summaryrefslogtreecommitdiff
path: root/arch/arm/mach-integrator/pci_v3.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-integrator/pci_v3.c')
-rw-r--r--arch/arm/mach-integrator/pci_v3.c900
1 files changed, 0 insertions, 900 deletions
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
deleted file mode 100644
index 2565f0e7b5cf..000000000000
--- a/arch/arm/mach-integrator/pci_v3.c
+++ /dev/null
@@ -1,900 +0,0 @@
-/*
- * linux/arch/arm/mach-integrator/pci_v3.c
- *
- * PCI functions for V3 host PCI bridge
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_pci.h>
-#include <video/vga.h>
-
-#include <asm/mach/map.h>
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include <asm/irq_regs.h>
-
-#include "pci_v3.h"
-#include "hardware.h"
-
-/*
- * Where in the memory map does PCI live?
- *
- * This represents a fairly liberal usage of address space. Even though
- * the V3 only has two windows (therefore we need to map stuff on the fly),
- * we maintain the same addresses, even if they're not mapped.
- */
-#define PHYS_PCI_MEM_BASE 0x40000000 /* 256M */
-#define PHYS_PCI_PRE_BASE 0x50000000 /* 256M */
-#define PHYS_PCI_IO_BASE 0x60000000 /* 16M */
-#define PHYS_PCI_CONFIG_BASE 0x61000000 /* 16M */
-#define PHYS_PCI_V3_BASE 0x62000000 /* 64K */
-
-#define PCI_MEMORY_VADDR IOMEM(0xe8000000)
-#define PCI_CONFIG_VADDR IOMEM(0xec000000)
-
-/*
- * V3 Local Bus to PCI Bridge definitions
- *
- * Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
- * All V3 register names are prefaced by V3_ to avoid clashing with any other
- * PCI definitions. Their names match the user's manual.
- *
- * I'm assuming that I20 is disabled.
- *
- */
-#define V3_PCI_VENDOR 0x00000000
-#define V3_PCI_DEVICE 0x00000002
-#define V3_PCI_CMD 0x00000004
-#define V3_PCI_STAT 0x00000006
-#define V3_PCI_CC_REV 0x00000008
-#define V3_PCI_HDR_CFG 0x0000000C
-#define V3_PCI_IO_BASE 0x00000010
-#define V3_PCI_BASE0 0x00000014
-#define V3_PCI_BASE1 0x00000018
-#define V3_PCI_SUB_VENDOR 0x0000002C
-#define V3_PCI_SUB_ID 0x0000002E
-#define V3_PCI_ROM 0x00000030
-#define V3_PCI_BPARAM 0x0000003C
-#define V3_PCI_MAP0 0x00000040
-#define V3_PCI_MAP1 0x00000044
-#define V3_PCI_INT_STAT 0x00000048
-#define V3_PCI_INT_CFG 0x0000004C
-#define V3_LB_BASE0 0x00000054
-#define V3_LB_BASE1 0x00000058
-#define V3_LB_MAP0 0x0000005E
-#define V3_LB_MAP1 0x00000062
-#define V3_LB_BASE2 0x00000064
-#define V3_LB_MAP2 0x00000066
-#define V3_LB_SIZE 0x00000068
-#define V3_LB_IO_BASE 0x0000006E
-#define V3_FIFO_CFG 0x00000070
-#define V3_FIFO_PRIORITY 0x00000072
-#define V3_FIFO_STAT 0x00000074
-#define V3_LB_ISTAT 0x00000076
-#define V3_LB_IMASK 0x00000077
-#define V3_SYSTEM 0x00000078
-#define V3_LB_CFG 0x0000007A
-#define V3_PCI_CFG 0x0000007C
-#define V3_DMA_PCI_ADR0 0x00000080
-#define V3_DMA_PCI_ADR1 0x00000090
-#define V3_DMA_LOCAL_ADR0 0x00000084
-#define V3_DMA_LOCAL_ADR1 0x00000094
-#define V3_DMA_LENGTH0 0x00000088
-#define V3_DMA_LENGTH1 0x00000098
-#define V3_DMA_CSR0 0x0000008B
-#define V3_DMA_CSR1 0x0000009B
-#define V3_DMA_CTLB_ADR0 0x0000008C
