summaryrefslogtreecommitdiff
path: root/arch/arm/kernel/head-nommu.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/kernel/head-nommu.S')
-rw-r--r--arch/arm/kernel/head-nommu.S148
1 files changed, 118 insertions, 30 deletions
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 2e21e08de747..2e38f85b757a 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -13,6 +13,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/errno.h>
#include <asm/assembler.h>
#include <asm/ptrace.h>
@@ -110,8 +111,8 @@ ENTRY(secondary_startup)
#ifdef CONFIG_ARM_MPU
/* Use MPU region info supplied by __cpu_up */
- ldr r6, [r7] @ get secondary_data.mpu_szr
- bl __setup_mpu @ Initialize the MPU
+ ldr r6, [r7] @ get secondary_data.mpu_rgn_info
+ bl __secondary_setup_mpu @ Initialize the MPU
#endif
badr lr, 1f @ return (PIC) address
@@ -175,19 +176,33 @@ ENDPROC(__after_proc_init)
#ifdef CONFIG_ARM_MPU
+#ifndef CONFIG_CPU_V7M
/* Set which MPU region should be programmed */
-.macro set_region_nr tmp, rgnr
+.macro set_region_nr tmp, rgnr, unused
mov \tmp, \rgnr @ Use static region numbers
mcr p15, 0, \tmp, c6, c2, 0 @ Write RGNR
.endm
/* Setup a single MPU region, either D or I side (D-side for unified) */
-.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE
+.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE, unused
mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR
mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR
mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR
.endm
+#else
+.macro set_region_nr tmp, rgnr, base
+ mov \tmp, \rgnr
+ str \tmp, [\base, #MPU_RNR]
+.endm
+
+.macro setup_region bar, acr, sr, unused, base
+ lsl \acr, \acr, #16
+ orr \acr, \acr, \sr
+ str \bar, [\base, #MPU_RBAR]
+ str \acr, [\base, #MPU_RASR]
+.endm
+#endif
/*
* Setup the MPU and initial MPU Regions. We create the following regions:
* Region 0: Use this for probing the MPU details, so leave disabled.
@@ -201,64 +216,137 @@ ENDPROC(__after_proc_init)
ENTRY(__setup_mpu)
/* Probe for v7 PMSA compliance */
- mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0
+M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB)
+M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB)
+
+AR_CLASS(mrc p15, 0, r0, c0, c1, 4) @ Read ID_MMFR0
+M_CLASS(ldr r0, [r12, 0x50])
and r0, r0, #(MMFR0_PMSA) @ PMSA field
teq r0, #(MMFR0_PMSAv7) @ PMSA v7
- bne __error_p @ Fail: ARM_MPU on NOT v7 PMSA
+ bxne lr
/* Determine whether the D/I-side memory map is unified. We set the
* flags here and continue to use them for the rest of this function */
- mrc p15, 0, r0, c0, c0, 4 @ MPUIR
+AR_CLASS(mrc p15, 0, r0, c0, c0, 4) @ MPUIR
+M_CLASS(ldr r0, [r12, #MPU_TYPE])
ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU
- beq __error_p @ Fail: ARM_MPU and no MPU
+ bxeq lr
tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified
/* Setup second region first to free up r6 */
- set_region_nr r0, #MPU_RAM_REGION
+ set_region_nr r0, #MPU_RAM_REGION, r12
isb
/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET
ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
- setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled
- beq 1f @ Memory-map not unified
- setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled
+ setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled
+ beq 1f @ Memory-map not unified
+ setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled
1: isb
/* First/background region */
- set_region_nr r0, #MPU_BG_REGION
+ set_region_nr r0, #MPU_BG_REGION, r12
isb
/* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */
mov r0, #0 @ BG region starts at 0x0
ldr r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA)
mov r6, #MPU_RSR_ALL_MEM @ 4GB region, enabled
- setup_region r0, r5, r6, MPU_DATA_SIDE @ 0x0, BG region, enabled
- beq 2f @ Memory-map not unified
- setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled
+ setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ 0x0, BG region, enabled
+ beq 2f @ Memory-map not unified
+ setup_region r0, r5, r6, MPU_INSTR_SIDE r12 @ 0x0, BG region, enabled
2: isb
- /* Vectors region */
- set_region_nr r0, #MPU_VECTORS_REGION
+#ifdef CONFIG_XIP_KERNEL
+ set_region_nr r0, #MPU_ROM_REGION, r12
isb
- /* Shared, inaccessible to PL0, rw PL1 */
- mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE
- ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
- /* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
- mov r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
-
- setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled
- beq 3f @ Memory-map not unified
- setup_region r0, r5, r6, MPU_INSTR_SIDE @ VECTORS_BASE, PL0 NA, enabled
+
+ ldr r5,=(MPU_AP_PL1RO_PL0NA | MPU_RGN_NORMAL)
+
+ ldr r0, =CONFIG_XIP_PHYS_ADDR @ ROM start
+ ldr r6, =(_exiprom) @ ROM end
+ sub r6, r6, r0 @ Minimum size of region to map
+ clz r6, r6 @ Region size must be 2^N...
