1 files changed, 0 insertions, 85 deletions
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
deleted file mode 100644
index 3b2bcaf4bb01..000000000000
--- a/arch/arm/mach-omap1/board-generic.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-generic.c
- *
- * Modified from board-innovator1510.c
- *
- * Code for generic OMAP board. Should work on many OMAP systems where
- * the device drivers take care of all the necessary hardware initialization.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-#include "mux.h"
-#include "usb.h"
-#include "common.h"
-
-/* assume no Mini-AB port */
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct omap_usb_config generic1510_usb_config __initdata = {
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 3,
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct omap_usb_config generic1610_usb_config __initdata = {
-#ifdef CONFIG_USB_OTG
-	.otg		= 1,
-#endif
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 6,
-};
-#endif
-
-static void __init omap_generic_init(void)
-{
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap15xx()) {
-		/* mux pins for uarts */
-		omap_cfg_reg(UART1_TX);
-		omap_cfg_reg(UART1_RTS);
-		omap_cfg_reg(UART2_TX);
-		omap_cfg_reg(UART2_RTS);
-		omap_cfg_reg(UART3_TX);
-		omap_cfg_reg(UART3_RX);
-
-		omap1_usb_init(&generic1510_usb_config);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (!cpu_is_omap1510()) {
-		omap1_usb_init(&generic1610_usb_config);
-	}
-#endif
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-}
-
-MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
-	/* Maintainer: Tony Lindgren <tony@atomide.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early	= omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_generic_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END