-#define V3_DMA_CTLB_ADR1 0x0000009C
-#define V3_DMA_DELAY 0x000000E0
-#define V3_MAIL_DATA 0x000000C0
-#define V3_PCI_MAIL_IEWR 0x000000D0
-#define V3_PCI_MAIL_IERD 0x000000D2
-#define V3_LB_MAIL_IEWR 0x000000D4
-#define V3_LB_MAIL_IERD 0x000000D6
-#define V3_MAIL_WR_STAT 0x000000D8
-#define V3_MAIL_RD_STAT 0x000000DA
-#define V3_QBA_MAP 0x000000DC
-
-/* PCI COMMAND REGISTER bits
- */
-#define V3_COMMAND_M_FBB_EN (1 << 9)
-#define V3_COMMAND_M_SERR_EN (1 << 8)
-#define V3_COMMAND_M_PAR_EN (1 << 6)
-#define V3_COMMAND_M_MASTER_EN (1 << 2)
-#define V3_COMMAND_M_MEM_EN (1 << 1)
-#define V3_COMMAND_M_IO_EN (1 << 0)
-
-/* SYSTEM REGISTER bits
- */
-#define V3_SYSTEM_M_RST_OUT (1 << 15)
-#define V3_SYSTEM_M_LOCK (1 << 14)
-
-/* PCI_CFG bits
- */
-#define V3_PCI_CFG_M_I2O_EN (1 << 15)
-#define V3_PCI_CFG_M_IO_REG_DIS (1 << 14)
-#define V3_PCI_CFG_M_IO_DIS (1 << 13)
-#define V3_PCI_CFG_M_EN3V (1 << 12)
-#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
-#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
-#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
-
-/* PCI_BASE register bits (PCI -> Local Bus)
- */
-#define V3_PCI_BASE_M_ADR_BASE 0xFFF00000
-#define V3_PCI_BASE_M_ADR_BASEL 0x000FFF00
-#define V3_PCI_BASE_M_PREFETCH (1 << 3)
-#define V3_PCI_BASE_M_TYPE (3 << 1)
-#define V3_PCI_BASE_M_IO (1 << 0)
-
-/* PCI MAP register bits (PCI -> Local bus)
- */
-#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
-#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
-#define V3_PCI_MAP_M_ROM_SIZE (3 << 10)
-#define V3_PCI_MAP_M_SWAP (3 << 8)
-#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
-#define V3_PCI_MAP_M_REG_EN (1 << 1)
-#define V3_PCI_MAP_M_ENABLE (1 << 0)
-
-/*
- * LB_BASE0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_BASE_ADR_BASE 0xfff00000
-#define V3_LB_BASE_SWAP (3 << 8)
-#define V3_LB_BASE_ADR_SIZE (15 << 4)
-#define V3_LB_BASE_PREFETCH (1 << 3)
-#define V3_LB_BASE_ENABLE (1 << 0)
-
-#define V3_LB_BASE_ADR_SIZE_1MB (0 << 4)
-#define V3_LB_BASE_ADR_SIZE_2MB (1 << 4)
-#define V3_LB_BASE_ADR_SIZE_4MB (2 << 4)
-#define V3_LB_BASE_ADR_SIZE_8MB (3 << 4)
-#define V3_LB_BASE_ADR_SIZE_16MB (4 << 4)
-#define V3_LB_BASE_ADR_SIZE_32MB (5 << 4)
-#define V3_LB_BASE_ADR_SIZE_64MB (6 << 4)
-#define V3_LB_BASE_ADR_SIZE_128MB (7 << 4)
-#define V3_LB_BASE_ADR_SIZE_256MB (8 << 4)
-#define V3_LB_BASE_ADR_SIZE_512MB (9 << 4)
-#define V3_LB_BASE_ADR_SIZE_1GB (10 << 4)
-#define V3_LB_BASE_ADR_SIZE_2GB (11 << 4)
-
-#define v3_addr_to_lb_base(a) ((a) & V3_LB_BASE_ADR_BASE)
-
-/*
- * LB_MAP0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_MAP_MAP_ADR 0xfff0
-#define V3_LB_MAP_TYPE (7 << 1)
-#define V3_LB_MAP_AD_LOW_EN (1 << 0)
-
-#define V3_LB_MAP_TYPE_IACK (0 << 1)
-#define V3_LB_MAP_TYPE_IO (1 << 1)
-#define V3_LB_MAP_TYPE_MEM (3 << 1)
-#define V3_LB_MAP_TYPE_CONFIG (5 << 1)
-#define V3_LB_MAP_TYPE_MEM_MULTIPLE (6 << 1)
-
-#define v3_addr_to_lb_map(a) (((a) >> 16) & V3_LB_MAP_MAP_ADR)
-
-/*
- * LB_BASE2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_BASE2_ADR_BASE 0xff00
-#define V3_LB_BASE2_SWAP (3 << 6)
-#define V3_LB_BASE2_ENABLE (1 << 0)
-
-#define v3_addr_to_lb_base2(a) (((a) >> 16) & V3_LB_BASE2_ADR_BASE)
-
-/*
- * LB_MAP2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_MAP2_MAP_ADR 0xff00
-
-#define v3_addr_to_lb_map2(a) (((a) >> 16) & V3_LB_MAP2_MAP_ADR)
-
-/*
- * The V3 PCI interface chip in Integrator provides several windows from
- * local bus memory into the PCI memory areas. Unfortunately, there
- * are not really enough windows for our usage, therefore we reuse
- * one of the windows for access to PCI configuration space. The
- * memory map is as follows:
- *
- * Local Bus Memory Usage
- *
- * 40000000 - 4FFFFFFF PCI memory. 256M non-prefetchable
- * 50000000 - 5FFFFFFF PCI memory. 256M prefetchable
- * 60000000 - 60FFFFFF PCI IO. 16M
- * 61000000 - 61FFFFFF PCI Configuration. 16M
- *
- * There are three V3 windows, each described by a pair of V3 registers.
- * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
- * Base0 and Base1 can be used for any type of PCI memory access. Base2
- * can be used either for PCI I/O or for I20 accesses. By default, uHAL
- * uses this only for PCI IO space.
- *
- * Normally these spaces are mapped using the following base registers:
- *
- * Usage Local Bus Memory Base/Map registers used
- *
- * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
- * Mem 50000000 - 5FFFFFFF LB_BASE1/LB_MAP1
- * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
- * Cfg 61000000 - 61FFFFFF
- *
- * This means that I20 and PCI configuration space accesses will fail.
- * When PCI configuration accesses are needed (via the uHAL PCI
- * configuration space primitives) we must remap the spaces as follows:
- *
- * Usage Local Bus Memory Base/Map registers used
- *
- * Mem 40000000 - 4FFFFFFF LB_BASE0/LB_MAP0
- * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0
- * IO 60000000 - 60FFFFFF LB_BASE2/LB_MAP2
- * Cfg 61000000 - 61FFFFFF LB_BASE1/LB_MAP1
- *
- * To make this work, the code depends on overlapping windows working.
- * The V3 chip translates an address by checking its range within
- * each of the BASE/MAP pairs in turn (in ascending register number
- * order). It will use the first matching pair. So, for example,
- * if the same address is mapped by both LB_BASE0/LB_MAP0 and
- * LB_BASE1/LB_MAP1, the V3 will use the translation from
- * LB_BASE0/LB_MAP0.
- *
- * To allow PCI Configuration space access, the code enlarges the
- * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M. This occludes
- * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
- * be remapped for use by configuration cycles.
- *
- * At the end of the PCI Configuration space accesses,
- * LB_BASE1/LB_MAP1 is reset to map PCI Memory. Finally the window
- * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
- * reveal the now restored LB_BASE1/LB_MAP1 window.
- *
- * NOTE: We do not set up I2O mapping. I suspect that this is only
- * for an intelligent (target) device. Using I2O disables most of
- * the mappings into PCI memory.