+ rsb r6, r6, #31 @ ...so round up region size
+ lsl r6, r6, #MPU_RSR_SZ @ Put size in right field
+ orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit
+
+ setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
+ beq 3f @ Memory-map not unified
+ setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
3: isb
+#endif
+
+ /* Enable the MPU */
+AR_CLASS(mrc p15, 0, r0, c1, c0, 0) @ Read SCTLR
+AR_CLASS(bic r0, r0, #CR_BR) @ Disable the 'default mem-map'
+AR_CLASS(orr r0, r0, #CR_M) @ Set SCTRL.M (MPU on)
+AR_CLASS(mcr p15, 0, r0, c1, c0, 0) @ Enable MPU
+
+M_CLASS(ldr r0, [r12, #MPU_CTRL])
+M_CLASS(bic r0, #MPU_CTRL_PRIVDEFENA)
+M_CLASS(orr r0, #MPU_CTRL_ENABLE)
+M_CLASS(str r0, [r12, #MPU_CTRL])
+ isb
+
+ ret lr
+ENDPROC(__setup_mpu)
+
+#ifdef CONFIG_SMP
+/*
+ * r6: pointer at mpu_rgn_info
+ */
+
+ENTRY(__secondary_setup_mpu)
+ /* Probe for v7 PMSA compliance */
+ mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0
+ and r0, r0, #(MMFR0_PMSA) @ PMSA field
+ teq r0, #(MMFR0_PMSAv7) @ PMSA v7
+ bne __error_p
+
+ /* Determine whether the D/I-side memory map is unified. We set the
+ * flags here and continue to use them for the rest of this function */
+ mrc p15, 0, r0, c0, c0, 4 @ MPUIR
+ ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU
+ beq __error_p
+
+ ldr r4, [r6, #MPU_RNG_INFO_USED]
+ mov r5, #MPU_RNG_SIZE
+ add r3, r6, #MPU_RNG_INFO_RNGS
+ mla r3, r4, r5, r3
+
+1:
+ tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified
+ sub r3, r3, #MPU_RNG_SIZE
+ sub r4, r4, #1
+
+ set_region_nr r0, r4
+ isb
+
+ ldr r0, [r3, #MPU_RGN_DRBAR]
+ ldr r6, [r3, #MPU_RGN_DRSR]
+ ldr r5, [r3, #MPU_RGN_DRACR]
+
+ setup_region r0, r5, r6, MPU_DATA_SIDE
+ beq 2f
+ setup_region r0, r5, r6, MPU_INSTR_SIDE
+2: isb
+
+ mrc p15, 0, r0, c0, c0, 4 @ Reevaluate the MPUIR
+ cmp r4, #0
+ bgt 1b
/* Enable the MPU */
mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
- bic r0, r0, #CR_BR @ Disable the 'default mem-map'
+ bic r0, r0, #CR_BR @ Disable the 'default mem-map'
orr r0, r0, #CR_M @ Set SCTRL.M (MPU on)
mcr p15, 0, r0, c1, c0, 0 @ Enable MPU
isb
+
ret lr
-ENDPROC(__setup_mpu)
-#endif
+ENDPROC(__secondary_setup_mpu)
+
+#endif /* CONFIG_SMP */
+#endif /* CONFIG_ARM_MPU */
#include "head-common.S"