/dts/stm32429i-eval.dts5
-rw-r--r--arch/arm/boot/dts/stm32f4-pinctrl.dtsi343
-rw-r--r--arch/arm/boot/dts/stm32f429-disco.dts1
-rw-r--r--arch/arm/boot/dts/stm32f429-pinctrl.dtsi95
-rw-r--r--arch/arm/boot/dts/stm32f429.dtsi297
-rw-r--r--arch/arm/boot/dts/stm32f469-disco.dts1
-rw-r--r--arch/arm/boot/dts/stm32f469-pinctrl.dtsi96
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi16
24 files changed, 611 insertions, 350 deletions
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 7d7ca054c557..e58fab8aec5d 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -36,6 +36,8 @@
phy1 = &usb1_phy;
ethernet0 = &cpsw_emac0;
ethernet1 = &cpsw_emac1;
+ spi0 = &spi0;
+ spi1 = &spi1;
};
cpus {
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 9d276af7c539..081fa68b6f98 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -388,6 +388,7 @@
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
+ slaves = <1>;
};
&davinci_mdio {
@@ -402,11 +403,6 @@
phy-mode = "rmii";
};
-&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
- phy-mode = "rmii";
-};
-
&phy_sel {
rmii-clock-ext;
};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 7ff0811e61db..4960722aab32 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -178,7 +178,7 @@
};
i2c0: i2c@11000 {
- compatible = "marvell,mv64xxx-i2c";
+ compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
@@ -189,7 +189,7 @@
};
i2c1: i2c@11100 {
- compatible = "marvell,mv64xxx-i2c";
+ compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
reg = <0x11100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 63a5af898165..cf0087b4c9e1 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -67,8 +67,8 @@
pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
- ethernet-phy@1 {
- reg = <0x1>;
+ ethernet-phy@0 {
+ reg = <0x0>;
interrupt-parent = <&pioA>;
interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 9c9088c99cc4..60cb084a8d92 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -67,7 +67,10 @@
usb1: ohci@00400000 {
num-ports = <3>;
- atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+ atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+ &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+ 0
+ >;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
@@ -120,7 +123,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus2_uart>;
atmel,use-dma-rx;
- atmel-use-dma-tx;
+ atmel,use-dma-tx;
status = "okay";
};
@@ -178,7 +181,7 @@
uart4: serial@fc00c000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
- pinctrl-name = "default";
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus1_uart>;
status = "okay";
};
@@ -330,7 +333,7 @@
};
pinctrl_led_gpio_default: led_gpio_default {
- pinmux = <PIN_PA27__GPIO>,
+ pinmux = <PIN_PA10__GPIO>,
<PIN_PB1__GPIO>,
<PIN_PA31__GPIO>;
bias-pull-up;
@@ -396,7 +399,7 @@
};
pinctrl_usb_default: usb_default {
- pinmux = <PIN_PA10__GPIO>,
+ pinmux = <PIN_PA27__GPIO>,
<PIN_PD19__GPIO>;
bias-disable;
};
@@ -520,17 +523,17 @@
red {
label = "red";
- gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
};
green {
label = "green";
- gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
};
blue {
label = "blue";
- gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>;
+ gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index c7e9ccf2bc87..cbc26001247b 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -309,7 +309,7 @@
vddana-supply = <&vdd_3v3_lp_reg>;
vref-supply = <&vdd_3v3_lp_reg>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_adc_default>;
+ pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
status = "okay";
};
@@ -340,6 +340,20 @@
bias-disable;
};
+ /*
+ * The ADTRG pin can work on any edge type.
+ * In here it's being pulled up, so need to
+ * connect it to ground to get an edge e.g.
+ * Trigger can be configured on falling, rise
+ * or any edge, and the pull-up can be changed
+ * to pull-down or left floating according to
+ * needs.