- */
-
-/* Filled in by probe */
-static void __iomem *pci_v3_base;
-/* CPU side memory ranges */
-static struct resource conf_mem; /* FIXME: remap this instead of static map */
-static struct resource io_mem;
-static struct resource non_mem;
-static struct resource pre_mem;
-/* PCI side memory ranges */
-static u64 non_mem_pci;
-static u64 non_mem_pci_sz;
-static u64 pre_mem_pci;
-static u64 pre_mem_pci_sz;
-
-// V3 access routines
-#define v3_writeb(o,v) __raw_writeb(v, pci_v3_base + (unsigned int)(o))
-#define v3_readb(o) (__raw_readb(pci_v3_base + (unsigned int)(o)))
-
-#define v3_writew(o,v) __raw_writew(v, pci_v3_base + (unsigned int)(o))
-#define v3_readw(o) (__raw_readw(pci_v3_base + (unsigned int)(o)))
-
-#define v3_writel(o,v) __raw_writel(v, pci_v3_base + (unsigned int)(o))
-#define v3_readl(o) (__raw_readl(pci_v3_base + (unsigned int)(o)))
-
-/*============================================================================
- *
- * routine: uHALir_PCIMakeConfigAddress()
- *
- * parameters: bus = which bus
- * device = which device
- * function = which function
- * offset = configuration space register we are interested in
- *
- * description: this routine will generate a platform dependent config
- * address.
- *
- * calls: none
- *
- * returns: configuration address to play on the PCI bus
- *
- * To generate the appropriate PCI configuration cycles in the PCI
- * configuration address space, you present the V3 with the following pattern
- * (which is very nearly a type 1 (except that the lower two bits are 00 and
- * not 01). In order for this mapping to work you need to set up one of
- * the local to PCI aperatures to 16Mbytes in length translating to
- * PCI configuration space starting at 0x0000.0000.
- *
- * PCI configuration cycles look like this:
- *
- * Type 0:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:11 Device select bit.
- * 10:8 Function number
- * 7:2 Register number
- *
- * Type 1:
- *
- * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
- * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * 31:24 reserved
- * 23:16 bus number (8 bits = 128 possible buses)
- * 15:11 Device number (5 bits)
- * 10:8 function number
- * 7:2 register number
- *
- */
-
-#undef V3_LB_BASE_PREFETCH
-#define V3_LB_BASE_PREFETCH 0
-
-static void __iomem *v3_open_config_window(struct pci_bus *bus,
- unsigned int devfn, int offset)
-{
- unsigned int address, mapaddress, busnr;
-
- busnr = bus->number;
-
- /*
- * Trap out illegal values
- */
- BUG_ON(offset > 255);
- BUG_ON(busnr > 255);
- BUG_ON(devfn > 255);
-
- if (busnr == 0) {
- int slot = PCI_SLOT(devfn);
-
- /*
- * local bus segment so need a type 0 config cycle
- *
- * build the PCI configuration "address" with one-hot in
- * A31-A11
- *
- * mapaddress:
- * 3:1 = config cycle (101)
- * 0 = PCI A1 & A0 are 0 (0)
- */
- address = PCI_FUNC(devfn) << 8;
- mapaddress = V3_LB_MAP_TYPE_CONFIG;
-
- if (slot > 12)
- /*
- * high order bits are handled by the MAP register
- */
- mapaddress |= 1 << (slot - 5);
- else
- /*
- * low order bits handled directly in the address
- */
- address |= 1 << (slot + 11);
- } else {
- /*
- * not the local bus segment so need a type 1 config cycle
- *
- * address:
- * 23:16 = bus number
- * 15:11 = slot number (7:3 of devfn)
- * 10:8 = func number (2:0 of devfn)
- *
- * mapaddress:
- * 3:1 = config cycle (101)
- * 0 = PCI A1 & A0 from host bus (1)
- */
- mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
- address = (busnr << 16) | (devfn << 8);
- }
-
- /*
- * Set up base0 to see all 512Mbytes of memory space (not
- * prefetchable), this frees up base1 for re-use by
- * configuration memory
- */
- v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
- V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE);
-
- /*
- * Set up base1/map1 to point into configuration space.
