diff options
Diffstat (limited to 'arch/arm/mach-ixp4xx/Kconfig')
| -rw-r--r-- | arch/arm/mach-ixp4xx/Kconfig | 248 |
1 files changed, 13 insertions, 235 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index f7211b57b1e7..cb46802f5ce5 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -1,241 +1,19 @@ # SPDX-License-Identifier: GPL-2.0-only -if ARCH_IXP4XX - -menu "Intel IXP4xx Implementation Options" - -comment "IXP4xx Platforms" - -config MACH_IXP4XX_OF - bool - prompt "Devce Tree IXP4xx boards" - default y +menuconfig ARCH_IXP4XX + bool "IXP4xx-based platforms" + depends on ARCH_MULTI_V5 + depends on CPU_BIG_ENDIAN select ARM_APPENDED_DTB # Old Redboot bootloaders deployed + select CPU_XSCALE + select GPIO_IXP4XX + select GPIOLIB + select FORCE_PCI select I2C select I2C_IOP3XX - select PCI - select TIMER_OF + select IXP4XX_IRQ + select IXP4XX_TIMER + select USB_EHCI_BIG_ENDIAN_DESC + select USB_EHCI_BIG_ENDIAN_MMIO select USE_OF help - Say 'Y' here to support Device Tree-based IXP4xx platforms. - -config MACH_NSLU2 - bool - prompt "Linksys NSLU2" - select FORCE_PCI - help - Say 'Y' here if you want your kernel to support Linksys's - NSLU2 NAS device. For more information on this platform, - see http://www.nslu2-linux.org - -config MACH_AVILA - bool "Avila" - select FORCE_PCI - help - Say 'Y' here if you want your kernel to support the Gateworks - Avila Network Platform. For more information on this platform, - see <file:Documentation/arm/ixp4xx.rst>. - -config MACH_LOFT - bool "Loft" - depends on MACH_AVILA - help - Say 'Y' here if you want your kernel to support the Giant - Shoulder Inc Loft board (a minor variation on the standard - Gateworks Avila Network Platform). - -config ARCH_ADI_COYOTE - bool "Coyote" - select FORCE_PCI - help - Say 'Y' here if you want your kernel to support the ADI - Engineering Coyote Gateway Reference Platform. For more - information on this platform, see <file:Documentation/arm/ixp4xx.rst>. - -config MACH_GATEWAY7001 - bool "Gateway 7001" - select FORCE_PCI - help - Say 'Y' here if you want your kernel to support Gateway's - 7001 Access Point. For more information on this platform, - see http://openwrt.org - -config MACH_WG302V2 - bool "Netgear WG302 v2 / WAG302 v2" - select FORCE_PCI - help - Say 'Y' here if you want your kernel to support Netgear's - WG302 v2 or WAG302 v2 Access Points. For more information - on this platform, see http://openwrt.org - -config ARCH_IXDP425 - bool "IXDP425" - help - Say 'Y' here if you want your kernel to support Intel's - IXDP425 Development Platform (Also known as Richfield). - For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>. - -config MACH_IXDPG425 - bool "IXDPG425" - help - Say 'Y' here if you want your kernel to support Intel's - IXDPG425 Development Platform (Also known as Montajade). - For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>. - -config MACH_IXDP465 - bool "IXDP465" - help - Say 'Y' here if you want your kernel to support Intel's - IXDP465 Development Platform (Also known as BMP). - For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>. - -config MACH_GORAMO_MLR - bool "GORAMO Multi Link Router" - help - Say 'Y' here if you want your kernel to support GORAMO - MultiLink router. - -config MACH_KIXRP435 - bool "KIXRP435" - help - Say 'Y' here if you want your kernel to support Intel's - KIXRP435 Reference Platform. - For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>. - -# -# IXCDP1100 is the exact same HW as IXDP425, but with a different machine -# number from the bootloader due to marketing monkeys, so we just enable it -# by default if IXDP425 is enabled. -# -config ARCH_IXCDP1100 - bool - depends on ARCH_IXDP425 - default y - -config ARCH_PRPMC1100 - bool "PrPMC1100" - help - Say 