+ */
+ pinctrl_adtrg_default: adtrg_default {
+ pinmux = <PIN_PD31__ADTRG>;
+ bias-pull-up;
+ };
+
pinctrl_charger_chglev: charger_chglev {
pinmux = <PIN_PA12__GPIO>;
bias-disable;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 82651c3eb682..b8565fc33eea 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -18,12 +18,9 @@
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
model = "Raspberry Pi Zero W";
- /* Needed by firmware to properly init UARTs */
- aliases {
- uart0 = "/soc/serial@7e201000";
- uart1 = "/soc/serial@7e215040";
- serial0 = "/soc/serial@7e201000";
- serial1 = "/soc/serial@7e215040";
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
};
leds {
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 20725ca487f3..c71a0d73d2a2 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -8,6 +8,11 @@
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
model = "Raspberry Pi 3 Model B";
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
+ };
+
memory {
reg = <0 0x40000000>;
};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 431dcfc900c0..013431e3d7c3 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -20,8 +20,13 @@
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
chosen {
- bootargs = "earlyprintk console=ttyAMA0";
+ stdout-path = "serial0:115200n8";
};
thermal-zones {
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 67e72bc72e80..c75507922f7d 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -15,6 +15,13 @@
compatible = "ti,da850-evm", "ti,da850";
model = "DA850/AM1808/OMAP-L138 EVM";
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ ethernet0 = &eth0;
+ };
+
soc@1c00000 {
pmx_core: pinmux@14120 {
status = "okay";
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index cf229dfabf61..e62b62875cba 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1817,6 +1817,8 @@
clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
ti,bit-shift = <24>;
reg = <0x1868>;
+ assigned-clocks = <&mcasp3_ahclkx_mux>;
+ assigned-clock-parents = <&abe_24m_fclk>;
};
mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 {
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index c68e8d430234..f0d178c77153 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -145,11 +145,12 @@
};
watchdog@41000000 {
- compatible = "cortina,gemini-watchdog";
+ compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
reg = <0x41000000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_WDOG>;
clocks = <&syscon GEMINI_CLK_APB>;
+ clock-names = "PCLK";
};
uart0: serial@42000000 {
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index f46814a7ea44..4d308d17f040 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -144,10 +144,10 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
<&clks IMX7D_PCIE_PHY_ROOT_CLK>;
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index 1f4c795d3f72..da7b3237bfe9 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -87,9 +87,10 @@
};
watchdog: watchdog@98500000 {
- compatible = "moxa,moxart-watchdog";
+ compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
reg = <0x98500000 0x10>;
clocks = <&clk_apb>;
+ clock-names = "PCLK";
};
sdhci: sdhci@98e00000 {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 26c20e1167b9..4acd32a1c4ef 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -144,15 +144,6 @@
io-channel-names = "temp", "bsi", "vbat";
};
- rear_camera: camera@0 {
- compatible = "linux,camera";
-
- module {
- model = "TCM8341MD";
- sensor = <&cam1>;
- };
- };
-
pwm9: dmtimer-pwm {
compatible = "ti,omap-dmtimer-pwm";
#pwm-cells = <3>;
@@ -189,10 +180,8 @@
clock-lanes = <1>;
data-lanes = <0>;
lane-polarity = <0 0>;
- clock-inv = <0>;
/* Select strobe = <1> for back camera, <0> for front camera */
strobe = <1>;
- crc = <0>;
};
};
};
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 38d2216c7ead..b1a26b42d190 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1430,6 +1430,7 @@
atmel,min-sample-rate-hz = <200000>;
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
+ atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 97b1c2321ba9..293ecb957227 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
@@ -202,10 +203,8 @@
stmpe1600: stmpe1600@42 {
compatible = "st,stmpe1600";
reg = <0x42>;
- irq-gpio = <&gpioi 8 0>;
- irq-trigger = <3>;
interrupts = <8 3>;
- interrupt-parent = <&exti>;
+ interrupt-parent = <&gpioi>;
interrupt-controller;
wakeup-source;
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
new file mode 100644
index 000000000000..7f3560c0211d
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
+
+/ {
+ soc {
+ pinctrl: pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40020000 0x3000>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&syscfg 0x8>;
+ pins-are-numbered;
+
+ gpioa: gpio@40020000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
+ st,bank-name = "GPIOA";
