diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-innovator.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-innovator.c | 481 |
1 files changed, 0 insertions, 481 deletions
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c deleted file mode 100644 index 6deb4ca079e9..000000000000 --- a/arch/arm/mach-omap1/board-innovator.c +++ /dev/null @@ -1,481 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-omap1/board-innovator.c - * - * Board specific inits for OMAP-1510 and OMAP-1610 Innovator - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon <glonnon@ridgerun.com> - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/input.h> -#include <linux/smc91x.h> -#include <linux/omapfb.h> -#include <linux/platform_data/keypad-omap.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "tc.h" -#include "mux.h" -#include "flash.h" -#include "hardware.h" -#include "usb.h" -#include "iomap.h" -#include "common.h" -#include "mmc.h" - -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define INNOVATOR1610_ETHR_START 0x04000300 - -static const unsigned int innovator_keymap[] = { - KEY(0, 0, KEY_F1), - KEY(3, 0, KEY_DOWN), - KEY(1, 1, KEY_F2), - KEY(2, 1, KEY_RIGHT), - KEY(0, 2, KEY_F3), - KEY(1, 2, KEY_F4), - KEY(2, 2, KEY_UP), - KEY(2, 3, KEY_ENTER), - KEY(3, 3, KEY_LEFT), -}; - -static struct mtd_partition innovator_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "bootloader", - .offset = 0, - .size = SZ_128K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "params", - .offset = MTDPART_OFS_APPEND, - .size = SZ_128K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* rest of flash1 is a file system */ - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = SZ_16M - SZ_2M - 2 * SZ_128K, - .mask_flags = 0 - }, - /* file system */ - { - .name = "filesystem", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct physmap_flash_data innovator_flash_data = { - .width = 2, - .set_vpp = omap1_set_vpp, - .parts = innovator_partitions, - .nr_parts = ARRAY_SIZE(innovator_partitions), -}; - -static struct resource innovator_flash_resource = { - .start = OMAP_CS0_PHYS, - .end = OMAP_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device innovator_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &innovator_flash_data, - }, - .num_resources = 1, - .resource = &innovator_flash_resource, -}; - -static struct resource innovator_kp_resources[] = { - [0] = { - .start = INT_KEYBOARD, - .end = INT_KEYBOARD, - .flags = IORESOURCE_IRQ, - }, -}; - -static const struct matrix_keymap_data innovator_keymap_data = { - .keymap = innovator_keymap, - .keymap_size = ARRAY_SIZE(innovator_keymap), -}; - -static struct omap_kp_platform_data innovator_kp_data = { - .rows = 8, - .cols = 8, - .keymap_data = &innovator_keymap_data, - .delay = 4, -}; - -static struct platform_device innovator_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &innovator_kp_data, - }, - .num_resources = ARRAY_SIZE(innovator_kp_resources), - .resource = innovator_kp_resources, -}; - -static struct smc91x_platdata innovator_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -#ifdef CONFIG_ARCH_OMAP15XX - -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> - - -/* Only FPGA needs to be mapped here. All others are done with ioremap */ -static struct map_desc innovator1510_io_desc[] __initdata = { - { - .virtual = OMAP1510_FPGA_BASE, - .pfn = __phys_to_pfn(OMAP1510_FPGA_START), - .length = OMAP1510_FPGA_SIZE, - .type = MT_DEVICE - } -}; - -static struct resource innovator1510_smc91x_resources[] = { - [0] = { - .start = OMAP1510_FPGA_ETHR_START, /* Physical */ - .end = OMAP1510_FPGA_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP1510_INT_ETHER, - .end = OMAP1510_INT_ETHER, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -static struct platform_device innovator1510_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &innovator_smc91x_info, - }, - .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources), - .resource = innovator1510_smc91x_resources, -}; - -static struct platform_device innovator1510_lcd_device = { - .name = "lcd_inn1510", - .id = -1, - .dev = { - .platform_data = (void __force *)OMAP1510_FPGA_LCD_PANEL_CONTROL, - } -}; - -static struct platform_device innovator1510_spi_device = { - .name = "spi_inn1510", - .id = -1, -}; - -static struct platform_device *innovator1510_devices[] __initdata = { - &innovator_flash_device, - &innovator1510_smc91x_device, - &innovator_kp_device, - &innovator1510_lcd_device, - &innovator1510_spi_device, -}; - -static int innovator_get_pendown_state(void) -{ - return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5)); -} - -static const struct ads7846_platform_data innovator1510_ts_info = { - .model = 7846, - .vref_delay_usecs = 100, /* internal, no capacitor */ - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .get_pendown_state = innovator_get_pendown_state, -}; - -static struct spi_board_info __initdata innovator1510_boardinfo[] = { { - /* FPGA (bus "10") CS0 has an ads7846e */ - .modalias = "ads7846", - .platform_data = &innovator1510_ts_info, - .irq = OMAP1510_INT_FPGA_TS, - .max_speed_hz = 120000 /* max sample rate at 3V */ - * 26 /* command + data + overhead */, - .bus_num = 10, - .chip_select = 0, -} }; - -#endif /* CONFIG_ARCH_OMAP15XX */ - -#ifdef CONFIG_ARCH_OMAP16XX - -static struct resource innovator1610_smc91x_resources[] = { - [0] = { - .start = INNOVATOR1610_ETHR_START, /* Physical */ - .end = INNOVATOR1610_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device innovator1610_smc91x_device = { - .name = "smc91x", - .id = 0, - .dev = { - .platform_data = &innovator_smc91x_info, - }, - .