summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/mach-vpr200.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-imx/mach-vpr200.c')
-rw-r--r--arch/arm/mach-imx/mach-vpr200.c306
1 files changed, 0 insertions, 306 deletions
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
deleted file mode 100644
index fae5a41b5f6c..000000000000
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ /dev/null
@@ -1,306 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- * Copyright 2010 Creative Product Design
- *
- * Derived from mx35 3stack.
- * Original author: Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <linux/i2c.h>
-#include <linux/mfd/mc13xxx.h>
-
-#include "common.h"
-#include "devices-imx35.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx35.h"
-
-#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
-#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
-
-#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4)
-#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5)
-#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7)
-#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8)
-#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9)
-#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10)
-#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11)
-#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12)
-
-static const struct fb_videomode fb_modedb[] = {
- {
- /* 800x480 @ 60 Hz */
- .name = "PT0708048",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = KHZ2PICOS(33260),
- .left_margin = 50,
- .right_margin = 156,
- .upper_margin = 10,
- .lower_margin = 10,
- .hsync_len = 1, /* note: DE only display */
- .vsync_len = 1, /* note: DE only display */
- .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }, {
- /* 800x480 @ 60 Hz */
- .name = "CTP-CLAA070LC0ACW",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = KHZ2PICOS(27000),
- .left_margin = 50,
- .right_margin = 50, /* whole line should have 900 clocks */
- .upper_margin = 10,
- .lower_margin = 10, /* whole frame should have 500 lines */
- .hsync_len = 1, /* note: DE only display */
- .vsync_len = 1, /* note: DE only display */
- .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
- .vmode = FB_VMODE_NONINTERLACED,
- .flag = 0,
- }
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
- .name = "PT0708048",
- .mode = fb_modedb,
- .num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data vpr200_flash_data = {
- .width = 2,
-};
-
-static struct resource vpr200_flash_resource = {
- .start = MX35_CS0_BASE_ADDR,
- .end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device vpr200_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &vpr200_flash_data,
- },
- .resource = &vpr200_flash_resource,
- .num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data
- vpr200_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-#define VPR_KEY_DEBOUNCE 500
-static struct gpio_keys_button vpr200_gpio_keys_table[] = {
- {KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
- {KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
- {KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
- {KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
- {KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
- {KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
- {KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
- {KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
-};
-
-static const struct gpio_keys_platform_data
- vpr200_gpio_keys_data __initconst = {
- .buttons = vpr200_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
-};
-
-static struct mc13xxx_platform_data vpr200_pmic = {
- .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
- .bitrate = 50000,
-};
-
-static struct i2c_board_info vpr200_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c02", 0x50), /* E0=0, E1=0, E2=0 */
- }, {
- I2C_BOARD_INFO("mc13892", 0x08),
- .platform_data = &vpr200_pmic,
- /* irq number is run-time assigned */
- }
-};
-
-static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
- /* UART1 */
- MX35_PAD_TXD1__UART1_TXD_MUX,
- MX35_PAD_RXD1__UART1_RXD_MUX,
- /* UART3 */
- MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
- MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
- /* FEC */
- MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
- MX35_PAD_FEC_RX_DV__FEC_RX_DV,
- MX35_PAD_FEC_COL__FEC_COL,
- MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
- MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
- MX35_PAD_FEC_TX_EN__FEC_TX_EN,
- MX35_PAD_FEC_MDC__FEC_MDC,
- MX35_PAD_FEC_MDIO__FEC_MDIO,
- MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
- MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
- MX35_PAD_FEC_CRS__FEC_CRS,
- MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
- MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
- MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
- MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
- MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
- MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
- /* Display */
- MX35_PAD_LD0__IPU_DISPB_DAT_0,
- MX35_PAD_LD1__IPU_DISPB_DAT_1,
- MX35_PAD_LD2__IPU_DISPB_DAT_2,
- MX35_PAD_LD3__IPU_DISPB_DAT_3,
- MX35_PAD_LD4__IPU_DISPB_DAT_4,
- MX35_PAD_LD5__IPU_DISPB_DAT_5,
- MX35_PAD_LD6__IPU_DISPB_DAT_6,
- MX35_PAD_LD7__IPU_DISPB_DAT_7,
- MX35_PAD_LD8__IPU_DISPB_DAT_8,
- MX35_PAD_LD9__IPU_DISPB_DAT_9,
- MX35_PAD_LD10__IPU_DISPB_DAT_10,
- MX35_PAD_LD11__IPU_DISPB_DAT_11,
- MX35_PAD_LD12__IPU_DISPB_DAT_12,
- MX35_PAD_LD13__IPU_DISPB_DAT_13,
- MX35_PAD_LD14__IPU_DISPB_DAT_14,
- MX35_PAD_LD15__IPU_DISPB_DAT_15,
- MX35_PAD_LD16__IPU_DISPB_DAT_16,
- MX35_PAD_LD17__IPU_DISPB_DAT_17,
- MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
- MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
- MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
- /* LCD Enable */
- MX35_PAD_D3_VSYNC__GPIO1_2,
- /* USBOTG */
- MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
- MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
- /* SDCARD */
- MX35_PAD_SD1_CMD__ESDHC1_CMD,
- MX35_PAD_SD1_CLK__ESDHC1_CLK,
- MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
- /* PMIC */
- MX35_PAD_GPIO2_0__GPIO2_0,
- /* GPIO keys */
- MX35_PAD_SCKR__GPIO1_4,
- MX35_PAD_COMPARE__GPIO1_5,
- MX35_PAD_SCKT__GPIO1_7,
- MX35_PAD_FST__GPIO1_8,
- MX35_PAD_HCKT__GPIO1_9,
- MX35_PAD_TX5_RX0__GPIO1_10,
- MX35_PAD_TX4_RX1__GPIO1_11,
- MX35_PAD_TX3_RX2__GPIO1_12,
-};
-
-/* USB Device config */
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
- .workaround = FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static int vpr200_usbh_init(struct platform_device *pdev)
-{
- return mx35_initialize_usb_hw(pdev->id,
- MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
- .init = vpr200_usbh_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static struct platform_device *devices[] __initdata = {
- &vpr200_flash,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init vpr200_board_init(void)
-{
- imx35_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
-
- imx35_add_fec(NULL);
- imx35_add_imx2_wdt();
-
- imx35_add_imx_uart0(NULL);
- imx35_add_imx_uart2(NULL);
-
- imx35_add_ipu_core();
- imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
- imx35_add_fsl_usb2_udc(&otg_device_pdata);
- imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
- imx35_add_mxc_nand(&vpr200_nand_board_info);
- imx35_add_sdhci_esdhc_imx(0, NULL);
-}
-
-static void __init vpr200_late_init(void)
-{
- imx_add_gpio_keys(&vpr200_gpio_keys_data);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
- printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
- else
- gpio_direction_output(GPIO_LCDPWR, 0);
-
- if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
- printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
- else
- gpio_direction_input(GPIO_PMIC_INT);
-
- vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
- i2c_register_board_info(0, vpr200_i2c_devices,
- ARRAY_SIZE(vpr200_i2c_devices));
-
- imx35_add_imx_i2c0(&vpr200_i2c0_data);
-}
-
-static void __init vpr200_timer_init(void)
-{
- mx35_clocks_init();
-}
-
-MACHINE_START(VPR200, "VPR200")
- /* Maintainer: Creative Product Design */
- .map_io = mx35_map_io,
- .init_early = imx35_init_early,
- .init_irq = mx35_init_irq,
- .init_time = vpr200_timer_init,
- .init_machine = vpr200_board_init,
- .init_late = vpr200_late_init,
- .restart = mxc_restart,
-MACHINE_END