summaryrefslogtreecommitdiff
path: root/arch/arm/mach-orion5x
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-orion5x')
-rw-r--r--arch/arm/mach-orion5x/board-d2net.c16
-rw-r--r--arch/arm/mach-orion5x/board-mss2.c2
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c69
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c2
-rw-r--r--arch/arm/mach-orion5x/mv2120-setup.c31
-rw-r--r--arch/arm/mach-orion5x/net2big-setup.c23
-rw-r--r--arch/arm/mach-orion5x/terastation_pro2-setup.c2
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c2
-rw-r--r--arch/arm/mach-orion5x/ts409-setup.c27
9 files changed, 126 insertions, 48 deletions
diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c
index 0297e302d7bc..09bf366d05ff 100644
--- a/arch/arm/mach-orion5x/board-d2net.c
+++ b/arch/arm/mach-orion5x/board-d2net.c
@@ -14,6 +14,7 @@
#include <linux/irq.h>
#include <linux/leds.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
@@ -55,12 +56,9 @@ static struct gpio_led d2net_leds[] = {
{
.name = "d2net:blue:sata",
.default_trigger = "default-on",
- .gpio = D2NET_GPIO_BLUE_LED_OFF,
- .active_low = 1,
},
{
.name = "d2net:red:fail",
- .gpio = D2NET_GPIO_RED_LED,
},
};
@@ -77,6 +75,17 @@ static struct platform_device d2net_gpio_leds = {
},
};
+static struct gpiod_lookup_table d2net_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("orion_gpio0", D2NET_GPIO_BLUE_LED_OFF, NULL,
+ 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", D2NET_GPIO_RED_LED, NULL,
+ 1, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init d2net_gpio_leds_init(void)
{
int err;
@@ -91,6 +100,7 @@ static void __init d2net_gpio_leds_init(void)
if (err)
pr_err("d2net: failed to configure blue LED blink GPIO\n");
+ gpiod_add_lookup_table(&d2net_leds_gpio_table);
platform_device_register(&d2net_gpio_leds);
}
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
index b0f16d223adf..9e3d69891d2f 100644
--- a/arch/arm/mach-orion5x/board-mss2.c
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -82,5 +82,5 @@ static void mss2_power_off(void)
void __init mss2_init(void)
{
/* register mss2 specific power-off method */
- pm_power_off = mss2_power_off;
+ register_platform_power_off(mss2_power_off);
}
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index d69259b6b60d..fcd38ff7ca45 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -14,6 +14,7 @@
*
*/
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -254,37 +255,64 @@ error_fail:
static struct gpio_led dns323ab_leds[] = {
{
.name = "power:blue",
- .gpio = DNS323_GPIO_LED_POWER2,
.default_trigger = "default-on",
}, {
.name = "right:amber",
- .gpio = DNS323_GPIO_LED_RIGHT_AMBER,
- .active_low = 1,
}, {
.name = "left:amber",
- .gpio = DNS323_GPIO_LED_LEFT_AMBER,
- .active_low = 1,
},
};
+static struct gpiod_lookup_table dns323a1_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL,
+ 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL,
+ 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL,
+ 2, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
+/* B1 is the same but power LED is active high */
+static struct gpiod_lookup_table dns323b1_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL,
+ 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL,
+ 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL,
+ 2, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
static struct gpio_led dns323c_leds[] = {
{
.name = "power:blue",
- .gpio = DNS323C_GPIO_LED_POWER,
.default_trigger = "timer",
- .active_low = 1,
}, {
.name = "right:amber",
- .gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
- .active_low = 1,
}, {
.name = "left:amber",
- .gpio = DNS323C_GPIO_LED_LEFT_AMBER,
- .active_low = 1,
},
};
+static struct gpiod_lookup_table dns323c_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_POWER, NULL,
+ 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_RIGHT_AMBER, NULL,
+ 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_LEFT_AMBER, NULL,
+ 2, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
static struct gpio_led_platform_data dns323ab_led_data = {
.num_leds = ARRAY_SIZE(dns323ab_leds),
@@ -621,16 +649,21 @@ static void __init dns323_init(void)
/* The 5181 power LED is active low and requires
* DNS323_GPIO_LED_POWER1 to also be low.
*/
- dns323ab_leds[0].active_low = 1;
- gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
- gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
- fallthrough;
+ gpiod_add_lookup_table(&dns323a1_leds_gpio_table);
+ gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
+ gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+ i2c_register_board_info(0, dns323ab_i2c_devices,
+ ARRAY_SIZE(dns323ab_i2c_devices));
+
+ break;
case DNS323_REV_B1:
+ gpiod_add_lookup_table(&dns323b1_leds_gpio_table);
i2c_register_board_info(0, dns323ab_i2c_devices,
ARRAY_SIZE(dns323ab_i2c_devices));
break;
case DNS323_REV_C1:
/* Hookup LEDs & Buttons */
+ gpiod_add_lookup_table(&dns323c_leds_gpio_table);
dns323_gpio_leds.dev.platform_data = &dns323c_led_data;
dns323_button_device.dev.platform_data = &dns323c_button_data;
@@ -667,7 +700,7 @@ static void __init dns323_init(void)
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323a_power_off;
+ register_platform_power_off(dns323a_power_off);
break;
case DNS323_REV_B1:
/* 5182 built-in SATA init */
@@ -684,7 +717,7 @@ static void __init dns323_init(void)
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323b_power_off;
+ register_platform_power_off(dns323b_power_off);
break;
case DNS323_REV_C1:
/* 5182 built-in SATA init */
@@ -694,7 +727,7 @@ static void __init dns323_init(void)
if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323c_power_off;
+ register_platform_power_off(dns323c_power_off);
/* Now, -this- should theoretically be done by the sata_mv driver
* once I figure out what's going on there. Maybe the behaviour
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index acba06618080..339b10891808 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -373,7 +373,7 @@ static void __init kurobox_pro_init(void)
i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
/* register Kurobox Pro specific power-off method */
- pm_power_off = kurobox_pro_power_off;
+ register_platform_power_off(kurobox_pro_power_off);
}
#ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 2bf8ec75e908..5b0249f109cd 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -8,6 +8,7 @@
* License, or (at your option) any later version.