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources), - .resource = innovator1610_smc91x_resources, -}; - -static struct platform_device innovator1610_lcd_device = { - .name = "inn1610_lcd", - .id = -1, -}; - -static struct platform_device *innovator1610_devices[] __initdata = { - &innovator_flash_device, - &innovator1610_smc91x_device, - &innovator_kp_device, - &innovator1610_lcd_device, -}; - -#endif /* CONFIG_ARCH_OMAP16XX */ - -static void __init innovator_init_smc91x(void) -{ - if (cpu_is_omap1510()) { - __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1, - OMAP1510_FPGA_RST); - udelay(750); - } else { - if (gpio_request(0, "SMC91x irq") < 0) { - printk("Error requesting gpio 0 for smc91x irq\n"); - return; - } - } -} - -#ifdef CONFIG_ARCH_OMAP15XX -/* - * Board specific gang-switched transceiver power on/off. - */ -static int innovator_omap_ohci_transceiver_power(int on) -{ - if (on) - __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) - | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), - INNOVATOR_FPGA_CAM_USB_CONTROL); - else - __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL) - & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), - INNOVATOR_FPGA_CAM_USB_CONTROL); - - return 0; -} - -static struct omap_usb_config innovator1510_usb_config __initdata = { - /* for bundled non-standard host and peripheral cables */ - .hmc_mode = 4, - - .register_host = 1, - .pins[1] = 6, - .pins[2] = 6, /* Conflicts with UART2 */ - - .register_dev = 1, - .pins[0] = 2, - - .transceiver_power = innovator_omap_ohci_transceiver_power, -}; - -static const struct omap_lcd_config innovator1510_lcd_config __initconst = { - .ctrl_name = "internal", -}; -#endif - -#ifdef CONFIG_ARCH_OMAP16XX -static struct omap_usb_config h2_usb_config __initdata = { - /* usb1 has a Mini-AB port and external isp1301 transceiver */ - .otg = 2, - -#if IS_ENABLED(CONFIG_USB_OMAP) - .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ - /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ -#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) - /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ - .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ -#endif - - .pins[1] = 3, -}; - -static const struct omap_lcd_config innovator1610_lcd_config __initconst = { - .ctrl_name = "internal", -}; -#endif - -#if IS_ENABLED(CONFIG_MMC_OMAP) - -static int mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - if (power_on) - __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3), - OMAP1510_FPGA_POWER); - else - __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3), - OMAP1510_FPGA_POWER); - - return 0; -} - -/* - * Innovator could use the following functions tested: - * - mmc_get_wp that uses OMAP_MPUIO(3) - * - mmc_get_cover_state that uses FPGA F4 UIO43 - */ -static struct omap_mmc_platform_data mmc1_data = { - .nr_slots = 1, - .slots[0] = { - .set_power = mmc_set_power, - .wires = 4, - .name = "mmcblk", - }, -}; - -static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC]; - -static void __init innovator_mmc_init(void) -{ - mmc_data[0] = &mmc1_data; - omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC); -} - -#else -static inline void innovator_mmc_init(void) -{ -} -#endif - -static void __init innovator_init(void) -{ - if (cpu_is_omap1510()) - omap1510_fpga_init_irq(); - innovator_init_smc91x(); - -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - unsigned char reg; - - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - reg = __raw_readb(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM1_EN; - __raw_writeb(reg, OMAP1510_FPGA_POWER); - udelay(10); - - reg = __raw_readb(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM2_EN; - __raw_writeb(reg, OMAP1510_FPGA_POWER); - udelay(10); - - platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); - spi_register_board_info(innovator1510_boardinfo, - ARRAY_SIZE(innovator1510_boardinfo)); - } -#endif -#ifdef CONFIG_ARCH_OMAP16XX - if (!cpu_is_omap1510()) { - innovator1610_smc91x_resources[1].start = gpio_to_irq(0); - innovator1610_smc91x_resources[1].end = gpio_to_irq(0); - platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices)); - } -#endif - -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - omap1_usb_init(&innovator1510_usb_config); - omapfb_set_lcd_config(&innovator1510_lcd_config); - } -#endif -#ifdef CONFIG_ARCH_OMAP16XX - if (cpu_is_omap1610()) { - omap1_usb_init(&h2_usb_config); - omapfb_set_lcd_config(&innovator1610_lcd_config); - } -#endif - omap_serial_init(); - omap_register_i2c_bus(1, 100, NULL, 0); - innovator_mmc_init(); -} - -/* - * REVISIT: Assume 15xx for now, we don't want to do revision check - * until later on. The right way to fix this is to set up a different - * machine_id for 16xx Innovator, or use device tree. - */ -static void __init innovator_map_io(void) -{ -#ifdef CONFIG_ARCH_OMAP15XX - omap15xx_map_io(); - - iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc)); - udelay(10); /* Delay needed for FPGA */ - - /* Dump the Innovator FPGA rev early - useful info for support. */ - pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n", - __raw_readb(OMAP1510_FPGA_REV_HIGH), - __raw_readb(OMAP1510_FPGA_REV_LOW), - __raw_readb(OMAP1510_FPGA_BOARD_REV)); -#endif -} - -MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") - /* Maintainer: MontaVista Software, Inc. */ - .atag_offset = 0x100, - .map_io = innovator_map_io, - .init_early = omap1_init_early, - .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, - .init_machine = innovator_init, - .init_late = omap1_init_late, - .init_time = omap1_timer_init, - .restart = omap1_restart, -MACHINE_END |