diff options
Diffstat (limited to 'arch/arm/boot')
31 files changed, 184 insertions, 100 deletions
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 9b3d2ba82f13..8689949bdba3 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -804,7 +804,7 @@ usb1: usb@48390000 { compatible = "synopsys,dwc3"; - reg = <0x48390000 0x17000>; + reg = <0x48390000 0x10000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb2_phy1>; phy-names = "usb2-phy"; @@ -826,7 +826,7 @@ usb2: usb@483d0000 { compatible = "synopsys,dwc3"; - reg = <0x483d0000 0x17000>; + reg = <0x483d0000 0x10000>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb2_phy2>; phy-names = "usb2-phy"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 646a6eade788..e7ac47fa6615 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -260,7 +260,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; - clock-frequency = <400000>; + clock-frequency = <100000>; tps65218: tps65218@24 { reg = <0x24>; @@ -424,7 +424,7 @@ ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { reg = <0 0 4>; /* device IO registers */ - ti,nand-ecc-opt = "bch8"; + ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; gpmc,device-width = <1>; @@ -443,8 +443,6 @@ gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; gpmc,wait-pin = <0>; - gpmc,wait-on-read; - gpmc,wait-on-write; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index ed7dd2395915..ac3e4859935f 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -435,13 +435,13 @@ }; &gpmc { - status = "okay"; + status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */ pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ nand@0,0 { reg = <0 0 0>; /* CS0, offset 0 */ - ti,nand-ecc-opt = "bch8"; + ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; gpmc,device-width = <1>; @@ -459,8 +459,7 @@ gpmc,access-ns = <30>; /* tCEA + 4*/ gpmc,rd-cycle-ns = <40>; gpmc,wr-cycle-ns = <40>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; + gpmc,wait-pin = <0>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; @@ -557,7 +556,7 @@ }; &qspi { - status = "okay"; + status = "disabled"; /* Disable GPMC (NAND) when enabling QSPI */ pinctrl-names = "default"; pinctrl-0 = <&qspi1_default>; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 65ccf564b9a5..6c97d4af61ee 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -149,7 +149,7 @@ usb: usbck { compatible = "atmel,at91rm9200-clk-usb"; #clock-cells = <0>; - atmel,clk-divisors = <1 2>; + atmel,clk-divisors = <1 2 0 0>; clocks = <&pllb>; }; diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 31f7652612fc..4e0abbd9d655 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -40,6 +40,7 @@ }; pllb: pllbck { + compatible = "atmel,at91sam9g20-clk-pllb"; atmel,clk-input-range = <2000000 32000000>; atmel,pll-clk-output-ranges = <30000000 100000000 0 0>; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 50f8022905a1..b40cdadb1f87 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "dra74x.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "TI DRA742"; @@ -24,9 +25,29 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + vtt_fixed: fixedregulator-vtt { + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + }; }; &dra7_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = <&vtt_pin>; + + vtt_pin: pinmux_vtt_pin { + pinctrl-single,pins = < + 0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ + >; + }; + i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */ @@ -43,20 +64,19 @@ i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */ - 0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + 0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ + 0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ >; }; mcspi1_pins: pinmux_mcspi1_pins { pinctrl-single,pins = < - 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */ - 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */ - 0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */ - 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ - 0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */ - 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */ - 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */ + 0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */ + 0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */ + 0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */ + 0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ + 0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ + 0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ >; }; @@ -284,7 +304,7 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; - clock-frequency = <3400000>; + clock-frequency = <400000>; }; &mcspi1 { @@ -427,22 +447,19 @@ gpmc,device-width = <2>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <40>; - gpmc,cs-wr-off-ns = <40>; + gpmc,cs-rd-off-ns = <80>; + gpmc,cs-wr-off-ns = <80>; gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <30>; - gpmc,adv-wr-off-ns = <30>; - gpmc,we-on-ns = <5>; - gpmc,we-off-ns = <25>; - gpmc,oe-on-ns = <2>; - gpmc,oe-off-ns = <20>; - gpmc,access-ns = <20>; - gpmc,wr-access-ns = <40>; - gpmc,rd-cycle-ns = <40>; - gpmc,wr-cycle-ns = <40>; - gpmc,wait-pin = <0>; - gpmc,wait-on-read; - gpmc,wait-on-write; + gpmc,adv-rd-off-ns = <60>; + gpmc,adv-wr-off-ns = <60>; + gpmc,we-on-ns = <10>; + gpmc,we-off-ns = <50>; + gpmc,oe-on-ns = <4>; + gpmc,oe-off-ns = <40>; + gpmc,access-ns = <40>; + gpmc,wr-access-ns = <80>; + gpmc,rd-cycle-ns = <80>; + gpmc,wr-cycle-ns = <80>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; @@ -483,7 +500,7 @@ reg = <0x001c0000 0x00020000>; }; partition@7 { - label = "NAND.u-boot-env"; + label = "NAND.u-boot-env.backup1"; reg = <0x001e0000 0x00020000>; }; partition@8 { @@ -504,3 +521,8 @@ &usb2_phy2 { phy-supply = <&ldousb_reg>; }; + +&gpio7 { + ti,no-reset-on-init; + ti,no-idle-on-init; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 97f603c4483d..d678152db4cb 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -245,7 +245,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -256,7 +256,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -267,7 +267,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -278,7 +278,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -289,7 +289,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -300,7 +300,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@48051000 { @@ -311,7 +311,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio8: gpio@48053000 { @@ -322,7 +322,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 6d6d23c83d30..adadaf97ac01 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -134,6 +134,8 @@ i2c@13860000 { pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; status = "okay"; usb3503: usb3503@08 { @@ -148,6 +150,10 @@ max77686: pmic@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; reg = <0x09>; #clock-cells = <1>; @@ -368,4 +374,11 @@ samsung,pins = "gpx1-3"; samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index f1bbf9a32991..82d623d05915 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -28,6 +28,12 @@ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec >; }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ + >; + }; }; }; @@ -38,6 +44,8 @@ pmic: mc34708@8 { compatible = "fsl,mc34708"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <23 0x8>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 64fa27b36be0..6b675a02066f 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -423,10 +423,14 @@ status = "disabled"; lvds-channel@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; status = "disabled"; - port { + port@0 { + reg = <0>; + lvds0_in: endpoint { remote-endpoint = <&ipu_di0_lvds0>; }; @@ -434,10 +438,14 @@ }; lvds-channel@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; status = "disabled"; - port { + port@1 { + reg = <1>; + lvds1_in: endpoint { remote-endpoint = <&ipu_di1_lvds1>; }; @@ -731,7 +739,7 @@ compatible = "fsl,imx53-vpu"; reg = <0x63ff4000 0x1000>; interrupts = <9>; - clocks = <&clks IMX5_CLK_VPU_GATE>, + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; resets = <&src 1>; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index c8e51dd41b8f..71598546087f 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -58,7 +58,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "On-board SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; @@ -181,11 +181,13 @@ }; &usbh1 { + disable-over-current; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { + disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 8c1cb53464a0..4fa254347798 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; + phy-reset-gpios = <&gpio1 25 0>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; }; @@ -339,6 +339,7 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index e8e781656b3f..6a524ca011e7 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -61,7 +61,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "Integrated SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; @@ -130,16 +130,23 @@ fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; + pinctrl_cubox_i_usbh1: cubox-i-usbh1 { + fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>; + }; + pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; }; - pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + pinctrl_cubox_i_usbotg: cubox-i-usbotg { /* - * The Cubox-i pulls this low, but as it's pointless + * The Cubox-i pulls ID low, but as it's pointless * leaving it as a pull-up, even if it is just 10uA. */ - fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; }; pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { @@ -173,13 +180,15 @@ }; &usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbh1>; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; + pinctrl-0 = <&pinctrl_cubox_i_usbotg>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index d16066608e21..db9f45b2c573 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -17,7 +17,7 @@ enet { pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 /* AR8035 reset */ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index 3e0b816dac08..bb9c6b78cb97 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -78,7 +78,7 @@ #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 @@ -96,7 +96,7 @@ #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 @@ -213,7 +213,7 @@ #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1 +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 @@ -254,7 +254,7 @@ #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 -#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3 +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 @@ -352,7 +352,7 @@ #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 -#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 @@ -404,7 +404,7 @@ #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3 +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 @@ -423,7 +423,7 @@ #define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 -#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3 +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 @@ -815,7 +815,7 @@ #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1 +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 @@ -957,7 +957,7 @@ #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 @@ -1236,7 +1236,7 @@ #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2 +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 @@ -1315,7 +1315,7 @@ #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 @@ -1409,7 +1409,7 @@ #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 -#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3 +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 @@ -1510,7 +1510,7 @@ #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi index 598afe91c676..4773d6af66a0 100644 --- a/arch/arm/boot/dts/k2e-clocks.dtsi +++ b/arch/arm/boot/dts/k2e-clocks.dtsi @@ -40,7 +40,7 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk16>; - clock-output-names = "usb"; + clock-output-names = "usb1"; reg = <0x02350004 0xb00>, <0x02350000 0x400>; reg-names = "control", "domain"; domain-id = <0>; @@ -60,8 +60,8 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; clocks = <&chipclk12>; - clock-output-names = "pcie"; - reg = <0x0235006c 0xb00>, <0x02350000 0x400>; + clock-output-names = "pcie1"; + reg = <0x0235006c 0xb00>, <0x02350048 0x400>; reg-names = "control", "domain"; domain-id = <18>; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 3c3e6da1deac..a9aae88b74f5 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -292,6 +292,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; }; &gpio1 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index b15f1a77d684..4361777a08d8 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -93,7 +93,7 @@ }; tv: connector { - compatible = "composite-connector"; + compatible = "composite-video-connector"; label = "tv"; port { @@ -353,7 +353,7 @@ }; twl_power: power { - compatible = "ti,twl4030-power-n900"; + compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 02f69f4a8fd3..9bad94efe1c8 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -107,7 +107,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <1 0 0x08000000>; - ti,nand-ecc-opt = "ham1"; + ti,nand-ecc-opt = "sw"; nand-bus-width = <8>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index e47ff69dcf70..5c375003bad1 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -467,6 +467,7 @@ ti,bit-shift = <0x1e>; reg = <0x0d00>; ti,set-bit-to-disable; + ti,set-rate-parent; }; dpll4_m6_ck: dpll4_m6_ck { diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index b8698ca68647..429471aa7a1f 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -353,13 +353,12 @@ }; ldo8_reg: ldo8 { - /* VDD_3v0: Does not go anywhere */ + /* VDD_3V_GP: act led/serial console */ regulator-name = "ldo8"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; + regulator-always-on; regulator-boot-on; - /* Unused */ - status = "disabled"; }; ldo9_reg: ldo9 { diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index e67a23b5d788..58c27466f012 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -367,10 +367,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; gpu_l3_iclk: gpu_l3_iclk { @@ -383,10 +385,12 @@ l4_root_clk_div: l4_root_clk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <8>; + reg = <0x100>; clocks = <&l3_iclk_div>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; slimbus1_slimbus_clk: slimbus1_slimbus_clk { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 23486c081a69..be59014474b2 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -275,11 +275,6 @@ renesas,function = "msiof0"; }; - i2c6_pins: i2c6 { - renesas,groups = "i2c6"; - renesas,function = "i2c6"; - }; - usb0_pins: usb0 { renesas,groups = "usb0"; renesas,function = "usb0"; @@ -420,8 +415,6 @@ }; &i2c6 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 042f821d9e4d..c9d912da6141 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -149,6 +149,8 @@ &mmc0 { /* sdmmc */ num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 171b610db709..5e4e3c238b2d 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -179,6 +179,8 @@ &mmc0 { num-slots = <1>; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; slot@0 { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 4a2000c620ad..3e97a669f15e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -116,7 +116,6 @@ msp2: msp@80117000 { pinctrl-names = "default"; pinctrl-0 = <&msp2_default_mode>; - status = "okay"; }; msp3: msp@80125000 { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 44b07e512c24..e06fbfc55bb7 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -660,6 +660,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -670,6 +672,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -680,6 +684,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c@01c2b800 { @@ -690,6 +696,8 @@ clock-frequency = <100000>; resets = <&apb2_rst 3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet@01c30000 { diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 8adaa7871dd3..a5446cba9804 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -423,7 +423,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -674,5 +674,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index bf16f8e65627..c4ed1bec4d92 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -201,7 +201,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -373,5 +373,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 2e3bd3172b23..55eb35f068fb 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -83,10 +83,6 @@ regulator-always-on; }; - clk32kg: regulator-clk32kg { - compatible = "ti,twl6030-clk32kg"; - }; - twl_usb_comparator: usb-comparator { compatible = "ti,twl6030-usb"; interrupts = <4>, <10>; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 11d733406c7e..b8a5e8c68f06 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -168,7 +168,7 @@ }; pinctrl_esdhc1: esdhc1grp { - fsl,fsl,pins = < + fsl,pins = < VF610_PAD_PTA24__ESDHC1_CLK 0x31ef VF610_PAD_PTA25__ESDHC1_CMD 0x31ef VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef |