summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/sleep43xx.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/sleep43xx.S')
-rw-r--r--arch/arm/mach-omap2/sleep43xx.S110
1 files changed, 104 insertions, 6 deletions
diff --git a/arch/arm/mach-omap2/sleep43xx.S b/arch/arm/mach-omap2/sleep43xx.S
index 8903814a6677..5b9343b58fc7 100644
--- a/arch/arm/mach-omap2/sleep43xx.S
+++ b/arch/arm/mach-omap2/sleep43xx.S
@@ -9,7 +9,7 @@
#include <generated/ti-pm-asm-offsets.h>
#include <linux/linkage.h>
#include <linux/ti-emif-sram.h>
-
+#include <linux/platform_data/pm33xx.h>
#include <asm/assembler.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/memory.h>
@@ -22,6 +22,9 @@
#include "prm33xx.h"
#include "prcm43xx.h"
+/* replicated define because linux/bitops.h cannot be included in assembly */
+#define BIT(nr) (1 << (nr))
+
#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED 0x00030000
#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003
#define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002
@@ -45,12 +48,25 @@
AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
#define AM43XX_PRM_EMIF_CTRL_OFFSET 0x0030
+#define RTC_SECONDS_REG 0x0
+#define RTC_PMIC_REG 0x98
+#define RTC_PMIC_POWER_EN BIT(16)
+#define RTC_PMIC_EXT_WAKEUP_STS BIT(12)
+#define RTC_PMIC_EXT_WAKEUP_POL BIT(4)
+#define RTC_PMIC_EXT_WAKEUP_EN BIT(0)
+
.arm
.align 3
ENTRY(am43xx_do_wfi)
stmfd sp!, {r4 - r11, lr} @ save registers on stack
+ /* Save wfi_flags arg to data space */
+ mov r4, r0
+ adr r3, am43xx_pm_ro_sram_data
+ ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
+ str r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET]
+
#ifdef CONFIG_CACHE_L2X0
/* Retrieve l2 cache virt address BEFORE we shut off EMIF */
ldr r1, get_l2cache_base
@@ -58,6 +74,10 @@ ENTRY(am43xx_do_wfi)
mov r8, r0
#endif
+ /* Only flush cache is we know we are losing MPU context */
+ tst r4, #WFI_FLAG_FLUSH_CACHE
+ beq cache_skip_flush
+
/*
* Flush all data from the L1 and L2 data cache before disabling
* SCTLR.C bit.
@@ -128,13 +148,47 @@ sync:
bne sync
#endif
+ /* Restore wfi_flags */
+ adr r3, am43xx_pm_ro_sram_data
+ ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
+ ldr r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET]
+
+cache_skip_flush:
+ /*
+ * If we are trying to enter RTC+DDR mode we must perform
+ * a read from the rtc address space to ensure translation
+ * presence in the TLB to avoid page table walk after DDR
+ * is unavailable.
+ */
+ tst r4, #WFI_FLAG_RTC_ONLY
+ beq skip_rtc_va_refresh
+
+ adr r3, am43xx_pm_ro_sram_data
+ ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET]
+ ldr r0, [r1]
+
+skip_rtc_va_refresh:
+ /* Check if we want self refresh */
+ tst r4, #WFI_FLAG_SELF_REFRESH
+ beq emif_skip_enter_sr
+
adr r9, am43xx_emif_sram_table
ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
blx r3
+emif_skip_enter_sr:
+ /* Only necessary if PER is losing context */
+ tst r4, #WFI_FLAG_SAVE_EMIF
+ beq emif_skip_save
+
ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
- blx r3
+ blx r3
+
+emif_skip_save:
+ /* Only can disable EMIF if we have entered self refresh */
+ tst r4, #WFI_FLAG_SELF_REFRESH
+ beq emif_skip_disable
/* Disable EMIF */
ldr r1, am43xx_virt_emif_clkctrl
@@ -148,6 +202,38 @@ wait_emif_disable:
cmp r2, r3
bne wait_emif_disable
+emif_skip_disable:
+ tst r4, #WFI_FLAG_RTC_ONLY
+ beq skip_rtc_only
+
+ adr r3, am43xx_pm_ro_sram_data
+ ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET]
+
+ ldr r0, [r1, #RTC_PMIC_REG]
+ orr r0, r0, #RTC_PMIC_POWER_EN
+ orr r0, r0, #RTC_PMIC_EXT_WAKEUP_STS
+ orr r0, r0, #RTC_PMIC_EXT_WAKEUP_EN
+ orr r0, r0, #RTC_PMIC_EXT_WAKEUP_POL
+ str r0, [r1, #RTC_PMIC_REG]
+ ldr r0, [r1, #RTC_PMIC_REG]
+ /* Wait for 2 seconds to lose power */
+ mov r3, #2
+ ldr r2, [r1, #RTC_SECONDS_REG]
+rtc_loop:
+ ldr r0, [r1, #RTC_SECONDS_REG]
+ cmp r0, r2
+ beq rtc_loop
+ mov r2, r0
+ subs r3, r3, #1
+ bne rtc_loop
+
+ b re_enable_emif
+
+skip_rtc_only:
+
+ tst r4, #WFI_FLAG_WAKE_M3
+ beq wkup_m3_skip
+
/*
* For the MPU WFI to be registered as an interrupt
* to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
@@ -165,6 +251,7 @@ wait_emif_disable:
mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP
str r2, [r1]
+wkup_m3_skip:
/*
* Execute a barrier instruction to ensure that all cache,
* TLB and branch predictor maintenance operations issued
@@ -209,6 +296,7 @@ wait_emif_disable:
mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
str r2, [r1]
+re_enable_emif:
/* Re-enable EMIF */
ldr r1, am43xx_virt_emif_clkctrl
mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
@@ -218,6 +306,9 @@ wait_emif_enable:
cmp r2, r3
bne wait_emif_enable
+ tst r4, #WFI_FLAG_FLUSH_CACHE
+ beq cache_skip_restore
+
/*
* Set SCTLR.C bit to allow data cache allocation
*/
@@ -226,9 +317,16 @@ wait_emif_enable:
mcr p15, 0, r0, c1, c0, 0
isb
- ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
- blx r1
+cache_skip_restore:
+ /* Only necessary if PER is losing context */
+ tst r4, #WFI_FLAG_SELF_REFRESH
+ beq emif_skip_exit_sr_abt
+
+ adr r9, am43xx_emif_sram_table
+ ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
+ blx r1
+emif_skip_exit_sr_abt:
/* Let the suspend code know about the abort */
mov r0, #1
ldmfd sp!, {r4 - r11, pc} @ restore regs and return
@@ -333,8 +431,6 @@ ENDPROC(am43xx_resume_from_deep_sleep)
* Local variables
*/
.align
-resume_addr:
- .word cpu_resume - PAGE_OFFSET + 0x80000000
kernel_flush:
.word v7_flush_dcache_all
ddr_start:
@@ -381,6 +477,8 @@ ENTRY(am43xx_pm_sram)
.word am43xx_emif_sram_table
.word am43xx_pm_ro_sram_data
+resume_addr:
+ .word cpu_resume - PAGE_OFFSET + 0x80000000
.align 3
ENTRY(am43xx_pm_ro_sram_data)