diff options
Diffstat (limited to 'arch/arm/mach-omap2')
| -rw-r--r-- | arch/arm/mach-omap2/board-am3517evm.c | 30 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3pandora.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rx51-peripherals.c | 19 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-zoom-peripherals.c | 66 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-zoom2.c | 36 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock2420_data.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock2430_data.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clock3xxx_data.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/devices.c | 110 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/hsmmc.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/include/mach/board-zoom.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/usb-musb.c | 4 |
12 files changed, 231 insertions, 46 deletions
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 3d7c59839abe..e1f8dda62799 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -396,6 +396,31 @@ static void __init am3517_evm_init_irq(void) omap_gpio_init(); } +static struct omap_musb_board_data musb_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 500, +}; + +static __init void am3517_evm_musb_init(void) +{ + u32 devconf2; + + /* + * Set up USB clock/mode in the DEVCONF2 register. + */ + devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); + + /* USB2.0 PHY reference clock is 13 MHz */ + devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE); + devconf2 |= CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN + | CONF2_DATPOL; + + omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); + + usb_musb_init(&musb_board_data); +} + static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ @@ -414,6 +439,8 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* USB OTG DRVVBUS offset = 0x212 */ + OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -480,6 +507,9 @@ static void __init am3517_evm_init(void) ARRAY_SIZE(am3517evm_i2c1_boardinfo)); /*Ethernet*/ am3517_evm_ethernet_init(&am3517_evm_emac_pdata); + + /* MUSB */ + am3517_evm_musb_init(); } MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index b7d6df4e3cf9..41d6f549070c 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -25,7 +25,7 @@ #include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> -#include <linux/spi/wl12xx.h> +#include <linux/wl12xx.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> #include <linux/leds.h> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9a5eb87425fc..63d786bccb67 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -14,7 +14,7 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> -#include <linux/spi/wl12xx.h> +#include <linux/wl12xx.h> #include <linux/i2c.h> #include <linux/i2c/twl.h> #include <linux/clk.h> @@ -23,6 +23,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/mmc/host.h> +#include <sound/tlv320aic3x.h> #include <plat/mcspi.h> #include <plat/board.h> @@ -689,7 +690,6 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = { }; - static struct twl4030_platform_data rx51_twldata __initdata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -710,10 +710,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vio = &rx51_vio, }; -static struct aic3x_pdata rx51_aic3x_data __initdata = { - .gpio_reset = 60, -}; - static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = { .id = TPA6130A2, .power_gpio = 98, @@ -728,6 +724,17 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { }, }; +/* Audio setup data */ +static struct aic3x_setup_data rx51_aic34_setup = { + .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, + .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, +}; + +static struct aic3x_pdata rx51_aic3x_data = { + .setup = &rx51_aic34_setup, + .gpio_reset = 60, +}; + static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { { I2C_BOARD_INFO("tlv320aic3x", 0x18), diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6b3984964cc5..bc8232845d7a 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -16,6 +16,8 @@ #include <linux/gpio.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/wl12xx.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -24,9 +26,14 @@ #include <plat/common.h> #include <plat/usb.h> +#include <mach/board-zoom.h> + #include "mux.h" #include "hsmmc.h" +#define OMAP_ZOOM_WLAN_PMENA_GPIO (101) +#define OMAP_ZOOM_WLAN_IRQ_GPIO (162) + /* Zoom2 has Qwerty keyboard*/ static int board_keymap[] = { KEY(0, 0, KEY_E), @@ -106,6 +113,11 @@ static struct regulator_consumer_supply zoom_vmmc2_supply = { .supply = "vmmc", }; +static struct regulator_consumer_supply zoom_vmmc3_supply = { + .supply = "vmmc", + .dev_name = "mmci-omap-hs.2", +}; + /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data zoom_vmmc1 = { .constraints = { @@ -151,6 +163,38 @@ static struct regulator_init_data zoom_vsim = { .consumer_supplies = &zoom_vsim_supply, }; +static struct regulator_init_data zoom_vmmc3 = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vmmc3_supply, +}; + +static struct fixed_voltage_config zoom_vwlan = { + .supply_name = "vwl1271", + .microvolts = 1800000, /* 1.8V */ + .gpio = OMAP_ZOOM_WLAN_PMENA_GPIO, + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &zoom_vmmc3, +}; + +static struct platform_device omap_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &zoom_vwlan, + }, +}; + +struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { + .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO), + /* ZOOM ref clock is 26 MHz */ + .board_ref_clock = 1, +}; + static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "external", @@ -168,6 +212,14 @@ static struct omap2_hsmmc_info mmc[] __initdata = { .nonremovable = true, .power_saving = true, }, + { + .name = "wl1271", + .mmc = 3, + .caps = MMC_CAP_4_BIT_DATA, + .gpio_wp = -EINVAL, + .gpio_cd = -EINVAL, + .nonremovable = true, + }, {} /* Terminator */ }; @@ -188,6 +240,11 @@ static int zoom_twl_gpio_setup(struct device *dev, return 0; } +/* EXTMUTE callback function */ +void zoom2_set_hs_extmute(int mute) +{ + gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); +} static int zoom_batt_table[] = { /* 0 C*/ @@ -257,6 +314,11 @@ static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { static int __init omap_i2c_init(void) { + if (machine_is_omap_zoom2()) { + zoom_audio_data.ramp_delay_value = 3; /* 161 ms */ + zoom_audio_data.hs_extmute = 1; + zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute; + } omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo, ARRAY_SIZE(zoom_i2c_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); @@ -279,7 +341,11 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { + if (wl12xx_set_platform_data(&omap_zoom_wlan_data)) + pr_err("error setting wl12xx data\n"); + omap_i2c_init(); + platform_device_register(&omap_vwlan_device); usb_musb_init(&musb_board_data); enable_board_wakeup_source(); } diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 24bbd0def64f..4ccbc32386a0 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/i2c/twl.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -34,41 +35,6 @@ static void __init omap_zoom2_init_irq(void) omap_gpio_init(); } -/* REVISIT: These audio entries can be removed once MFD code is merged */ -#if 0 - -static struct twl4030_madc_platform_data zoom2_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data zoom2_audio_data = { - .audio_mclk = 26000000, -}; - -static struct twl4030_codec_data zoom2_codec_data = { - .audio_mclk = 26000000, - .audio = &zoom2_audio_data, -}; - -static struct twl4030_platform_data zoom2_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ - .bci = &zoom2_bci_data, - .madc = &zoom2_madc_data, - .usb = &zoom2_usb_data, - .gpio = &zoom2_gpio_data, - .keypad = &zoom2_kp_twl4030_data, - .codec = &zoom2_codec_data, - .vmmc1 = &zoom2_vmmc1, - .vmmc2 = &zoom2_vmmc2, - .vsim = &zoom2_vsim, - -}; - -#endif - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* WLAN IRQ - GPIO 162 */ diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 37d65d62ed8f..5f2066a6ba74 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1838,7 +1838,7 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "des_ick", &des_ick, CK_242X), CLK("omap-sham", "ick", &sha_ick, CK_242X), CLK("omap_rng", "ick", &rng_ick, CK_242X), - CLK(NULL, "aes_ick", &aes_ick, CK_242X), + CLK("omap-aes", "ick", &aes_ick, CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK("musb_hdrc", "fck", &osc_ck, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index b33118fb6a87..701a1716019e 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1926,7 +1926,7 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "des_ick", &des_ick, CK_243X), CLK("omap-sham", "ick", &sha_ick, CK_243X), CLK("omap_rng", "ick", &rng_ick, CK_243X), - CLK(NULL, "aes_ick", &aes_ick, CK_243X), + CLK("omap-aes", "ick", &aes_ick, CK_243X), CLK(NULL, "pka_ick", &pka_ick, CK_243X), CLK(NULL, "usb_fck", &usb_fck, CK_243X), CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index dfdce2d82779..c73906d17458 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3288,7 +3288,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2 | CK_AM35XX), CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2 | CK_AM35XX), CLK(NULL, "icr_ick", &icr_ick, CK_343X), - CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), + CLK("omap-aes", "ick", &aes2_ick, CK_343X), CLK("omap-sham", "ick", &sha12_ick, CK_343X), CLK(NULL, "des2_ick", &des2_ick, CK_343X), CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_3XXX), diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 2dbb265bedd4..c5cf1ba08a6f 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -25,6 +25,7 @@ #include <plat/control.h> #include <plat/tc.h> #include <plat/board.h> +#include <plat/mcbsp.h> #include <mach/gpio.h> #include <plat/mmc.h> #include <plat/dma.h> @@ -235,6 +236,43 @@ static inline void omap_init_mbox(void) { } static inline void omap_init_sti(void) {} +#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) + +static struct platform_device omap_pcm = { + .name = "omap-pcm-audio", + .id = -1, +}; + +/* + * OMAP2420 has 2 McBSP ports + * OMAP2430 has 5 McBSP ports + * OMAP3 has 5 McBSP ports + * OMAP4 has 4 McBSP ports + */ +OMAP_MCBSP_PLATFORM_DEVICE(1); +OMAP_MCBSP_PLATFORM_DEVICE(2); +OMAP_MCBSP_PLATFORM_DEVICE(3); +OMAP_MCBSP_PLATFORM_DEVICE(4); +OMAP_MCBSP_PLATFORM_DEVICE(5); + +static void omap_init_audio(void) +{ + platform_device_register(&omap_mcbsp1); + platform_device_register(&omap_mcbsp2); + if (cpu_is_omap243x() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + platform_device_register(&omap_mcbsp3); + platform_device_register(&omap_mcbsp4); + } + if (cpu_is_omap243x() || cpu_is_omap34xx()) + platform_device_register(&omap_mcbsp5); + + platform_device_register(&omap_pcm); +} + +#else +static inline void omap_init_audio(void) {} +#endif + #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <plat/mcspi.h> @@ -498,6 +536,76 @@ static void omap_init_sham(void) static inline void omap_init_sham(void) { } #endif +#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +static struct resource omap2_aes_resources[] = { + { + .start = OMAP24XX_SEC_AES_BASE, + .end = OMAP24XX_SEC_AES_BASE + 0x4C, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP24XX_DMA_AES_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = OMAP24XX_DMA_AES_RX, + .flags = IORESOURCE_DMA, + } +}; +static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources); +#else +#define omap2_aes_resources NULL +#define omap2_aes_resources_sz 0 +#endif + +#ifdef CONFIG_ARCH_OMAP34XX +static struct resource omap3_aes_resources[] = { + { + .start = OMAP34XX_SEC_AES_BASE, + .end = OMAP34XX_SEC_AES_BASE + 0x4C, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP34XX_DMA_AES2_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = OMAP34XX_DMA_AES2_RX, + .flags = IORESOURCE_DMA, + } +}; +static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources); +#else +#define omap3_aes_resources NULL +#define omap3_aes_resources_sz 0 +#endif + +static struct platform_device aes_device = { + .name = "omap-aes", + .id = -1, +}; + +static void omap_init_aes(void) +{ + if (cpu_is_omap24xx()) { + aes_device.resource = omap2_aes_resources; + aes_device.num_resources = omap2_aes_resources_sz; + } else if (cpu_is_omap34xx()) { + aes_device.resource = omap3_aes_resources; + aes_device.num_resources = omap3_aes_resources_sz; + } else { + pr_err("%s: platform not supported\n", __func__); + return; + } + platform_device_register(&aes_device); +} + +#else +static inline void omap_init_aes(void) { } +#endif + /*-------------------------------------------------------------------------*/ #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) @@ -847,6 +955,7 @@ static int __init omap2_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_hsmmc_reset(); + omap_init_audio(); omap_init_camera(); omap_init_mbox(); omap_init_mcspi(); @@ -854,6 +963,7 @@ static int __init omap2_init_devices(void) omap_hdq_init(); omap_init_sti(); omap_init_sham(); + omap_init_aes(); omap_init_vout(); return 0; diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 1fe6f0187177..0f8a2e6ee284 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -23,7 +23,7 @@ struct omap2_hsmmc_info { char *name; /* or NULL for default */ struct device *dev; /* returned: pointer to mmc adapter */ int ocr_mask; /* temporary HACK */ - /* Remux (pad configuation) when powering on/off */ + /* Remux (pad configuration) when powering on/off */ void (*remux)(struct device *dev, int slot, int power_on); /* init some special card */ void (*init_card)(struct mmc_card *card); diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h index 3af69d2c3dcd..80591fda8f8f 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h @@ -9,3 +9,5 @@ extern void __init board_nand_init(struct mtd_partition *, u8 nr_parts, u8 cs); extern int __init zoom_debugboard_init(void); extern void __init zoom_peripherals_init(void); + +#define ZOOM2_HEADSET_EXTMUTE_GPIO 153 diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 33a5cde1c227..72605584bfff 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -28,6 +28,7 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/am35xx.h> #include <plat/usb.h> #ifdef CONFIG_USB_MUSB_SOC @@ -89,6 +90,9 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) { if (cpu_is_omap243x()) { musb_resources[0].start = OMAP243X_HS_BASE; + } else if (cpu_is_omap3517() || cpu_is_omap3505()) { + musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE; + musb_resources[1].start = INT_35XX_USBOTG_IRQ; } else if (cpu_is_omap34xx()) { musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE; } else if (cpu_is_omap44xx()) { |