- */
- v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(conf_mem.start) |
- V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE);
- v3_writew(V3_LB_MAP1, mapaddress);
-
- return PCI_CONFIG_VADDR + address + offset;
-}
-
-static void v3_close_config_window(void)
-{
- /*
- * Reassign base1 for use by prefetchable PCI memory
- */
- v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) |
- V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
- V3_LB_BASE_ENABLE);
- v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(pre_mem_pci) |
- V3_LB_MAP_TYPE_MEM_MULTIPLE);
-
- /*
- * And shrink base0 back to a 256M window (NOTE: MAP0 already correct)
- */
- v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
- V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
-}
-
-static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *val)
-{
- int ret = pci_generic_config_read(bus, devfn, where, size, val);
- v3_close_config_window();
- return ret;
-}
-
-static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
-{
- int ret = pci_generic_config_write(bus, devfn, where, size, val);
- v3_close_config_window();
- return ret;
-}
-
-static struct pci_ops pci_v3_ops = {
- .map_bus = v3_open_config_window,
- .read = v3_read_config,
- .write = v3_write_config,
-};
-
-static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
-{
- if (request_resource(&iomem_resource, &non_mem)) {
- printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
- "memory region\n");
- return -EBUSY;
- }
- if (request_resource(&iomem_resource, &pre_mem)) {
- release_resource(&non_mem);
- printk(KERN_ERR "PCI: unable to allocate prefetchable "
- "memory region\n");
- return -EBUSY;
- }
-
- /*
- * the mem resource for this bus
- * the prefetch mem resource for this bus
- */
- pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
- pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
-
- return 1;
-}
-
-/*
- * These don't seem to be implemented on the Integrator I have, which
- * means I can't get additional information on the reason for the pm2fb
- * problems. I suppose I'll just have to mind-meld with the machine. ;)
- */
-static void __iomem *ap_syscon_base;
-#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
-#define INTEGRATOR_SC_LBFADDR_OFFSET 0x20
-#define INTEGRATOR_SC_LBFCODE_OFFSET 0x24
-
-static int
-v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- unsigned long pc = instruction_pointer(regs);
- unsigned long instr = *(unsigned long *)pc;
-#if 0
- char buf[128];
-
- sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n",
- addr, fsr, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
- v3_readb(V3_LB_ISTAT));
- printk(KERN_DEBUG "%s", buf);
-#endif
-
- v3_writeb(V3_LB_ISTAT, 0);
- __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
-
- /*
- * If the instruction being executed was a read,
- * make it look like it read all-ones.
- */
- if ((instr & 0x0c100000) == 0x04100000) {
- int reg = (instr >> 12) & 15;
- unsigned long val;
-
- if (instr & 0x00400000)
- val = 255;
- else
- val = -1;
-
- regs->uregs[reg] = val;
- regs->ARM_pc += 4;
- return 0;
- }
-
- if ((instr & 0x0e100090) == 0x00100090) {
- int reg = (instr >> 12) & 15;
-
- regs->uregs[reg] = -1;
- regs->ARM_pc += 4;
- return 0;
- }
-
- return 1;
-}
-
-static irqreturn_t v3_irq(int irq, void *devid)
-{
-#ifdef CONFIG_DEBUG_LL
- struct pt_regs *regs = get_irq_regs();
- unsigned long pc = instruction_pointer(regs);
- unsigned long instr = *(unsigned long *)pc;
- char buf[128];
- extern void printascii(const char *);
-
- sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
- "ISTAT=%02x\n", irq, pc, instr,
- __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET),
- __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
- v3_readb(V3_LB_ISTAT));
- printascii(buf);
-#endif
-
- v3_writew(V3_PCI_STAT, 0xf000);
- v3_writeb(V3_LB_ISTAT, 0);
- __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
-
-#ifdef CONFIG_DEBUG_LL
- /*
- * If the instruction being executed was a read,
- * make it look like it read all-ones.
- */
- if ((instr & 0x0c100000) == 0x04100000) {
- int reg = (instr >> 16) & 15;
- sprintf(buf, " reg%d = %08lx\n", reg, regs->uregs[reg]);
- printascii(buf);
- }
-#endif
- return IRQ_HANDLED;
-}
-
-static int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
-{
- int ret = 0;
-
- if (!ap_syscon_base)
- return -EINVAL;
-
- if (nr == 0) {
- sys->mem_offset = non_mem.start;
- ret = pci_v3_setup_resources(sys);
- }
-
- return ret;
-}
-
-/*
- * V3_LB_BASE? - local bus address
- * V3_LB_MAP? - pci bus address
- */
-static void __init pci_v3_preinit(void)
-{
- unsigned int temp;
- phys_addr_t io_address = pci_pio_to_address(io_mem.start);
-
- pcibios_min_mem = 0x00100000;
-
- /*
- * Hook in our fault handler for PCI errors
- */
- hook_fault_code(4, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
- hook_fault_code(6, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
- hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
- hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
-
- /*
- * Unlock V3 registers, but only if they were previously locked.
