diff options
Diffstat (limited to 'arch/arm/boot')
| -rw-r--r-- | arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi | 5 | ||||
| -rw-r--r-- | arch/arm/boot/dts/broadcom/bcm2711.dtsi | 12 | ||||
| -rw-r--r-- | arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts | 8 | ||||
| -rw-r--r-- | arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts | 8 | ||||
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 10 |
5 files changed, 19 insertions, 24 deletions
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi index 6bf4241fe3b7..c78ed064d166 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "bcm2835-rpi.dtsi" -#include <dt-bindings/power/raspberrypi-power.h> #include <dt-bindings/reset/raspberrypi,firmware-reset.h> / { @@ -101,7 +100,3 @@ &vchiq { interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; - -&xhci { - power-domains = <&power RPI_POWER_DOMAIN_USB>; -}; diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi index e4e42af21ef3..c06d9f5e53c8 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi @@ -134,7 +134,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -145,7 +145,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -156,7 +156,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -167,7 +167,7 @@ clocks = <&clocks BCM2835_CLOCK_UART>, <&clocks BCM2835_CLOCK_VPU>; clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; + arm,primecell-periphid = <0x00341011>; status = "disabled"; }; @@ -451,8 +451,6 @@ IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - /* This only applies to the ARMv7 stub */ - arm,cpu-registers-not-fw-configured; }; cpus: cpus { @@ -610,6 +608,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pm BCM2835_POWER_DOMAIN_USB>; /* DWC2 and this IP block share the same USB PHY, * enabling both at the same time results in lockups. * So keep this node disabled and let the bootloader @@ -1177,6 +1176,7 @@ }; &uart0 { + arm,primecell-periphid = <0x00341011>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts index 53cb0c58f6d0..3da2daee0c84 100644 --- a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts +++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts @@ -124,19 +124,19 @@ }; port@1 { - label = "lan1"; + label = "lan4"; }; port@2 { - label = "lan2"; + label = "lan3"; }; port@3 { - label = "lan3"; + label = "lan2"; }; port@4 { - label = "lan4"; + label = "lan1"; }; }; }; diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts index 6c666dc7ad23..01ec8c03686a 100644 --- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts +++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts @@ -126,11 +126,11 @@ ports { port@0 { - label = "lan4"; + label = "wan"; }; port@1 { - label = "lan3"; + label = "lan1"; }; port@2 { @@ -138,11 +138,11 @@ }; port@3 { - label = "lan1"; + label = "lan3"; }; port@4 { - label = "wan"; + label = "lan4"; }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index dffab5aa8b9c..88be29166c1a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -108,6 +108,11 @@ }; }; + poweroff { + compatible = "regulator-poweroff"; + cpu-supply = <&vgen2_reg>; + }; + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-always-on; @@ -236,10 +241,6 @@ status = "disabled"; }; -&clks { - fsl,pmic-stby-poweroff; -}; - /* Apalis SPI1 */ &ecspi1 { cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; @@ -527,7 +528,6 @@ pmic: pmic@8 { compatible = "fsl,pfuze100"; - fsl,pmic-stby-poweroff; reg = <0x08>; regulators { |