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x400 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
+ st,bank-name = "GPIOB";
+ };
+
+ gpioc: gpio@40020800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x800 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
+ st,bank-name = "GPIOC";
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xc00 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
+ st,bank-name = "GPIOD";
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
+ st,bank-name = "GPIOE";
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1400 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
+ st,bank-name = "GPIOF";
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1800 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
+ st,bank-name = "GPIOG";
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1c00 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
+ st,bank-name = "GPIOH";
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
+ st,bank-name = "GPIOI";
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2400 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
+ st,bank-name = "GPIOJ";
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2800 0x400>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
+ st,bank-name = "GPIOK";
+ };
+
+ usart1_pins_a: usart1@0 {
+ pins1 {
+ pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
+ bias-disable;
+ };
+ };
+
+ usart3_pins_a: usart3@0 {
+ pins1 {
+ pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
+ bias-disable;
+ };
+ };
+
+ usbotg_fs_pins_a: usbotg_fs@0 {
+ pins {
+ pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
+ <STM32F429_PA11_FUNC_OTG_FS_DM>,
+ <STM32F429_PA12_FUNC_OTG_FS_DP>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ usbotg_fs_pins_b: usbotg_fs@1 {
+ pins {
+ pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
+ <STM32F429_PB14_FUNC_OTG_HS_DM>,
+ <STM32F429_PB15_FUNC_OTG_HS_DP>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ usbotg_hs_pins_a: usbotg_hs@0 {
+ pins {
+ pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
+ <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
+ <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
+ <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
+ <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
+ <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
+ <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
+ <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
+ <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
+ <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
+ <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
+ <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ ethernet_mii: mii@0 {
+ pins {
+ pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+ <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+ <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
+ <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
+ <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
+ <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+ <STM32F429_PA2_FUNC_ETH_MDIO>,
+ <STM32F429_PC1_FUNC_ETH_MDC>,
+ <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+ <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+ <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+ <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
+ <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
+ <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
+ slew-rate = <2>;
+ };
+ };
+
+ adc3_in8_pin: adc@200 {
+ pins {
+ pinmux = <STM32F429_PF10_FUNC_ANALOG>;
+ };
+ };
+
+ pwm1_pins: pwm@1 {
+ pins {
+ pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
+ <STM32F429_PB13_FUNC_TIM1_CH1N>,
+ <STM32F429_PB12_FUNC_TIM1_BKIN>;
+ };
+ };
+
+ pwm3_pins: pwm@3 {
+ pins {
+ pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
+ <STM32F429_PB5_FUNC_TIM3_CH2>;
+ };
+ };
+
+ i2c1_pins: i2c1@0 {
+ pins {
+ pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
+ <STM32F429_PB6_FUNC_I2C1_SCL>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <3>;
+ };
+ };
+
+ ltdc_pins: ltdc@0 {
+ pins {
+ pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
+ <STM32F429_PI13_FUNC_LCD_VSYNC>,
+ <STM32F429_PI14_FUNC_LCD_CLK>,
+ <STM32F429_PI15_FUNC_LCD_R0>,
+ <STM32F429_PJ0_FUNC_LCD_R1>,
+ <STM32F429_PJ1_FUNC_LCD_R2>,
+ <STM32F429_PJ2_FUNC_LCD_R3>,
+ <STM32F429_PJ3_FUNC_LCD_R4>,
+ <STM32F429_PJ4_FUNC_LCD_R5>,
+ <STM32F429_PJ5_FUNC_LCD_R6>,
+ <STM32F429_PJ6_FUNC_LCD_R7>,
+ <STM32F429_PJ7_FUNC_LCD_G0>,
+ <STM32F429_PJ8_FUNC_LCD_G1>,
+ <STM32F429_PJ9_FUNC_LCD_G2>,
+ <STM32F429_PJ10_FUNC_LCD_G3>,
+ <STM32F429_PJ11_FUNC_LCD_G4>,
+ <STM32F429_PJ12_FUNC_LCD_B0>,
+ <STM32F429_PJ13_FUNC_LCD_B1>,
+ <STM32F429_PJ14_FUNC_LCD_B2>,
+ <STM32F429_PJ15_FUNC_LCD_B3>,
+ <STM32F429_PK0_FUNC_LCD_G5>,
+ <STM32F429_PK1_FUNC_LCD_G6>,
+ <STM32F429_PK2_FUNC_LCD_G7>,