*/
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -139,34 +140,45 @@ static struct i2c_board_info __initdata mv2120_i2c_rtc = {
static struct gpio_led mv2120_led_pins[] = {
{
.name = "mv2120:blue:health",
- .gpio = 0,
},
{
.name = "mv2120:red:health",
- .gpio = 1,
},
{
.name = "mv2120:led:bright",
- .gpio = 4,
.default_trigger = "default-on",
},
{
.name = "mv2120:led:dimmed",
- .gpio = 5,
},
{
.name = "mv2120:red:sata0",
- .gpio = 8,
- .active_low = 1,
},
{
.name = "mv2120:red:sata1",
- .gpio = 9,
- .active_low = 1,
},
};
+static struct gpiod_lookup_table mv2120_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("orion_gpio0", 0, NULL,
+ 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("orion_gpio0", 1, NULL,
+ 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL,
+ 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL,
+ 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("orion_gpio0", 8, NULL,
+ 4, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", 9, NULL,
+ 5, GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static struct gpio_led_platform_data mv2120_led_data = {
.leds = mv2120_led_pins,
.num_leds = ARRAY_SIZE(mv2120_led_pins),
@@ -219,13 +231,14 @@ static void __init mv2120_init(void)
gpio_free(MV2120_GPIO_RTC_IRQ);
}
i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
+ gpiod_add_lookup_table(&mv2120_leds_gpio_table);
platform_device_register(&mv2120_leds);
/* register mv2120 specific power-off method */
if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
pr_err("mv2120: failed to setup power-off GPIO\n");
- pm_power_off = mv2120_power_off;
+ register_platform_power_off(mv2120_power_off);
}
/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 695cc683cd83..4afd9b4c71a9 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -18,6 +18,7 @@
#include <linux/i2c.h>
#include <linux/ata_platform.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/delay.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -214,19 +215,30 @@ err_free_1:
static struct gpio_led net2big_leds[] = {
{
.name = "net2big:red:power",
- .gpio = NET2BIG_GPIO_PWR_RED_LED,
},
{
.name = "net2big:blue:power",
- .gpio = NET2BIG_GPIO_PWR_BLUE_LED,
},
{
.name = "net2big:red:sata0",
- .gpio = NET2BIG_GPIO_SATA0_RED_LED,
},
{
.name = "net2big:red:sata1",
- .gpio = NET2BIG_GPIO_SATA1_RED_LED,
+ },
+};
+
+static struct gpiod_lookup_table net2big_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_RED_LED, NULL,
+ 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_BLUE_LED, NULL,
+ 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA0_RED_LED, NULL,
+ 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA1_RED_LED, NULL,
+ 3, GPIO_ACTIVE_HIGH),
+ { },
},
};
@@ -282,6 +294,7 @@ static void __init net2big_gpio_leds_init(void)
if (err)
pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
+ gpiod_add_lookup_table(&net2big_leds_gpio_table);
platform_device_register(&net2big_gpio_leds);
}
@@ -410,7 +423,7 @@ static void __init net2big_init(void)
if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = net2big_power_off;
+ register_platform_power_off(net2big_power_off);
else
pr_err("net2big: failed to configure power-off GPIO\n");
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 23a5521c6833..a9f01859d101 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -349,7 +349,7 @@ static void __init tsp2_init(void)
i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
/* register Terastation Pro II specific power-off method */
- pm_power_off = tsp2_power_off;
+ register_platform_power_off(tsp2_power_off);
}
MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index bab8ba0e01ab..de9092e992c5 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -314,7 +314,7 @@ static void __init qnap_ts209_init(void)
i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
/* register tsx09 specific power-off method */
- pm_power_off = qnap_tsx09_power_off;
+ register_platform_power_off(qnap_tsx09_power_off);
}
MACHINE_START(TS209, "QNAP TS-109/TS-209")
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 6f60dc1dfa22..725688aa5cba 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -8,6 +8,7 @@
* Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
*/
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -168,20 +169,27 @@ static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
static struct gpio_led ts409_led_pins[] = {
{
.name = "ts409:red:sata1",
- .gpio = 4,
- .active_low = 1,
}, {
.name = "ts409:red:sata2",
- .gpio = 5,
- .active_low = 1,
}, {
.name = "ts409:red:sata3",
- .gpio = 6,
- .active_low = 1,
}, {
.name = "ts409:red:sata4",
- .gpio = 7,
- .active_low = 1,
+ },
+};
+
+static struct gpiod_lookup_table ts409_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL,
+ 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL,
+ 1, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", 6, NULL,
+ 2, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", 7, NULL,
+ 3, GPIO_ACTIVE_LOW),
+ { },
},
};
@@ -300,10 +308,11 @@ static void __init qnap_ts409_init(void)
if (qnap_ts409_i2c_rtc.irq == 0)
pr_warn("qnap_ts409_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+ gpiod_add_lookup_table(&ts409_leds_gpio_table);
platform_device_register(&ts409_leds);
/* register tsx09 specific power-off method */
- pm_power_off = qnap_tsx09_power_off;
+ register_platform_power_off(qnap_tsx09_power_off);
}
MACHINE_START(TS409, "QNAP TS-409")
generated by cgit (git 2.34.1) at 2025-07-23 18:34:23 +0000