summaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/Kconfig')
-rw-r--r--arch/arm/mach-pxa/Kconfig573
1 files changed, 3 insertions, 570 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index b90d98bae68d..10e472f4fa43 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,10 +16,6 @@ menuconfig ARCH_PXA
if ARCH_PXA
-menu "Intel PXA2xx/PXA3xx Implementations"
-
-comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
-
config MACH_PXA25X_DT
bool "Support PXA25x platforms from device tree"
select PINCTRL
@@ -45,6 +41,8 @@ config MACH_PXA27X_DT
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
select CPU_PXA300
+ select CPU_PXA310
+ select CPU_PXA320
select PINCTRL
select POWER_SUPPLY
select PXA3xx
@@ -56,115 +54,7 @@ config MACH_PXA3XX_DT
if ATAGS
-config ARCH_LUBBOCK
- bool "Intel DBPXA250 Development Platform (aka Lubbock)"
- depends on UNUSED_BOARD_FILES
- select GPIO_REG
- select PXA25x
- select SA1111
-
-config MACH_MAINSTONE
- bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
- depends on UNUSED_BOARD_FILES
- select GPIO_REG
- select PXA27x
-
-config MACH_ZYLONITE
- bool
- select PXA3xx
-
-config MACH_ZYLONITE300
- bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA300
- select CPU_PXA310
- select MACH_ZYLONITE
-
-config MACH_ZYLONITE320
- bool "PXA3xx Development Platform (aka Zylonite) PXA320"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA320
- select MACH_ZYLONITE
-
-config MACH_LITTLETON
- bool "PXA3xx Form Factor Platform (aka Littleton)"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA300
- select CPU_PXA310
- select PXA3xx
-
-config MACH_TAVOREVB
- bool "PXA930 Evaluation Board (aka TavorEVB)"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA930
- select CPU_PXA935
- select PXA3xx
- select FB
- select FB_PXA
-
-config MACH_SAAR
- bool "PXA930 Handheld Platform (aka SAAR)"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA930
- select CPU_PXA935
- select PXA3xx
- select FB
- select FB_PXA
-
-comment "Third Party Dev Platforms (sorted by vendor name)"
-
-config ARCH_PXA_IDP
- bool "Accelent Xscale IDP"
- depends on UNUSED_BOARD_FILES
- select PXA25x
-
-config ARCH_VIPER
- bool "Arcom/Eurotech VIPER SBC"
- depends on UNUSED_BOARD_FILES
- select ARCOM_PCMCIA
- select I2C_GPIO if I2C=y
- select ISA
- select PXA25x
-
-config MACH_ARCOM_ZEUS
- bool "Arcom/Eurotech ZEUS SBC"
- depends on UNUSED_BOARD_FILES
- select ARCOM_PCMCIA
- select ISA
- select PXA27x
-
-config MACH_BALLOON3
- bool "Balloon 3 board"
- depends on UNUSED_BOARD_FILES
- select IWMMXT
- select PXA27x
-
-config MACH_CSB726
- bool "Enable Cogent CSB726 System On a Module"
- depends on UNUSED_BOARD_FILES
- select IWMMXT
- select PXA27x
- help
- Say Y here if you intend to run this kernel on a Cogent
- CSB726 System On Module.
-
-config CSB726_CSB701
- bool "Enable support for CSB701 baseboard"
- depends on UNUSED_BOARD_FILES
- depends on MACH_CSB726
-
-config MACH_CM_X300
- bool "CompuLab CM-X300 modules"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA300
- select CPU_PXA310
- select PXA3xx
-
-config MACH_CAPC7117
- bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA320
- select PXA3xx
+comment "Legacy board files"
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
@@ -185,307 +75,6 @@ config GUMSTIX_AM300EPD
endchoice
-config MACH_XCEP
- bool "Iskratel Electronics XCEP"
- depends on UNUSED_BOARD_FILES
- select MTD
- select MTD_CFI
- select MTD_CFI_INTELEXT
- select MTD_PHYSMAP
- select PXA25x
- help
- PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
- Tuned for usage in Libera instruments for particle accelerators.
