summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts')
-rw-r--r--arch/arm/boot/dts/imx6q-tbs2910.dts7
-rw-r--r--arch/arm/boot/dts/imx6qdl-gw52xx.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6qdl-sr-som.dtsi12
-rw-r--r--arch/arm/boot/dts/imx7d-flex-concentrator.dts1
-rw-r--r--arch/arm/boot/dts/lpc32xx.dtsi3
-rw-r--r--arch/arm/boot/dts/omap3-gta04.dtsi3
-rw-r--r--arch/arm/boot/dts/omap4-droid4-xt894.dts5
-rw-r--r--arch/arm/boot/dts/ste-db8500.dtsi38
-rw-r--r--arch/arm/boot/dts/ste-db8520.dtsi38
-rw-r--r--arch/arm/boot/dts/ste-db9500.dtsi35
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts2
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi16
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi4
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi3
-rw-r--r--arch/arm/boot/dts/sun7i-a20-bananapro.dts2
16 files changed, 156 insertions, 21 deletions
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 861e05d53157..343364d3e4f7 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -16,6 +16,13 @@
stdout-path = &uart1;
};
+ aliases {
+ mmc0 = &usdhc2;
+ mmc1 = &usdhc3;
+ mmc2 = &usdhc4;
+ /delete-property/ mmc3;
+ };
+
memory@10000000 {
device_type = "memory";
reg = <0x10000000 0x80000000>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 736074f1c3ef..959d8ac2e393 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -418,7 +418,7 @@
/* VDD_AUD_1P8: Audio codec */
reg_aud_1p8v: ldo3 {
- regulator-name = "vdd1p8";
+ regulator-name = "vdd1p8a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index d6df598bd1c2..b167b33bd108 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -137,7 +137,7 @@
lcd_backlight: lcd-backlight {
compatible = "pwm-backlight";
- pwms = <&pwm4 0 5000000>;
+ pwms = <&pwm4 0 5000000 0>;
pwm-names = "LCD_BKLT_PWM";
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
@@ -167,7 +167,7 @@
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
- status = "disabld";
+ status = "disabled";
};
i2c_cam: i2c-gpio-cam {
@@ -179,7 +179,7 @@
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
- status = "disabld";
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index b06577808ff4..7e4e5fd0143a 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -53,7 +53,6 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
- phy-handle = <&phy>;
phy-mode = "rgmii-id";
phy-reset-duration = <2>;
phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
@@ -63,10 +62,19 @@
#address-cells = <1>;
#size-cells = <0>;
- phy: ethernet-phy@0 {
+ /*
+ * The PHY can appear at either address 0 or 4 due to the
+ * configuration (LED) pin not being pulled sufficiently.
+ */
+ ethernet-phy@0 {
reg = <0>;
qca,clk-out-frequency = <125000000>;
};
+
+ ethernet-phy@4 {
+ reg = <4>;
+ qca,clk-out-frequency = <125000000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts
index 84b095279e65..bd6b5285aa8d 100644
--- a/arch/arm/boot/dts/imx7d-flex-concentrator.dts
+++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts
@@ -115,6 +115,7 @@
compatible = "nxp,pcf2127";
reg = <0>;
spi-max-frequency = <2000000>;
+ reset-source;
};
};
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 3a5cfb0ddb20..c87066d6c995 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -326,9 +326,6 @@
clocks = <&xtal_32k>, <&xtal>;
clock-names = "xtal_32k", "xtal";
-
- assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
- assigned-clock-rates = <208000000>;
};
};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index c8745bc800f7..7b8c18e6605e 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -114,7 +114,7 @@
gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
/* lcd panel */
@@ -124,7 +124,6 @@
spi-max-frequency = <100000>;
spi-cpol;
spi-cpha;
- spi-cs-high;
backlight= <&backlight>;
label = "lcd";
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 3ea4c5b9fd31..e833c21f1c01 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -16,8 +16,13 @@
debounce-interval = <10>;
};
+ /*
+ * We use pad 0x4a100116 abe_dmic_din3.gpio_122 as the irq instead
+ * of the gpio interrupt to avoid lost events in deeper idle states.
+ */
slider {
label = "Keypad Slide";
+ interrupts-extended = <&omap4_pmx_core 0xd6>;
gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
linux,input-type = <EV_SW>;
linux,code = <SW_KEYPAD_SLIDE>;
diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi
index d309fad32229..344d29853bf7 100644
--- a/arch/arm/boot/dts/ste-db8500.dtsi
+++ b/arch/arm/boot/dts/ste-db8500.dtsi
@@ -12,4 +12,42 @@
200000 0>;
};
};
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Modem trace memory */
+ ram@06000000 {
+ reg = <0x06000000 0x00f00000>;
+ no-map;
+ };
+
+ /* Modem shared memory */
+ ram@06f00000 {
+ reg = <0x06f00000 0x00100000>;
+ no-map;
+ };
+
+ /* Modem private memory */
+ ram@07000000 {
+ reg = <0x07000000 0x01000000>;
+ no-map;
+ };
+
+ /*
+ * Initial Secure Software ISSW memory
+ *
+ * This is probably only used if the kernel tries
+ * to actually call into trustzone to run secure
+ * applications, which the mainline kernel probably
+ * will not do on this old chipset. But you can never
+ * be too careful, so reserve this memory anyway.
