summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91/board-sam9g20ek.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/board-sam9g20ek.c')
-rw-r--r--arch/arm/mach-at91/board-sam9g20ek.c13
1 files changed, 10 insertions, 3 deletions
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 64fc75c9d0ac..843d6286c6f4 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -86,6 +86,8 @@ static void __init ek_init_early(void)
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -93,7 +95,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
*/
static struct at91_udc_data __initdata ek_udc_data = {
.vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
+ .pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
@@ -123,7 +125,7 @@ static struct spi_board_info ek_spi_devices[] = {
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
@@ -163,6 +165,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.cle = 22,
.rdy_pin = AT91_PIN_PC13,
.enable_pin = AT91_PIN_PC14,
+ .det_pin = -EINVAL,
.parts = ek_nand_partition,
.num_parts = ARRAY_SIZE(ek_nand_partition),
};
@@ -195,7 +198,7 @@ static void __init ek_add_device_nand(void)
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
/* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
+ sam9_smc_configure(0, 3, &ek_nand_smc_config);
at91_add_device_nand(&ek_nand_data);
}
@@ -210,6 +213,7 @@ static struct mci_platform_data __initdata ek_mmc_data = {
.slot[1] = {
.bus_width = 4,
.detect_pin = AT91_PIN_PC9,
+ .wp_pin = -EINVAL,
},
};
@@ -218,6 +222,8 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
.slot_b = 1, /* Only one slot so use slot B */
.wire4 = 1,
.det_pin = AT91_PIN_PC9,
+ .wp_pin = -EINVAL,
+ .vcc_pin = -EINVAL,
};
#endif
@@ -227,6 +233,7 @@ static void __init ek_add_device_mmc(void)
if (ek_have_2mmc()) {
ek_mmc_data.slot[0].bus_width = 4;
ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
+ ek_mmc_data.slot[0].wp_pin = -1;
}
at91_add_device_mci(0, &ek_mmc_data);
#else