- */
- if (v3_readw(V3_SYSTEM) & V3_SYSTEM_M_LOCK)
- v3_writew(V3_SYSTEM, 0xa05f);
-
- /*
- * Setup window 0 - PCI non-prefetchable memory
- * Local: 0x40000000 Bus: 0x00000000 Size: 256MB
- */
- v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(non_mem.start) |
- V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
- v3_writew(V3_LB_MAP0, v3_addr_to_lb_map(non_mem_pci) |
- V3_LB_MAP_TYPE_MEM);
-
- /*
- * Setup window 1 - PCI prefetchable memory
- * Local: 0x50000000 Bus: 0x10000000 Size: 256MB
- */
- v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(pre_mem.start) |
- V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
- V3_LB_BASE_ENABLE);
- v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(pre_mem_pci) |
- V3_LB_MAP_TYPE_MEM_MULTIPLE);
-
- /*
- * Setup window 2 - PCI IO
- */
- v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) |
- V3_LB_BASE_ENABLE);
- v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
-
- /*
- * Disable PCI to host IO cycles
- */
- temp = v3_readw(V3_PCI_CFG) & ~V3_PCI_CFG_M_I2O_EN;
- temp |= V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS;
- v3_writew(V3_PCI_CFG, temp);
-
- printk(KERN_DEBUG "FIFO_CFG: %04x FIFO_PRIO: %04x\n",
- v3_readw(V3_FIFO_CFG), v3_readw(V3_FIFO_PRIORITY));
-
- /*
- * Set the V3 FIFO such that writes have higher priority than
- * reads, and local bus write causes local bus read fifo flush.
- * Same for PCI.
- */
- v3_writew(V3_FIFO_PRIORITY, 0x0a0a);
-
- /*
- * Re-lock the system register.
- */
- temp = v3_readw(V3_SYSTEM) | V3_SYSTEM_M_LOCK;
- v3_writew(V3_SYSTEM, temp);
-
- /*
- * Clear any error conditions, and enable write errors.
- */
- v3_writeb(V3_LB_ISTAT, 0);
- v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10));
- v3_writeb(V3_LB_IMASK, 0x28);
- __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET);
-}
-
-static void __init pci_v3_postinit(void)
-{
- unsigned int pci_cmd;
- phys_addr_t io_address = pci_pio_to_address(io_mem.start);
-
- pci_cmd = PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
-
- v3_writew(V3_PCI_CMD, pci_cmd);
-
- v3_writeb(V3_LB_ISTAT, ~0x40);
- v3_writeb(V3_LB_IMASK, 0x68);
-
-#if 0
- ret = request_irq(IRQ_AP_LBUSTIMEOUT, lb_timeout, 0, "bus timeout", NULL);
- if (ret)
- printk(KERN_ERR "PCI: unable to grab local bus timeout "
- "interrupt: %d\n", ret);
-#endif
-
- register_isa_ports(non_mem.start, io_address, 0);
-}
-
-/*
- * A small note about bridges and interrupts. The DECchip 21050 (and
- * later) adheres to the PCI-PCI bridge specification. This says that
- * the interrupts on the other side of a bridge are swizzled in the
- * following manner:
- *
- * Dev Interrupt Interrupt
- * Pin on Pin on
- * Device Connector
- *
- * 4 A A
- * B B
- * C C
- * D D
- *
- * 5 A B
- * B C
- * C D
- * D A
- *
- * 6 A C
- * B D
- * C A
- * D B
- *
- * 7 A D
- * B A
- * C B
- * D C
- *
- * Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
- * Thus, each swizzle is ((pin-1) + (device#-4)) % 4
- */
-
-/*
- * This routine handles multiple bridges.
