summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/mach-mx31lite.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-imx/mach-mx31lite.c')
-rw-r--r--arch/arm/mach-imx/mach-mx31lite.c290
1 files changed, 0 insertions, 290 deletions
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
deleted file mode 100644
index aaccf52f7ac1..000000000000
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ /dev/null
@@ -1,290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/moduleparam.h>
-#include <linux/smsc911x.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#include "board-mx31lite.h"
-#include "common.h"
-#include "devices-imx31.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx3.h"
-#include "ulpi.h"
-
-/*
- * This file contains the module-specific initialization routines.
- */
-
-static unsigned int mx31lite_pins[] = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
- /* SPI 0 */
- MX31_PIN_CSPI1_SCLK__SCLK,
- MX31_PIN_CSPI1_MOSI__MOSI,
- MX31_PIN_CSPI1_MISO__MISO,
- MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI1_SS0__SS0,
- MX31_PIN_CSPI1_SS1__SS1,
- MX31_PIN_CSPI1_SS2__SS2,
- /* LAN9117 IRQ pin */
- IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
- /* SPI 1 */
- MX31_PIN_CSPI2_SCLK__SCLK,
- MX31_PIN_CSPI2_MOSI__MOSI,
- MX31_PIN_CSPI2_MISO__MISO,
- MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
- MX31_PIN_CSPI2_SS0__SS0,
- MX31_PIN_CSPI2_SS1__SS1,
- MX31_PIN_CSPI2_SS2__SS2,
-};
-
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-mx31lite_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT,
-};
-
-static struct resource smsc911x_resources[] = {
- {
- .start = MX31_CS4_BASE_ADDR,
- .end = MX31_CS4_BASE_ADDR + 0x100,
- .flags = IORESOURCE_MEM,
- }, {
- /* irq number is run-time assigned */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smsc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smsc911x_resources),
- .resource = smsc911x_resources,
- .dev = {
- .platform_data = &smsc911x_config,
- },
-};
-
-static struct mc13xxx_platform_data mc13783_pdata __initdata = {
- .flags = MC13XXX_USE_RTC,
-};
-
-static struct spi_board_info mc13783_spi_dev __initdata = {
- .modalias = "mc13783",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- .platform_data = &mc13783_pdata,
- /* irq number is run-time assigned */
-};
-
-/*
- * USB
- */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
- PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh2_init(struct platform_device *pdev)
-{
- int pins[] = {
- MX31_PIN_USBH2_DATA0__USBH2_DATA0,
- MX31_PIN_USBH2_DATA1__USBH2_DATA1,
- MX31_PIN_USBH2_CLK__USBH2_CLK,
- MX31_PIN_USBH2_DIR__USBH2_DIR,
- MX31_PIN_USBH2_NXT__USBH2_NXT,
- MX31_PIN_USBH2_STP__USBH2_STP,
- };
-
- mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
- mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
- mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
- mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
- /* chip select */
- mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
- "USBH2_CS");
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
- mdelay(10);
-
- return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
- .init = usbh2_init,
- .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/*
- * NOR flash
- */
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
-};
-
-static struct resource nor_flash_resource = {
- .start = 0xa0000000,
- .end = 0xa1ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .resource = &nor_flash_resource,
- .num_resources = 1,
-};
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31lite_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
- .length = MX31_CS4_SIZE,
- .type = MT_DEVICE
- }
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init mx31lite_map_io(void)
-{
- mx31_map_io();
- iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
-}
-
-static int mx31lite_baseboard;
-core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
-
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-static void __init mx31lite_init(void)
-{
- imx31_soc_init();
-
- mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
- "mx31lite");
-
- imx31_add_imx_uart0(&uart_pdata);
- imx31_add_spi_imx0(NULL);
-
- /* NOR and NAND flash */
- platform_device_register(&physmap_flash_device);
- imx31_add_mxc_nand(&mx31lite_nand_board_info);
-
- imx31_add_spi_imx1(NULL);
-
- regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-}
-
-static void __init mx31lite_late(void)
-{
- int ret;
-
- if (mx31lite_baseboard == MX31LITE_DB)
- mx31lite_db_init();
-
- mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
- spi_register_board_info(&mc13783_spi_dev, 1);
-
- /* USB */
- usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
- ULPI_OTG_DRVVBUS_EXT);
- if (usbh2_pdata.otg)
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
- /* SMSC9117 IRQ pin */
- ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
- if (ret)
- pr_warn("could not get LAN irq gpio\n");
- else {
- gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
- smsc911x_resources[1].start =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
- smsc911x_resources[1].end =
- gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6));
- platform_device_register(&smsc911x_device);
- }
-}
-
-static void __init mx31lite_timer_init(void)
-{
- mx31_clocks_init(26000000);
-}
-
-MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx31lite_map_io,
- .init_early = imx31_init_early,
- .init_irq = mx31_init_irq,
- .init_time = mx31lite_timer_init,
- .init_machine = mx31lite_init,
- .init_late = mx31lite_late,
- .restart = mxc_restart,
-MACHINE_END