+ <STM32F429_PK3_FUNC_LCD_B4>,
+ <STM32F429_PK4_FUNC_LCD_B5>,
+ <STM32F429_PK5_FUNC_LCD_B6>,
+ <STM32F429_PK6_FUNC_LCD_B7>,
+ <STM32F429_PK7_FUNC_LCD_DE>;
+ slew-rate = <2>;
+ };
+ };
+
+ dcmi_pins: dcmi@0 {
+ pins {
+ pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
+ <STM32F429_PB7_FUNC_DCMI_VSYNC>,
+ <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
+ <STM32F429_PC6_FUNC_DCMI_D0>,
+ <STM32F429_PC7_FUNC_DCMI_D1>,
+ <STM32F429_PC8_FUNC_DCMI_D2>,
+ <STM32F429_PC9_FUNC_DCMI_D3>,
+ <STM32F429_PC11_FUNC_DCMI_D4>,
+ <STM32F429_PD3_FUNC_DCMI_D5>,
+ <STM32F429_PB8_FUNC_DCMI_D6>,
+ <STM32F429_PE6_FUNC_DCMI_D7>,
+ <STM32F429_PC10_FUNC_DCMI_D8>,
+ <STM32F429_PC12_FUNC_DCMI_D9>,
+ <STM32F429_PD6_FUNC_DCMI_D10>,
+ <STM32F429_PD2_FUNC_DCMI_D11>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index c66d617e4245..5ceb2cf3777f 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
/ {
diff --git a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
new file mode 100644
index 000000000000..3e7a17d9112e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+ soc {
+ pinctrl: pin-controller {
+ compatible = "st,stm32f429-pinctrl";
+
+ gpioa: gpio@40020000 {
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@40020800 {
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index dd7e99b1f43b..5b36eb114ddc 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -47,7 +47,6 @@
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
-#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
#include <dt-bindings/mfd/stm32f4-rcc.h>
@@ -591,302 +590,6 @@
status = "disabled";
};
- pinctrl: pin-controller {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stm32f429-pinctrl";
- ranges = <0 0x40020000 0x3000>;
- interrupt-parent = <&exti>;
- st,syscfg = <&syscfg 0x8>;
- pins-are-numbered;
-
- gpioa: gpio@40020000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x0 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
- st,bank-name = "GPIOA";
- };
-
- gpiob: gpio@40020400 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x400 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
- st,bank-name = "GPIOB";
- };
-
- gpioc: gpio@40020800 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x800 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
- st,bank-name = "GPIOC";
- };
-
- gpiod: gpio@40020c00 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0xc00 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
- st,bank-name = "GPIOD";
- };
-
- gpioe: gpio@40021000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
- st,bank-name = "GPIOE";
- };
-
- gpiof: gpio@40021400 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1400 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
- st,bank-name = "GPIOF";
- };
-
- gpiog: gpio@40021800 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1800 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
- st,bank-name = "GPIOG";
- };
-
- gpioh: gpio@40021c00 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1c00 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
- st,bank-name = "GPIOH";
- };
-
- gpioi: gpio@40022000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
- st,bank-name = "GPIOI";
- };
-
- gpioj: gpio@40022400 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2400 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
- st,bank-name = "GPIOJ";
- };
-
- gpiok: gpio@40022800 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2800 0x400>;
- clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
- st,bank-name = "GPIOK";
- };
-
- usart1_pins_a: usart1@0 {
- pins1 {
- pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
- bias-disable;
- };
- };
-
- usart3_pins_a: usart3@0 {
- pins1 {
- pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
- bias-disable;
- };
- };
-
- usbotg_fs_pins_a: usbotg_fs@0 {
- pins {
- pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
- <STM32F429_PA11_FUNC_OTG_FS_DM>,
- <STM32F429_PA12_FUNC_OTG_FS_DP>;
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- };
-
- usbotg_fs_pins_b: usbotg_fs@1 {
- pins {
- pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
- <STM32F429_PB14_FUNC_OTG_HS_DM>,
- <STM32F429_PB15_FUNC_OTG_HS_DP>;
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- };
-
- usbotg_hs_pins_a: usbotg_hs@0 {
- pins {
- pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
- <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
- <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
- <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
- <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
- <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
- <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
- <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
- <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
- <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
