diff options
Diffstat (limited to 'arch/arm/mach-at91')
| -rw-r--r-- | arch/arm/mach-at91/Kconfig | 20 | ||||
| -rw-r--r-- | arch/arm/mach-at91/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-at91/pm.c | 431 | ||||
| -rw-r--r-- | arch/arm/mach-at91/sam_secure.c | 46 | ||||
| -rw-r--r-- | arch/arm/mach-at91/sam_secure.h | 18 | ||||
| -rw-r--r-- | arch/arm/mach-at91/sama5.c | 2 |
6 files changed, 484 insertions, 35 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b427c8abc4c6..3d7e66976206 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -166,6 +166,15 @@ config ATMEL_CLOCKSOURCE_TCB to make a single 32-bit timer. It can also be used as a clock event device supporting oneshot mode. +config MICROCHIP_CLOCKSOURCE_PIT64B + bool "64-bit Periodic Interval Timer (PIT64B) support" + default SOC_SAM9X60 || SOC_SAMA7 + select MICROCHIP_PIT64B + help + Select this to get a high resolution clockevent (SAM9X60) or + clocksource and clockevent (SAMA7G5) based on Microchip 64-bit + Periodic Interval Timer. + config HAVE_AT91_UTMI bool @@ -210,7 +219,16 @@ config SOC_SAMA5 select SRAM if PM config ATMEL_PM - bool + bool "Atmel PM support" + +config ATMEL_SECURE_PM + bool "Atmel Secure PM support" + depends on SOC_SAMA5D2 && ATMEL_PM + select ARM_PSCI + help + When running under a TEE, the suspend mode must be requested to be set + at TEE level. When enable, this option will use secure monitor calls + to set the suspend level. PSCI is then used to enter suspend. config SOC_SAMA7 bool diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 522b680b6446..0dcc37180588 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o -obj-$(CONFIG_SOC_SAMA5) += sama5.o +obj-$(CONFIG_SOC_SAMA5) += sama5.o sam_secure.o obj-$(CONFIG_SOC_SAMA7) += sama7.o obj-$(CONFIG_SOC_SAMV7) += samv7.o diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 0fd609e26615..b1a43d7bc56c 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -15,6 +15,7 @@ #include <linux/parser.h> #include <linux/suspend.h> +#include <linux/clk.h> #include <linux/clk/at91_pmc.h> #include <linux/platform_data/atmel.h> @@ -27,6 +28,7 @@ #include "generic.h" #include "pm.h" +#include "sam_secure.h" #define BACKUP_DDR_PHY_CALIBRATION (9) @@ -47,8 +49,8 @@ struct at91_pm_bu { unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION]; }; -/* - * struct at91_pm_sfrbu_offsets: registers mapping for SFRBU +/** + * struct at91_pm_sfrbu_regs - registers mapping for SFRBU * @pswbu: power switch BU control registers */ struct at91_pm_sfrbu_regs { @@ -61,13 +63,64 @@ struct at91_pm_sfrbu_regs { }; /** + * enum at91_pm_eth_clk - Ethernet clock indexes + * @AT91_PM_ETH_PCLK: pclk index + * @AT91_PM_ETH_HCLK: hclk index + * @AT91_PM_ETH_MAX_CLK: max index + */ +enum at91_pm_eth_clk { + AT91_PM_ETH_PCLK, + AT91_PM_ETH_HCLK, + AT91_PM_ETH_MAX_CLK, +}; + +/** + * enum at91_pm_eth - Ethernet controller indexes + * @AT91_PM_G_ETH: gigabit Ethernet controller index + * @AT91_PM_E_ETH: megabit Ethernet controller index + * @AT91_PM_MAX_ETH: max index + */ +enum at91_pm_eth { + AT91_PM_G_ETH, + AT91_PM_E_ETH, + AT91_PM_MAX_ETH, +}; + +/** + * struct at91_pm_quirk_eth - AT91 PM Ethernet quirks + * @dev: Ethernet device + * @np: Ethernet device node + * @clks: Ethernet clocks + * @modes: power management mode that this quirk applies to + * @dns_modes: do not suspend modes: stop suspending if Ethernet is configured + * as wakeup source but buggy and no other wakeup source is + * available + */ +struct