-
-config TRIZEPS_PXA
- bool "PXA based Keith und Koep Trizeps DIMM-Modules"
- depends on UNUSED_BOARD_FILES
-
-config MACH_TRIZEPS4
- bool "Keith und Koep Trizeps4 DIMM-Module"
- depends on TRIZEPS_PXA
- select PXA27x
- select TRIZEPS_PCMCIA
-
-config MACH_TRIZEPS4WL
- bool "Keith und Koep Trizeps4-WL DIMM-Module"
- depends on TRIZEPS_PXA
- select MACH_TRIZEPS4
- select PXA27x
- select TRIZEPS_PCMCIA
-
-choice
- prompt "Select base board for Trizeps module"
- depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
- bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
- bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
- bool "another Board"
-
-endchoice
-
-config ARCOM_PCMCIA
- bool
- help
- Generic option for Arcom Viper/Zeus PCMCIA
-
-config TRIZEPS_PCMCIA
- bool
- help
- Enable PCMCIA support for Trizeps modules
-
-config MACH_LOGICPD_PXA270
- bool "LogicPD PXA270 Card Engine Development Platform"
- depends on UNUSED_BOARD_FILES
- select PXA27x
-
-config MACH_PCM027
- bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
- depends on UNUSED_BOARD_FILES
- select IWMMXT
- select PXA27x
-
-config MACH_PCM990_BASEBOARD
- bool "PHYTEC PCM-990 development board"
- depends on UNUSED_BOARD_FILES
- depends on MACH_PCM027
-
-choice
- prompt "display on pcm990"
- depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
- bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
- bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
- bool "no display"
-
-endchoice
-
-config MACH_COLIBRI
- bool "Toradex Colibri PXA270"
- depends on UNUSED_BOARD_FILES
- select PXA27x
-
-config MACH_COLIBRI_PXA270_INCOME
- bool "Income s.r.o. PXA270 SBC"
- depends on UNUSED_BOARD_FILES
- depends on MACH_COLIBRI
- select PXA27x
-
-config MACH_COLIBRI300
- bool "Toradex Colibri PXA300/310"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA300
- select CPU_PXA310
- select PXA3xx
-
-config MACH_COLIBRI320
- bool "Toradex Colibri PXA320"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA320
- select PXA3xx
-
-config MACH_COLIBRI_EVALBOARD
- bool "Toradex Colibri Evaluation Carrier Board support"
- depends on UNUSED_BOARD_FILES
- depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
-
-config MACH_VPAC270
- bool "Voipac PXA270"
- depends on UNUSED_BOARD_FILES
- select HAVE_PATA_PLATFORM
- select PXA27x
- help
- PXA270 based Single Board Computer.
-
-comment "End-user Products (sorted by vendor name)"
-
-config MACH_H4700
- bool "HP iPAQ hx4700"
- depends on UNUSED_BOARD_FILES
- select IWMMXT
- select PXA27x
-
-config MACH_H5000
- bool "HP iPAQ h5000"
- depends on UNUSED_BOARD_FILES
- select PXA25x
-
-config MACH_HIMALAYA
- bool "HTC Himalaya Support"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA26x
-
-config MACH_MAGICIAN
- bool "Enable HTC Magician Support"
- depends on UNUSED_BOARD_FILES
- select IWMMXT
- select PXA27x
-
-config MACH_MIOA701
- bool "Mitac Mio A701 Support"
- depends on UNUSED_BOARD_FILES
- select IWMMXT
- select PXA27x
- help
- Say Y here if you intend to run this kernel on a
- MIO A701. Currently there is only basic support
- for this PDA.
-
-config PXA_EZX
- bool "Motorola EZX Platform"
- depends on UNUSED_BOARD_FILES
- select IWMMXT
- select PXA27x
-
-config MACH_EZX_A780
- bool "Motorola EZX A780"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_E680
- bool "Motorola EZX E680"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_A1200
- bool "Motorola EZX A1200"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_A910
- bool "Motorola EZX A910"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_E6
- bool "Motorola EZX E6"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_E2
- bool "Motorola EZX E2"
- default y
- depends on PXA_EZX
-
-config MACH_MP900C
- bool "Nec Mobilepro 900/c"
- depends on UNUSED_BOARD_FILES
- select PXA25x
-
-config ARCH_PXA_PALM
- bool "PXA based Palm PDAs"
- depends on UNUSED_BOARD_FILES
-
-config MACH_PALM27X
- bool
-
-config MACH_PALMTE2
- bool "Palm Tungsten|E2"
- depends on UNUSED_BOARD_FILES
- default y
- depends on ARCH_PXA_PALM
- select PXA25x
- help
- Say Y here if you intend to run this kernel on a Palm Tungsten|E2
- handheld computer.
-
-config MACH_PALMTC
- bool "Palm Tungsten|C"
- default y
- depends on ARCH_PXA_PALM
- select PXA25x
- help
- Say Y here if you intend to run this kernel on a Palm Tungsten|C
- handheld computer.
