diff options
Diffstat (limited to 'arch/arm/boot/dts')
50 files changed, 233 insertions, 109 deletions
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index c9629cb5ccd1..7da42a5b959c 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -263,6 +263,8 @@ compatible = "ti,am3359-tscadc"; reg = <0x0 0x1000>; interrupts = <16>; + clocks = <&adc_tsc_fck>; + clock-names = "fck"; status = "disabled"; dmas = <&edma 53 0>, <&edma 57 0>; dma-names = "fifo0", "fifo1"; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 0d2fac98ce7d..c8b80f156ec9 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -161,6 +161,8 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ #phy-cells = <0>; @@ -168,7 +170,9 @@ }; &davinci_emac { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; + status = "okay"; }; &davinci_mdio { @@ -193,6 +197,8 @@ }; &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; /* User DIP swithes [1:8] / User LEDS [1:2] */ tca6416: gpio@21 { @@ -205,6 +211,8 @@ }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; @@ -223,6 +231,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; port1-mode = "ehci-phy"; }; @@ -231,8 +241,35 @@ }; &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_rst_pins>; + + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ + OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ + OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ + OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ + OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ + OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ + OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ + OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ + OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ + OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -300,8 +337,6 @@ }; &omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_pins>; hsusb1_pins: pinmux_hsusb1_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index 8b669e2eafec..f7b680f6c48a 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -69,6 +69,8 @@ }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; s35390a: s35390a@30 { @@ -179,6 +181,13 @@ &omap3_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */ diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts index e71ccfd1df63..ff4c07c69af1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts @@ -100,12 +100,14 @@ lm25066@40 { compatible = "lm25066"; reg = <0x40>; + shunt-resistor-micro-ohms = <1000>; }; /* 12VSB PMIC */ lm25066@41 { compatible = "lm25066"; reg = <0x41>; + shunt-resistor-micro-ohms = <10000>; }; }; @@ -196,7 +198,7 @@ gpio-line-names = /* A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI", "", "", "", "", - /* B */ "DDR_MEM_TEMP", "", "", "", "", "", "", "", + /* B */ "POST_COMPLETE_N", "", "", "", "", "", "", "", /* C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "", /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON", "", "", "", "PSU_FAN_FAIL_N", diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi index e4775bbceecc..7cd4f075e325 100644 --- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi +++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi @@ -117,9 +117,9 @@ groups = "FWSPID"; }; - pinctrl_fwqspid_default: fwqspid_default { - function = "FWSPID"; - groups = "FWQSPID"; + pinctrl_fwqspi_default: fwqspi_default { + function = "FWQSPI"; + groups = "FWQSPI"; }; pinctrl_fwspiwp_default: fwspiwp_default { @@ -653,12 +653,12 @@ }; pinctrl_qspi1_default: qspi1_default { - function = "QSPI1"; + function = "SPI1"; groups = "QSPI1"; }; pinctrl_qspi2_default: qspi2_default { - function = "QSPI2"; + function = "SPI2"; groups = "QSPI2"; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 3d5ce9da42c3..9d2a0ce4ca06 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -389,6 +389,16 @@ reg = <0x1e6f2000 0x1000>; }; + video: video@1e700000 { + compatible = "aspeed,ast2600-video-engine"; + reg = <0x1e700000 0x1000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, + <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + gpio0: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi index c1c8650dafce..3542ad8a243e 100644 --- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi +++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi @@ -44,7 +44,7 @@ status = "okay"; /* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */ - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25u4035", "jedec,spi-nor"; spi-max-frequency = <33000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts index 47a00062f01f..9cf60b6f695c 100644 --- a/arch/arm/boot/dts/at91-q5xr5.dts +++ b/arch/arm/boot/dts/at91-q5xr5.dts @@ -125,7 +125,7 @@ cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts index 1e2a28c2f365..2fb51b9aca2a 100644 --- a/arch/arm/boot/dts/at91-sam9_l9260.dts +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts @@ -101,7 +101,7 @@ nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; - nand-on-flash-bbt = <1>; + nand-on-flash-bbt; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 21c86171e462..ba621783acdb 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -214,7 +214,7 @@ pinctrl-0 = <&pinctrl_qspi1_default>; status = "disabled"; - qspi1_flash: spi_flash@0 { + qspi1_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index c145c4e5ef58..5e8755f22784 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -191,7 +191,7 @@ &qspi1 { status = "okay"; - qspi1_flash: spi_flash@0 { + qspi1_flash: flash@0 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 9bf2ec0ba3e2..cdfe891f9a9e 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -137,7 +137,7 @@ pinctrl-0 = <&pinctrl_spi0_default>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; reg = <0>; spi-max-frequency = <50000000>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index d72c042f2850..a49c2966b41e 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -57,8 +57,8 @@ }; spi0: spi@f0004000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi0_cs>; cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; }; @@ -171,8 +171,8 @@ }; spi1: spi@f8008000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi1_cs>; cs-gpios = <&pioC 25 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index 710cb72bda5a..fd1086f52b40 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -49,7 +49,7 @@ cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index d241c24f0d83..e519d2747936 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -81,8 +81,8 @@ }; spi1: spi@fc018000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0_cs>; + pinctrl-names = "default", "cs"; + pinctrl-1 = <&pinctrl_spi1_cs>; cs-gpios = <&pioB 21 0>; status = "okay"; }; @@ -140,7 +140,7 @@ atmel,pins = <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; - pinctrl_spi0_cs: spi0_cs_default { + pinctrl_spi1_cs: spi1_cs_default { atmel,pins = <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index fe432b6b7e95..7017f626f362 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -65,7 +65,7 @@ spi0: spi@f8010000 { cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index 08685a10eda1..d83f76a6cd6a 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -495,7 +495,7 @@ pinctrl_flx3_default: flx3_default { pinmux = <PIN_PD16__FLEXCOM3_IO0>, <PIN_PD17__FLEXCOM3_IO1>; - bias-disable; + bias-pull-up; }; pinctrl_flx4_default: flx4_default { @@ -655,7 +655,7 @@ <PIN_PB21__QSPI0_INT>; bias-disable; slew-rate = <0>; - atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>; + atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>; }; pinctrl_sdmmc0_default: sdmmc0_default { diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index a51a3372afa1..ebeaa6ab500e 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -59,7 +59,7 @@ spi0: spi@f8010000 { cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "n25q32b", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index e1ef4e44e663..4624a6f076f8 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -73,7 +73,7 @@ spi0: spi@fffe0000 { status = "okay"; cs-gpios = <&pioA 3 0>, <0>, <0>, <0>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <15000000>; reg = <0>; @@ -94,7 +94,7 @@ status = "okay"; }; - nor_flash@10000000 { + flash@10000000 { compatible = "cfi-flash"; reg = <0x10000000 0x800000>; linux,mtd-name = "physmap-flash.0"; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index ce96345d28a3..6381088ba24f 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -92,7 +92,7 @@ spi0: spi@fffc8000 { cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@1 { + flash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index beed819609e8..8f11c0b7d76d 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -145,7 +145,7 @@ cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>; status = "okay"; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; reg = <0>; spi-max-frequency = <15000000>; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 71f60576761a..42e734020235 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -95,7 +95,7 @@ spi0: spi@fffa4000 { status = "okay"; cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 87bb39060e8b..85c17dd1c8d5 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -110,7 +110,7 @@ spi0: spi@fffc8000 { cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@1 { + flash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; @@ -214,11 +214,23 @@ 24c512@50 { compatible = "atmel,24c512"; reg = <0x50>; + vcc-supply = <®_3v3>; }; wm8731: wm8731@1b { compatible = "wm8731"; reg = <0x1b>; + + /* PCK0 at 12MHz */ + clocks = <&pmc PMC_TYPE_SYSTEM 8>; + clock-names = "mclk"; + assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>; + assigned-clock-rates = <12000000>; + + HPVDD-supply = <&vcc_dac>; + AVDD-supply = <&vcc_dac>; + DCVDD-supply = <®_3v3>; + DBVDD-supply = <®_3v3>; }; }; @@ -254,4 +266,35 @@ atmel,ssc-controller = <&ssc0>; atmel,audio-codec = <&wm8731>; }; + + reg_5v: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + vin-supply = <®_5v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_1v: fixedregulator2 { + compatible = "regulator-fixed"; + regulator-name = "1V"; + vin-supply = <®_5v>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vcc_dac: fixedregulator3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_DAC"; + vin-supply = <®_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index b6256a20fbc7..e5db198a87a8 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -167,7 +167,7 @@ spi0: spi@fffa4000{ status = "okay"; cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <13000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 2bc4e6e0a923..c905d7bfc771 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -119,7 +119,7 @@ spi0: spi@f0000000 { status = "okay"; cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 62981b39c815..d74b8d9d84aa 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -180,7 +180,7 @@ spi0: spi@fffcc000 { status = "okay"; cs-gpios = <&pioA 28 0>, <0>, <0>, <0>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <15000000>; reg = <0>; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 6d1264de6060..5f4eaa618ab4 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -125,7 +125,7 @@ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; status = "disabled"; /* conflicts with mmc1 */ - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 87c517d65f62..e9aecac4f5b5 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -278,7 +278,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 5126e2d72ed7..778796c10af8 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -177,7 +177,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - m25p80@0 { + flash@0 { compatible = "w25x32"; spi-max-frequency = <48000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 0a11bacffc1f..5733e3a4ea8e 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -4188,11 +4188,11 @@ reg = <0x1d0010 0x4>; reg-names = "sysc"; ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; + <SYSC_IDLE_NO>; ti,sysc-sidle = <SYSC_IDLE_FORCE>, <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>; + power-domains = <&prm_vpe>; clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts index 097ec35c62d8..0d58da1c0cc5 100644 --- a/arch/arm/boot/dts/imx28-ts4600.dts +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -26,7 +26,7 @@ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg &en_sd_pwr>; - broken-cd = <1>; + broken-cd; bus-width = <4>; vmmc-supply = <®_vddio_sd0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index ed2739e39085..bd763bae596b 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -286,6 +286,8 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; @@ -517,8 +519,6 @@ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; }; @@ -811,6 +811,12 @@ >; }; + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 563bf9d44fe0..0b90c3f59f89 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -154,112 +154,112 @@ regulators { bcore1 { regulator-name = "bcore1"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; bcore2 { regulator-name = "bcore2"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; bpro { regulator-name = "bpro"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; bperi { regulator-name = "bperi"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; bmem { regulator-name = "bmem"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo2 { regulator-name = "ldo2"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1800000>; }; ldo3 { regulator-name = "ldo3"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo4 { regulator-name = "ldo4"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo5 { regulator-name = "ldo5"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo6 { regulator-name = "ldo6"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo7 { regulator-name = "ldo7"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo8 { regulator-name = "ldo8"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo9 { regulator-name = "ldo9"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo10 { regulator-name = "ldo10"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; ldo11 { regulator-name = "ldo11"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <300000>; regulator-max-microvolt = <3300000>; }; bio { regulator-name = "bio"; - regulator-always-on = <1>; + regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi index 7cda6944501d..205e4d462702 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi @@ -72,8 +72,8 @@ st,settling = <2>; st,fraction-z = <7>; st,i-drive = <1>; - touchscreen-inverted-x = <1>; - touchscreen-inverted-y = <1>; + touchscreen-inverted-x; + touchscreen-inverted-y; }; }; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 7f35a06dff95..951a2a6c5a65 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -37,7 +37,7 @@ reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-gpio"; - gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_reg_sd>; regulator-always-on; diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts index 2a0a98fe67f0..3240c67e0c39 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts @@ -11,3 +11,18 @@ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts index a604d92221a4..c757f0d7781c 100644 --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts @@ -11,3 +11,18 @@ model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; }; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index b56524cc7fe2..55b619c99e24 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -265,21 +265,6 @@ }; }; -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_2_pins>; - hsusb2_2_pins: pinmux_hsusb2_2_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ - OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ - OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ - OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ - OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ - OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ - >; - }; -}; - &uart2 { interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi index b4664ab00256..d3da8b1b473b 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi @@ -118,8 +118,8 @@ gpmc,device-width = <2>; gpmc,wait-pin = <0>; gpmc,burst-length = <4>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <45>; gpmc,cs-wr-off-ns = <45>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 7e3d8147e2c1..0365f06165e9 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -31,6 +31,8 @@ aliases { display0 = &lcd; display1 = &tv0; + /delete-property/ mmc2; + /delete-property/ mmc3; }; ldo_3v3: fixedregulator { diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi index cbe42c4153a0..b4d286a6fab1 100644 --- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -76,7 +76,7 @@ pinconf { pins = "gpio20", "gpio21"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -116,7 +116,7 @@ pinconf { pins = "gpio24", "gpio25"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -141,7 +141,7 @@ pinconf { pins = "gpio8", "gpio9"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -166,7 +166,7 @@ pinconf { pins = "gpio12", "gpio13"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -229,7 +229,7 @@ pinconf { pins = "gpio16", "gpio17"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; @@ -282,7 +282,7 @@ pinconf { pins = "gpio84", "gpio85"; drive-strength = <2>; - bias-disable = <0>; + bias-disable; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 996f4458d9fc..8cb04aa8ed2f 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -972,7 +972,7 @@ snps,axi-config = <&stmmac_axi_setup>; snps,pbl = <32>; - snps,aal = <1>; + snps,aal; qcom,nss-common = <&nss_common>; qcom,qsgmii-csr = <&qsgmii_csr>; @@ -996,7 +996,7 @@ snps,axi-config = <&stmmac_axi_setup>; snps,pbl = <32>; - snps,aal = <1>; + snps,aal; qcom,nss-common = <&nss_common>; qcom,qsgmii-csr = <&qsgmii_csr>; @@ -1020,7 +1020,7 @@ snps,axi-config = <&stmmac_axi_setup>; snps,pbl = <32>; - snps,aal = <1>; + snps,aal; qcom,nss-common = <&nss_common>; qcom,qsgmii-csr = <&qsgmii_csr>; @@ -1044,7 +1044,7 @@ snps,axi-config = <&stmmac_axi_setup>; snps,pbl = <32>; - snps,aal = <1>; + snps,aal; qcom,nss-common = <&nss_common>; qcom,qsgmii-csr = <&qsgmii_csr>; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index a499de8a7a64..3652c9e24124 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -26,7 +26,7 @@ spi0: spi@f0004000 { dmas = <0>, <0>; /* Do not use DMA for spi0 */ - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi index fa9e5e2a745d..5d9e97fecf83 100644 --- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi @@ -25,7 +25,7 @@ spi0: spi@f0004000 { dmas = <0>, <0>; /* Do not use DMA for spi0 */ - m25p80@0 { + flash@0 { compatible = "atmel,at25df321a"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 4decd3a91a76..f691c8f08d04 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -601,9 +601,9 @@ #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, - <&dma0 AT91_XDMAC_DT_PERID(8)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; @@ -786,9 +786,9 @@ #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>, - <&dma0 AT91_XDMAC_DT_PERID(22)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; @@ -810,9 +810,9 @@ #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>, - <&dma0 AT91_XDMAC_DT_PERID(24)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 4cbadcb41084..ddd1cf4d0554 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -379,7 +379,7 @@ }; }; - m25p80@1 { + flash@1 { compatible = "st,m25p80"; reg = <1>; spi-max-frequency = <12000000>; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index fd194ebeedc9..3a51a41eb5e4 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -439,7 +439,7 @@ cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>, <&gpiopinctrl 85 0>; - m25p80@0 { + flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <12000000>; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index 33ae5e0590df..ac53ee3c496b 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -398,7 +398,7 @@ #size-cells = <0>; status = "okay"; - flash0: is25lp016d@0 { + flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <133000000>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index e222d2d2cb44..d142dd30e16b 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -262,7 +262,7 @@ #size-cells = <0>; status = "okay"; - flash0: mx66l51235l@0 { + flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; @@ -271,7 +271,7 @@ #size-cells = <1>; }; - flash1: mx66l51235l@1 { + flash1: flash@1 { compatible = "jedec,spi-nor"; reg = <1>; spi-rx-bus-width = <4>; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 8a0cfbfd0c45..b6cb9cdf8197 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -60,7 +60,7 @@ spi0: spi@fffa4000 { cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>; status = "okay"; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at45", "atmel,dataflash"; reg = <0>; spi-max-frequency = <15000000>; |