at91_pm_quirk_eth { + struct device *dev; + struct device_node *np; + struct clk_bulk_data clks[AT91_PM_ETH_MAX_CLK]; + u32 modes; + u32 dns_modes; +}; + +/** + * struct at91_pm_quirks - AT91 PM quirks + * @eth: Ethernet quirks + */ +struct at91_pm_quirks { + struct at91_pm_quirk_eth eth[AT91_PM_MAX_ETH]; +}; + +/** * struct at91_soc_pm - AT91 SoC power management data structure * @config_shdwc_ws: wakeup sources configuration function for SHDWC * @config_pmc_ws: wakeup srouces configuration function for PMC * @ws_ids: wakup sources of_device_id array + * @bu: backup unit mapped data (for backup mode) + * @quirks: PM quirks * @data: PM data to be used on last phase of suspend * @sfrbu_regs: SFRBU registers mapping - * @bu: backup unit mapped data (for backup mode) * @memcs: memory chip select */ struct at91_soc_pm { @@ -75,19 +128,22 @@ struct at91_soc_pm { int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity); const struct of_device_id *ws_ids; struct at91_pm_bu *bu; + struct at91_pm_quirks quirks; struct at91_pm_data data; struct at91_pm_sfrbu_regs sfrbu_regs; void *memcs; }; /** - * enum at91_pm_iomaps: IOs that needs to be mapped for different PM modes + * enum at91_pm_iomaps - IOs that needs to be mapped for different PM modes * @AT91_PM_IOMAP_SHDWC: SHDWC controller * @AT91_PM_IOMAP_SFRBU: SFRBU controller + * @AT91_PM_IOMAP_ETHC: Ethernet controller */ enum at91_pm_iomaps { AT91_PM_IOMAP_SHDWC, AT91_PM_IOMAP_SFRBU, + AT91_PM_IOMAP_ETHC, }; #define AT91_PM_IOMAP(name) BIT(AT91_PM_IOMAP_##name) @@ -263,6 +319,141 @@ static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity) return 0; } +static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth) +{ + struct platform_device *pdev; + + /* Interface NA in DT. */ + if (!eth->np) + return false; + + /* No quirks for this interface and current suspend mode. */ + if (!(eth->modes & BIT(soc_pm.data.mode))) + return false; + + if (!eth->dev) { + /* Driver not probed. */ + pdev = of_find_device_by_node(eth->np); + if (!pdev) + return false; + eth->dev = &pdev->dev; + } + + /* No quirks if device isn't a wakeup source. */ + if (!device_may_wakeup(eth->dev)) { + put_device(eth->dev); + return false; + } + + /* put_device(eth->dev) is called at the end of suspend. */ + return true; +} + +static int at91_pm_config_quirks(bool suspend) +{ + struct at91_pm_quirk_eth *eth; + int i, j, ret, tmp; + + /* + * Ethernet IPs who's device_node pointers are stored into + * soc_pm.quirks.eth[].np cannot handle WoL packets while in ULP0, ULP1 + * or both due to a hardware bug. If they receive WoL packets while in + * ULP0 or ULP1 IPs could stop working or the whole system could stop + * working. We cannot handle this scenario in the ethernet driver itself + * as the driver is common to multiple vendors and also we only know + * here, in this file, if we suspend to ULP0 or ULP1 mode. Thus handle + * these scenarios here, as quirks. + */ + for (i = 0; i < AT91_PM_MAX_ETH; i++) { + eth = &soc_pm.quirks.eth[i]; + + if (!at91_pm_eth_quirk_is_valid(eth)) + continue; + + /* + * For modes in dns_modes mask the system blocks if quirk is not + * applied but if applied the interface doesn't act at WoL + * events. Thus take care to avoid suspending if this interface + * is the only configured wakeup source. + */ + if (suspend && eth->dns_modes & BIT(soc_pm.data.mode)) { + int ws_count = 0; +#ifdef CONFIG_PM_SLEEP + struct wakeup_source *ws; + + for_each_wakeup_source(ws) { + if (ws->dev == eth->dev) + continue; + + ws_count++; + break; + } +#endif + + /* + * Checking !ws is good for all platforms with issues + * even when both G_ETH and E_ETH are available as dns_modes + * is populated only on G_ETH interface. + */ + if (!ws_count) { + pr_err("AT91: PM: Ethernet cannot resume from WoL!"); + ret = -EPERM; + put_device(eth->dev); + eth->dev = NULL; + /* No need to revert clock settings for this eth. */ + i--; + goto clk_unconfigure; + } + } + + if (suspend) { + clk_bulk_disable_unprepare(AT91_PM_ETH_MAX_CLK, eth->clks); + } else { + ret = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK, + eth->clks); + if (ret) + goto clk_unconfigure; + /* + * Release the reference to eth->dev taken in + * at91_pm_eth_quirk_is_valid(). + */ + put_device(eth->dev); + eth->dev = NULL; + } + } + + return 0; + +clk_unconfigure: + /* + * In case of resume we reach this point if clk_prepare_enable() failed. + * we don't want to revert the previous clk_prepare_enable() for the + * other IP. + */ + for (j = i; j >= 0; j--) { + eth = &soc_pm.quirks.eth[j]; + if (suspend) { + if (!at91_pm_eth_quirk_is_valid(eth)) + continue; + + tmp = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK, eth->clks); + if (tmp) { + pr_err("AT91: PM: failed to enable %s clocks\n", + j == AT91_PM_G_ETH ? "geth" : "eth"); + } + } else { + /* + * Release the reference to eth->dev taken in + * at91_pm_eth_quirk_is_valid(). + */ + put_device(eth->dev); + eth->dev = NULL; + } + } + + return ret; +} + /* * Called after processes are frozen, but before we shutdown devices. */ @@ -427,6 +618,12 @@ static void at91_pm_suspend(suspend_state_t state) */ static int at91_pm_enter(suspend_state_t state) { + int ret; + + ret = at91_pm_config_quirks(true); + if (ret) + return ret; + #ifdef CONFIG_PINCTRL_AT91 /* * FIXME: this is needed to communicate between the pinctrl driver and @@ -464,6 +661,7 @@ error: #ifdef CONFIG_PINCTRL_AT91 at91_pinctrl_gpio_resume(); #endif + at91_pm_config_quirks(false); return 0; } @@ -881,6 +1079,35 @@ securam_fail: return ret; } +static void at91_pm_secure_init(void) +{ + int suspend_mode; + struct arm_smccc_res res; + + suspend_mode = soc_pm.data.suspend_mode; + + res = sam_smccc_call(SAMA5_SMC_SIP_SET_SUSPEND_MODE, + suspend_mode, 0); + if (res.a0 == 0) { + pr_info("AT91: Secure PM: suspend mode set to %s\n", + pm_modes[suspend_mode].pattern); + return; + } + + pr_warn("AT91: Secure PM: %s mode not supported !\n", + pm_modes[suspend_mode].pattern); + + res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0); + if (res.a0 == 0) { + pr_warn("AT91: Secure PM: failed to get default mode\n"); + return; + } + + pr_info("AT91: Secure PM: using default suspend mode %s\n", + pm_modes[suspend_mode].pattern); + + soc_pm.data.suspend_mode = res.a1; +} static const struct of_device_id atmel_shdwc_ids[] = { { .compatible = "atmel,sama5d2-shdwc" }, { .compatible = "microchip,sam9x60-shdwc" }, @@ -888,10 +1115,99 @@ static const struct of_device_id atmel_shdwc_ids[] = { { /* sentinel. */ } }; +static const struct of_device_id gmac_ids[] __initconst = { + { .compatible = "atmel,sama5d3-gem" }, + { .compatible = "atmel,sama5d2-gem" }, + { .compatible = "atmel,sama5d29-gem" }, + { .compatible = "microchip,sama7g5-gem" }, + { }, +}; + +static const struct of_device_id emac_ids[] __initconst = { + { .compatible = "atmel,sama5d3-macb" }, + { .compatible = "microchip,sama7g5-emac" }, + { }, +}; + +/* + * Replaces _mode_to_replace with a