- */
-static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp)
-{
- if (*pinp == 0)
- *pinp = 1;
-
- return pci_common_swizzle(dev, pinp);
-}
-
-static struct hw_pci pci_v3 __initdata = {
- .swizzle = pci_v3_swizzle,
- .setup = pci_v3_setup,
- .nr_controllers = 1,
- .ops = &pci_v3_ops,
- .preinit = pci_v3_preinit,
- .postinit = pci_v3_postinit,
-};
-
-static int __init pci_v3_probe(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
- struct of_pci_range_parser parser;
- struct of_pci_range range;
- struct resource *res;
- int irq, ret;
-
- /* Remap the Integrator system controller */
- ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100);
- if (!ap_syscon_base) {
- dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
- return -ENODEV;
- }
-
- /* Device tree probe path */
- if (!np) {
- dev_err(&pdev->dev, "no device tree node for PCIv3\n");
- return -ENODEV;
- }
-
- if (of_pci_range_parser_init(&parser, np))
- return -EINVAL;
-
- /* Get base for bridge registers */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "unable to obtain PCIv3 base\n");
- return -ENODEV;
- }
- pci_v3_base = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
- if (!pci_v3_base) {
- dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
- return -ENODEV;
- }
-
- /* Get and request error IRQ resource */
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(&pdev->dev, "unable to obtain PCIv3 error IRQ\n");
- return -ENODEV;
- }
- ret = devm_request_irq(&pdev->dev, irq, v3_irq, 0,
- "PCIv3 error", NULL);
- if (ret < 0) {
- dev_err(&pdev->dev, "unable to request PCIv3 error IRQ %d (%d)\n", irq, ret);
- return ret;
- }
-
- for_each_of_pci_range(&parser, &range) {
- if (!range.flags) {
- ret = of_pci_range_to_resource(&range, np, &conf_mem);
- conf_mem.name = "PCIv3 config";
- }
- if (range.flags & IORESOURCE_IO) {
- ret = of_pci_range_to_resource(&range, np, &io_mem);
- io_mem.name = "PCIv3 I/O";
- }
- if ((range.flags & IORESOURCE_MEM) &&
- !(range.flags & IORESOURCE_PREFETCH)) {
- non_mem_pci = range.pci_addr;
- non_mem_pci_sz = range.size;
- ret = of_pci_range_to_resource(&range, np, &non_mem);
- non_mem.name = "PCIv3 non-prefetched mem";
- }
- if ((range.flags & IORESOURCE_MEM) &&
- (range.flags & IORESOURCE_PREFETCH)) {
- pre_mem_pci = range.pci_addr;
- pre_mem_pci_sz = range.size;
- ret = of_pci_range_to_resource(&range, np, &pre_mem);
- pre_mem.name = "PCIv3 prefetched mem";
- }
-
- if (ret < 0) {
- dev_err(&pdev->dev, "missing ranges in device node\n");
- return ret;
- }
- }
-
- pci_v3.map_irq = of_irq_parse_and_map_pci;
- pci_common_init_dev(&pdev->dev, &pci_v3);
-
- return 0;
-}
-
-static const struct of_device_id pci_ids[] = {
- { .compatible = "v3,v360epc-pci", },
- {},
-};
-
-static struct platform_driver pci_v3_driver = {
- .driver = {
- .name = "pci-v3",
- .of_match_table = pci_ids,
- },
-};
-
-static int __init pci_v3_init(void)
-{
- return platform_driver_probe(&pci_v3_driver, pci_v3_probe);
-}
-
-subsys_initcall(pci_v3_init);
-
-/*
- * Static mappings for the PCIv3 bridge
- *
- * e8000000 40000000 PCI memory PHYS_PCI_MEM_BASE (max 512M)
- * ec000000 61000000 PCI config space PHYS_PCI_CONFIG_BASE (max 16M)
- * fee00000 60000000 PCI IO PHYS_PCI_IO_BASE (max 16M)
- */
-static struct map_desc pci_v3_io_desc[] __initdata __maybe_unused = {
- {
- .virtual = (unsigned long)PCI_MEMORY_VADDR,
- .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE),
- .length = SZ_16M,
- .type = MT_DEVICE
- }, {
- .virtual = (unsigned long)PCI_CONFIG_VADDR,
- .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
- .length = SZ_16M,
- .type = MT_DEVICE
- }
-};
-
-int __init pci_v3_early_init(void)
-{
- iotable_init(pci_v3_io_desc, ARRAY_SIZE(pci_v3_io_desc));
- vga_base = (unsigned long)PCI_MEMORY_VADDR;
- pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE));
- return 0;
-}