'Y' here if you want your kernel to support the Motorola - PrPCM1100 Processor Mezanine Module. For more information on - this platform, see <file:Documentation/arm/ixp4xx.rst>. - -config MACH_NAS100D - bool - prompt "NAS100D" - select FORCE_PCI - help - Say 'Y' here if you want your kernel to support Iomega's - NAS 100d device. For more information on this platform, - see http://www.nslu2-linux.org/wiki/NAS100d/HomePage - -config MACH_DSMG600 - bool - prompt "D-Link DSM-G600 RevA" - select FORCE_PCI - help - Say 'Y' here if you want your kernel to support D-Link's - DSM-G600 RevA device. For more information on this platform, - see http://www.nslu2-linux.org/wiki/DSMG600/HomePage - -config ARCH_IXDP4XX - bool - depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 - default y - -config MACH_FSG - bool - prompt "Freecom FSG-3" - select FORCE_PCI - help - Say 'Y' here if you want your kernel to support Freecom's - FSG-3 device. For more information on this platform, - see http://www.nslu2-linux.org/wiki/FSG3/HomePage - -config MACH_ARCOM_VULCAN - bool - prompt "Arcom/Eurotech Vulcan" - select FORCE_PCI - help - Say 'Y' here if you want your kernel to support Arcom's - Vulcan board. - -# -# Certain registers and IRQs are only enabled if supporting IXP465 CPUs -# -config CPU_IXP46X - bool - depends on MACH_IXDP465 - default y - -config CPU_IXP43X - bool - depends on MACH_KIXRP435 - default y - -config MACH_GTWX5715 - bool "Gemtek WX5715 (Linksys WRV54G)" - depends on ARCH_IXP4XX - select FORCE_PCI - help - This board is currently inside the Linksys WRV54G Gateways. - - IXP425 - 266mhz - 32mb SDRAM - 8mb Flash - miniPCI slot 0 does not have a card connector soldered to the board - miniPCI slot 1 has an ISL3880 802.11g card (Prism54) - npe0 is connected to a Kendin KS8995M Switch (4 ports) - npe1 is the "wan" port - "Console" UART is available on J11 as console - "High Speed" UART is n/c (as far as I can tell) - 20 Pin ARM/Xscale JTAG interface on J2 - -config MACH_DEVIXP - bool "Omicron DEVIXP" - help - Say 'Y' here if you want your kernel to support the DEVIXP - board from OMICRON electronics GmbH. - -config MACH_MICCPT - bool "Omicron MICCPT" - select FORCE_PCI - help - Say 'Y' here if you want your kernel to support the MICCPT - board from OMICRON electronics GmbH. - -config MACH_MIC256 - bool "Omicron MIC256" - help - Say 'Y' here if you want your kernel to support the MIC256 - board from OMICRON electronics GmbH. - -comment "IXP4xx Options" - -config IXP4XX_INDIRECT_PCI - bool "Use indirect PCI memory access" - depends on PCI - help - IXP4xx provides two methods of accessing PCI memory space: - - 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). - To access PCI via this space, we simply ioremap() the BAR - into the kernel and we can use the standard read[bwl]/write[bwl] - macros. This is the preferred method due to speed but it - limits the system to just 64MB of PCI memory. This can be - problematic if using video cards and other memory-heavy devices. - - 2) If > 64MB of memory space is required, the IXP4xx can be - configured to use indirect registers to access the whole PCI - memory space. This currently allows for up to 1 GB (0x10000000 - to 0x4FFFFFFF) of memory on the bus. The disadvantage of this - is that every PCI access requires three local register accesses - plus a spinlock, but in some cases the performance hit is - acceptable. In addition, you cannot mmap() PCI devices in this - case due to the indirect nature of the PCI window. - - By default, the direct method is used. Choose this option if you - need to use the indirect method instead. If you don't know - what you need, leave this option unselected. - -endmenu - -endif + Support for Intel's IXP4XX (XScale) family of processors. |