supported mode that doesn't depend + * on controller pointed by _map_bitmask + * @_maps: u32 array containing AT91_PM_IOMAP() flags and indexed by AT91 + * PM mode + * @_map_bitmask: AT91_PM_IOMAP() bitmask; if _mode_to_replace depends on + * controller represented by _map_bitmask, _mode_to_replace needs to be + * updated + * @_mode_to_replace: standby_mode or suspend_mode that need to be + * updated + * @_mode_to_check: standby_mode or suspend_mode; this is needed here + * to avoid having standby_mode and suspend_mode set with the same AT91 + * PM mode + */ +#define AT91_PM_REPLACE_MODE(_maps, _map_bitmask, _mode_to_replace, \ + _mode_to_check) \ + do { \ + if (((_maps)[(_mode_to_replace)]) & (_map_bitmask)) { \ + int _mode_to_use, _mode_complementary; \ + /* Use ULP0 if it doesn't need _map_bitmask. */ \ + if (!((_maps)[AT91_PM_ULP0] & (_map_bitmask))) {\ + _mode_to_use = AT91_PM_ULP0; \ + _mode_complementary = AT91_PM_STANDBY; \ + } else { \ + _mode_to_use = AT91_PM_STANDBY; \ + _mode_complementary = AT91_PM_STANDBY; \ + } \ + \ + if ((_mode_to_check) != _mode_to_use) \ + (_mode_to_replace) = _mode_to_use; \ + else \ + (_mode_to_replace) = _mode_complementary;\ + } \ + } while (0) + +/* + * Replaces standby and suspend modes with default supported modes: + * ULP0 and STANDBY. + * @_maps: u32 array indexed by AT91 PM mode containing AT91_PM_IOMAP() + * flags + * @_map: controller specific name; standby and suspend mode need to be + * replaced in order to not depend on this controller + */ +#define AT91_PM_REPLACE_MODES(_maps, _map) \ + do { \ + AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\ + (soc_pm.data.standby_mode), \ + (soc_pm.data.suspend_mode)); \ + AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\ + (soc_pm.data.suspend_mode), \ + (soc_pm.data.standby_mode)); \ + } while (0) + +static int __init at91_pm_get_eth_clks(struct device_node *np, + struct clk_bulk_data *clks) +{ + clks[AT91_PM_ETH_PCLK].clk = of_clk_get_by_name(np, "pclk"); + if (IS_ERR(clks[AT91_PM_ETH_PCLK].clk)) + return PTR_ERR(clks[AT91_PM_ETH_PCLK].clk); + + clks[AT91_PM_ETH_HCLK].clk = of_clk_get_by_name(np, "hclk"); + if (IS_ERR(clks[AT91_PM_ETH_HCLK].clk)) + return PTR_ERR(clks[AT91_PM_ETH_HCLK].clk); + + return 0; +} + +static int __init at91_pm_eth_clks_empty(struct clk_bulk_data *clks) +{ + return IS_ERR(clks[AT91_PM_ETH_PCLK].clk) || + IS_ERR(clks[AT91_PM_ETH_HCLK].clk); +} + static void __init at91_pm_modes_init(const u32 *maps, int len) { + struct at91_pm_quirk_eth *gmac = &soc_pm.quirks.eth[AT91_PM_G_ETH]; + struct at91_pm_quirk_eth *emac = &soc_pm.quirks.eth[AT91_PM_E_ETH]; struct device_node *np; - int ret, mode; + int ret; ret = at91_pm_backup_init(); if (ret) { @@ -906,17 +1222,7 @@ static void __init at91_pm_modes_init(const u32 *maps, int len) np = of_find_matching_node(NULL, atmel_shdwc_ids); if (!np) { pr_warn("%s: failed to find shdwc!\n", __func__); - - /* Use ULP0 if it doesn't needs SHDWC.*/ - if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC))) - mode = AT91_PM_ULP0; - else - mode = AT91_PM_STANDBY; - - if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC)) - soc_pm.data.standby_mode = mode; - if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC)) - soc_pm.data.suspend_mode = mode; + AT91_PM_REPLACE_MODES(maps, SHDWC); } else { soc_pm.data.shdwc = of_iomap(np, 0); of_node_put(np); @@ -928,27 +1234,48 @@ static void __init at91_pm_modes_init(const u32 *maps, int len) np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu"); if (!np) { pr_warn("%s: failed to find sfrbu!