+ */
+ ram@17f00000 {
+ reg = <0x17f00000 0x00100000>;
+ no-map;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi
index 48bd8728ae27..287804e9e183 100644
--- a/arch/arm/boot/dts/ste-db8520.dtsi
+++ b/arch/arm/boot/dts/ste-db8520.dtsi
@@ -12,4 +12,42 @@
200000 0>;
};
};
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Modem trace memory */
+ ram@06000000 {
+ reg = <0x06000000 0x00f00000>;
+ no-map;
+ };
+
+ /* Modem shared memory */
+ ram@06f00000 {
+ reg = <0x06f00000 0x00100000>;
+ no-map;
+ };
+
+ /* Modem private memory */
+ ram@07000000 {
+ reg = <0x07000000 0x01000000>;
+ no-map;
+ };
+
+ /*
+ * Initial Secure Software ISSW memory
+ *
+ * This is probably only used if the kernel tries
+ * to actually call into trustzone to run secure
+ * applications, which the mainline kernel probably
+ * will not do on this old chipset. But you can never
+ * be too careful, so reserve this memory anyway.
+ */
+ ram@17f00000 {
+ reg = <0x17f00000 0x00100000>;
+ no-map;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/ste-db9500.dtsi b/arch/arm/boot/dts/ste-db9500.dtsi
new file mode 100644
index 000000000000..0afff703191c
--- /dev/null
+++ b/arch/arm/boot/dts/ste-db9500.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+ cpus {
+ cpu@300 {
+ /* cpufreq controls */
+ operating-points = <1152000 0
+ 800000 0
+ 400000 0
+ 200000 0>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * Initial Secure Software ISSW memory
+ *
+ * This is probably only used if the kernel tries
+ * to actually call into trustzone to run secure
+ * applications, which the mainline kernel probably
+ * will not do on this old chipset. But you can never
+ * be too careful, so reserve this memory anyway.
+ */
+ ram@17f00000 {
+ reg = <0x17f00000 0x00100000>;
+ no-map;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index be90e73c923e..27d8a07718a0 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -4,7 +4,7 @@
*/
/dts-v1/;
-#include "ste-db8500.dtsi"
+#include "ste-db9500.dtsi"
#include "ste-href-ab8500.dtsi"
#include "ste-href-family-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index 62ab23824a3e..5088dd3a301b 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -33,9 +33,9 @@
* during TX anyway and that it only controls drive enable DE
* line. Hence, the RX is always enabled here.
*/
- rs485-rx-en {
+ rs485-rx-en-hog {
gpio-hog;
- gpios = <8 GPIO_ACTIVE_HIGH>;
+ gpios = <8 0>;
output-low;
line-name = "rs485-rx-en";
};
@@ -61,9 +61,9 @@
* order to reset the Hub when USB bus is powered down, but
* so far there is no such functionality.
*/
- usb-hub {
+ usb-hub-hog {
gpio-hog;
- gpios = <2 GPIO_ACTIVE_HIGH>;
+ gpios = <2 0>;
output-high;
line-name = "usb-hub-reset";
};
@@ -87,6 +87,12 @@
};
};
+&i2c4 {
+ touchscreen@49 {
+ status = "disabled";
+ };
+};
+
&i2c5 { /* TP7/TP8 */
pinctrl-names = "default";
pinctrl-0 = <&i2c5_pins_a>;
@@ -104,7 +110,7 @@
* are used for on-board microSD slot instead.
*/
/delete-property/broken-cd;
- cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ cd-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
disable-wp;
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
index 356150d28c42..32700cca24c8 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
@@ -43,9 +43,9 @@
* in order to turn on port power when USB bus is powered up, but so
* far there is no such functionality.
*/
- usb-port-power {
+ usb-port-power-hog {
gpio-hog;
- gpios = <13 GPIO_ACTIVE_LOW>;
+ gpios = <13 0>;
output-low;
line-name = "usb-port-power";
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index ac46ab363e1b..daff5318f301 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -390,7 +390,8 @@
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
- broken-cd;
+ cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ disable-wp;
st,sig-dir;
st,neg-edge;
st,use-ckin;
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 01ccff756996..5740f9442705 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -110,7 +110,7 @@
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
};
generated by cgit (git 2.34.1) at 2024-06-01 06:08:50 +0000