- <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
- <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- };
-
- ethernet_mii: mii@0 {
- pins {
- pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
- <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
- <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
- <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
- <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
- <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
- <STM32F429_PA2_FUNC_ETH_MDIO>,
- <STM32F429_PC1_FUNC_ETH_MDC>,
- <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
- <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
- <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
- <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
- <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
- <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
- slew-rate = <2>;
- };
- };
-
- adc3_in8_pin: adc@200 {
- pins {
- pinmux = <STM32F429_PF10_FUNC_ANALOG>;
- };
- };
-
- pwm1_pins: pwm@1 {
- pins {
- pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
- <STM32F429_PB13_FUNC_TIM1_CH1N>,
- <STM32F429_PB12_FUNC_TIM1_BKIN>;
- };
- };
-
- pwm3_pins: pwm@3 {
- pins {
- pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
- <STM32F429_PB5_FUNC_TIM3_CH2>;
- };
- };
-
- i2c1_pins: i2c1@0 {
- pins {
- pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
- <STM32F429_PB6_FUNC_I2C1_SCL>;
- bias-disable;
- drive-open-drain;
- slew-rate = <3>;
- };
- };
-
- ltdc_pins: ltdc@0 {
- pins {
- pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
- <STM32F429_PI13_FUNC_LCD_VSYNC>,
- <STM32F429_PI14_FUNC_LCD_CLK>,
- <STM32F429_PI15_FUNC_LCD_R0>,
- <STM32F429_PJ0_FUNC_LCD_R1>,
- <STM32F429_PJ1_FUNC_LCD_R2>,
- <STM32F429_PJ2_FUNC_LCD_R3>,
- <STM32F429_PJ3_FUNC_LCD_R4>,
- <STM32F429_PJ4_FUNC_LCD_R5>,
- <STM32F429_PJ5_FUNC_LCD_R6>,
- <STM32F429_PJ6_FUNC_LCD_R7>,
- <STM32F429_PJ7_FUNC_LCD_G0>,
- <STM32F429_PJ8_FUNC_LCD_G1>,
- <STM32F429_PJ9_FUNC_LCD_G2>,
- <STM32F429_PJ10_FUNC_LCD_G3>,
- <STM32F429_PJ11_FUNC_LCD_G4>,
- <STM32F429_PJ12_FUNC_LCD_B0>,
- <STM32F429_PJ13_FUNC_LCD_B1>,
- <STM32F429_PJ14_FUNC_LCD_B2>,
- <STM32F429_PJ15_FUNC_LCD_B3>,
- <STM32F429_PK0_FUNC_LCD_G5>,
- <STM32F429_PK1_FUNC_LCD_G6>,
- <STM32F429_PK2_FUNC_LCD_G7>,
- <STM32F429_PK3_FUNC_LCD_B4>,
- <STM32F429_PK4_FUNC_LCD_B5>,
- <STM32F429_PK5_FUNC_LCD_B6>,
- <STM32F429_PK6_FUNC_LCD_B7>,
- <STM32F429_PK7_FUNC_LCD_DE>;
- slew-rate = <2>;
- };
- };
-
- dcmi_pins: dcmi@0 {
- pins {
- pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
- <STM32F429_PB7_FUNC_DCMI_VSYNC>,
- <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
- <STM32F429_PC6_FUNC_DCMI_D0>,
- <STM32F429_PC7_FUNC_DCMI_D1>,
- <STM32F429_PC8_FUNC_DCMI_D2>,
- <STM32F429_PC9_FUNC_DCMI_D3>,
- <STM32F429_PC11_FUNC_DCMI_D4>,
- <STM32F429_PD3_FUNC_DCMI_D5>,
- <STM32F429_PB8_FUNC_DCMI_D6>,
- <STM32F429_PE6_FUNC_DCMI_D7>,
- <STM32F429_PC10_FUNC_DCMI_D8>,
- <STM32F429_PC12_FUNC_DCMI_D9>,
- <STM32F429_PD6_FUNC_DCMI_D10>,
- <STM32F429_PD2_FUNC_DCMI_D11>;
- bias-disable;
- drive-push-pull;
- slew-rate = <3>;
- };
- };
- };
-
crc: crc@40023000 {
compatible = "st,stm32f4-crc";
reg = <0x40023000 0x400>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 6ae1f037f3f0..c18acbe4cf4e 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -47,6 +47,7 @@
/dts-v1/;
#include "stm32f429.dtsi"
+#include "stm32f469-pinctrl.dtsi"
/ {
model = "STMicroelectronics STM32F469i-DISCO board";
diff --git a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
new file mode 100644
index 000000000000..fff542662eea
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+ soc {
+ pinctrl: pin-controller {
+ compatible = "st,stm32f469-pinctrl";
+
+ gpioa: gpio@40020000 {
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@40020800 {
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-ranges = <&pinctrl 0 144 6>,
+ <&pinctrl 12 156 4>;
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-ranges = <&pinctrl 3 163 5>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index b147cb0dc14b..eef072a21acc 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -311,8 +311,8 @@
#size-cells = <0>;
reg = <0>;
- tcon1_in_drc1: endpoint@0 {
- reg = <0>;
+ tcon1_in_drc1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&drc1_out_tcon1>;
};
};
@@ -1012,8 +1012,8 @@
#size-cells = <0>;
reg = <1>;
- be1_out_drc1: endpoint@0 {
- reg = <0>;
+ be1_out_drc1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&drc1_in_be1>;
};
};
@@ -1042,8 +1042,8 @@
#size-cells = <0>;
reg = <0>;
- drc1_in_be1: endpoint@0 {
- reg = <0>;
+ drc1_in_be1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&be1_out_drc1>;
};
};
@@ -1053,8 +1053,8 @@
#size-cells = <0>;
reg = <1>;
- drc1_out_tcon1: endpoint@0 {
- reg = <0>;
+ drc1_out_tcon1: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&tcon1_in_drc1>;
};
};