\n", __func__); - - /* - * Use ULP0 if it doesn't need SHDWC or if SHDWC - * was already located. - */ - if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)) || - soc_pm.data.shdwc) - mode = AT91_PM_ULP0; - else - mode = AT91_PM_STANDBY; - - if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU)) - soc_pm.data.standby_mode = mode; - if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU)) - soc_pm.data.suspend_mode = mode; + AT91_PM_REPLACE_MODES(maps, SFRBU); } else { soc_pm.data.sfrbu = of_iomap(np, 0); of_node_put(np); } } + if ((at91_is_pm_mode_active(AT91_PM_ULP1) || + at91_is_pm_mode_active(AT91_PM_ULP0) || + at91_is_pm_mode_active(AT91_PM_ULP0_FAST)) && + (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(ETHC) || + maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(ETHC))) { + np = of_find_matching_node(NULL, gmac_ids); + if (!np) { + np = of_find_matching_node(NULL, emac_ids); + if (np) + goto get_emac_clks; + AT91_PM_REPLACE_MODES(maps, ETHC); + goto unmap_unused_nodes; + } else { + gmac->np = np; + at91_pm_get_eth_clks(np, gmac->clks); + } + + np = of_find_matching_node(NULL, emac_ids); + if (!np) { + if (at91_pm_eth_clks_empty(gmac->clks)) + AT91_PM_REPLACE_MODES(maps, ETHC); + } else { +get_emac_clks: + emac->np = np; + ret = at91_pm_get_eth_clks(np, emac->clks); + if (ret && at91_pm_eth_clks_empty(gmac->clks)) { + of_node_put(gmac->np); + of_node_put(emac->np); + gmac->np = NULL; + emac->np = NULL; + } + } + } + +unmap_unused_nodes: /* Unmap all unnecessary. */ if (soc_pm.data.shdwc && !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) || @@ -1184,17 +1511,30 @@ void __init sama5_pm_init(void) static const int modes[] __initconst = { AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, }; + static const u32 iomaps[] __initconst = { + [AT91_PM_ULP0] = AT91_PM_IOMAP(ETHC), + [AT91_PM_ULP0_FAST] = AT91_PM_IOMAP(ETHC), + }; int ret; if (!IS_ENABLED(CONFIG_SOC_SAMA5)) return; at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); + at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); ret = at91_dt_ramc(false); if (ret) return; at91_pm_init(NULL); + + /* Quirks applies to ULP0, ULP0 fast and ULP1 modes. */ + soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) | + BIT(AT91_PM_ULP0_FAST) | + BIT(AT91_PM_ULP1); + /* Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup source. */ + soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) | + BIT(AT91_PM_ULP0_FAST); } void __init sama5d2_pm_init(void) @@ -1204,7 +1544,10 @@ void __init sama5d2_pm_init(void) AT91_PM_BACKUP, }; static const u32 iomaps[] __initconst = { - [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC), + [AT91_PM_ULP0] = AT91_PM_IOMAP(ETHC), + [AT91_PM_ULP0_FAST] = AT91_PM_IOMAP(ETHC), + [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC) | + AT91_PM_IOMAP(ETHC), [AT91_PM_BACKUP] = AT91_PM_IOMAP(SHDWC) | AT91_PM_IOMAP(SFRBU), }; @@ -1213,6 +1556,12 @@ void __init sama5d2_pm_init(void) if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) return; + if (IS_ENABLED(CONFIG_ATMEL_SECURE_PM)) { + pr_warn("AT91: Secure PM: ignoring standby mode\n"); + at91_pm_secure_init(); + return; + } + at91_pm_modes_validate(modes, ARRAY_SIZE(modes)); at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps)); ret = at91_dt_ramc(false); @@ -1229,6 +1578,17 @@ void __init sama5d2_pm_init(void) soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0); soc_pm.sfrbu_regs.pswbu.softsw = BIT(1); soc_pm.sfrbu_regs.pswbu.state = BIT(3); + + /* Quirk applies to ULP0, ULP0 fast and ULP1 modes. */ + soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) | + BIT(AT91_PM_ULP0_FAST) | + BIT(AT91_PM_ULP1); + /* + * Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup + * source. + */ + soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) | + BIT(AT91_PM_ULP0_FAST); } void __init sama7_pm_init(void) @@ -1239,7 +1599,8 @@ void __init sama7_pm_init(void) static const u32 iomaps[] __initconst = { [AT91_PM_ULP0] = AT91_PM_IOMAP(SFRBU), [AT91_PM_ULP1] = AT91_PM_IOMAP(SFRBU) | - AT91_PM_IOMAP(SHDWC), + AT91_PM_IOMAP(SHDWC) | + AT91_PM_IOMAP(ETHC), [AT91_PM_BACKUP] = AT91_PM_IOMAP(SFRBU) | AT91_PM_IOMAP(SHDWC), }; @@ -1264,6 +1625,10 @@ void __init sama7_pm_init(void) soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0); soc_pm.sfrbu_regs.pswbu.softsw = BIT(1); soc_pm.sfrbu_regs.pswbu.state = BIT(2); + + /* Quirks applies to ULP1 for both Ethernet interfaces. */ + soc_pm.quirks.eth[AT91_PM_E_ETH].modes = BIT(AT91_PM_ULP1); + soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP1); } static int __init at91_pm_modes_select(char *str) diff --git a/arch/arm/mach-at91/sam_secure.c b/arch/arm/mach-at91/sam_secure.c new file mode 100644 index 000000000000..2a01f7a7d13f --- /dev/null +++ b/arch/arm/mach-at91/sam_secure.c @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2022, Microchip + */ + +#include <linux/arm-smccc.h> +#include <linux/of.h> + +#include "sam_secure.h" + +static bool optee_available; + +#define SAM_SIP_SMC_STD_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_32, \ + ARM_SMCCC_OWNER_SIP, (func_num)) + +struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1) +{ + struct arm_smccc_res res = {.a0 = -1}; + + if (WARN_ON(!optee_available)) + return res; + + arm_smccc_smc(SAM_SIP_SMC_STD_CALL_VAL(fn), arg0, arg1, 0, 0, 0, 0, 0, + &res); + + return res; +} + +void __init sam_secure_init(void) +{ + struct device_node *np; + + /* + * We only check that the OP-TEE node is present and available. The + * OP-TEE kernel driver is not needed for the type of interaction made + * with OP-TEE here so the driver's status is not checked. + */ + np = of_find_node_by_path("/firmware/optee"); + if (np && of_device_is_available(np)) + optee_available = true; + of_node_put(np); + + if (optee_available) + pr_info("Running under OP-TEE firmware\n"); +} diff --git a/arch/arm/mach-at91/sam_secure.h b/arch/arm/mach-at91/sam_secure.h new file mode 100644 index 000000000000..1e7d8b20ba1e --- /dev/null +++ b/arch/arm/mach-at91/sam_secure.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2022, Microchip + */ + +#ifndef SAM_SECURE_H +#define SAM_SECURE_H + +#include <linux/arm-smccc.h> + +/* Secure Monitor mode APIs */ +#define SAMA5_SMC_SIP_SET_SUSPEND_MODE 0x400 +#define SAMA5_SMC_SIP_GET_SUSPEND_MODE 0x401 + +void __init sam_secure_init(void); +struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1); + +#endif /* SAM_SECURE_H */ diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 89dab7cf01e8..de5dd28b392e 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -14,6 +14,7 @@ #include <asm/system_misc.h> #include "generic.h" +#include "sam_secure.h" static void __init sama5_dt_device_init(void) { @@ -47,6 +48,7 @@ MACHINE_END static void __init sama5d2_init(void) { of_platform_default_populate(NULL, NULL, NULL); + sam_secure_init(); sama5d2_pm_init(); } |