-
-config MACH_PALMT5
- bool "Palm Tungsten|T5"
- depends on UNUSED_BOARD_FILES
- default y
- depends on ARCH_PXA_PALM
- select IWMMXT
- select MACH_PALM27X
- select PXA27x
- help
- Say Y here if you intend to run this kernel on a Palm Tungsten|T5
- handheld computer.
-
-config MACH_PALMTX
- bool "Palm T|X"
- depends on UNUSED_BOARD_FILES
- default y
- depends on ARCH_PXA_PALM
- select IWMMXT
- select MACH_PALM27X
- select PXA27x
- help
- Say Y here if you intend to run this kernel on a Palm T|X
- handheld computer.
-
-config MACH_PALMZ72
- bool "Palm Zire 72"
- depends on UNUSED_BOARD_FILES
- default y
- depends on ARCH_PXA_PALM
- select IWMMXT
- select MACH_PALM27X
- select PXA27x
- help
- Say Y here if you intend to run this kernel on Palm Zire 72
- handheld computer.
-
-config MACH_PALMLD
- bool "Palm LifeDrive"
- depends on UNUSED_BOARD_FILES
- default y
- depends on ARCH_PXA_PALM
- select IWMMXT
- select MACH_PALM27X
- select PXA27x
- help
- Say Y here if you intend to run this kernel on a Palm LifeDrive
- handheld computer.
-
-config PALM_TREO
- bool
- depends on ARCH_PXA_PALM
-
-config MACH_CENTRO
- bool "Palm Centro 685 (GSM)"
- depends on UNUSED_BOARD_FILES
- default y
- depends on ARCH_PXA_PALM
- select IWMMXT
- select MACH_PALM27X
- select PALM_TREO
- select PXA27x
- help
- Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
- smartphone.
-
-config MACH_TREO680
- bool "Palm Treo 680"
- depends on UNUSED_BOARD_FILES
- default y
- depends on ARCH_PXA_PALM
- select IWMMXT
- select MACH_PALM27X
- select PALM_TREO
- select PXA27x
- help
- Say Y here if you intend to run this kernel on Palm Treo 680
- smartphone.
-
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
select SHARP_PARAM
@@ -505,34 +94,6 @@ config PXA_SHARPSL_DETECT_MACH_ID
the Zaurus machine ID at run-time. For latest kexec-based
boot loader, this is not necessary.
-config MACH_POODLE
- bool "Enable Sharp SL-5600 (Poodle) Support"
- depends on PXA_SHARPSL
- depends on UNUSED_BOARD_FILES
- select PXA25x
- select SHARP_LOCOMO
-
-config MACH_CORGI
- bool "Enable Sharp SL-C700 (Corgi) Support"
- depends on PXA_SHARPSL
- depends on UNUSED_BOARD_FILES
- select PXA25x
- select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
- bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends on PXA_SHARPSL
- depends on UNUSED_BOARD_FILES
- select PXA25x
- select PXA_SHARP_C7xx
-
-config MACH_HUSKY
- bool "Enable Sharp SL-C760 (Husky) Support"
- depends on PXA_SHARPSL
- depends on UNUSED_BOARD_FILES
- select PXA25x
- select PXA_SHARP_C7xx
-
config MACH_AKITA
bool "Enable Sharp SL-1000 (Akita) Support"
depends on PXA_SHARPSL
@@ -554,98 +115,7 @@ config MACH_BORZOI
select PXA27x
select PXA_SHARP_Cxx00
-config MACH_TOSA
- bool "Enable Sharp SL-6000x (Tosa) Support"
- depends on UNUSED_BOARD_FILES
- depends on PXA_SHARPSL
- select PXA25x
-
-config TOSA_BT
- tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
- depends on MACH_TOSA && NET
- select RFKILL
- help
- This is a simple driver that is able to control
- the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
- bool "Tosa keyboard: use extended keycodes"
- depends on MACH_TOSA
- help
- Say Y here to enable the tosa keyboard driver to generate extended
- (>= 127) keycodes. Be aware, that they can't be correctly interpreted
- by either console keyboard driver or by Kdrive keybd driver.
-
- Say Y only if you know, what you are doing!
-
-config MACH_ICONTROL
- bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
- depends on UNUSED_BOARD_FILES
- select CPU_PXA320
- select PXA3xx
-
-config ARCH_PXA_ESERIES
- bool "PXA based Toshiba e-series PDAs"
- depends on UNUSED_BOARD_FILES
- select FB_W100
- select FB
- select PXA25x
-
-config MACH_E330
- bool "Toshiba e330"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e330 family PDA.
-
-config MACH_E350
- bool "Toshiba e350"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e350 family PDA.
-
-config MACH_E740
- bool "Toshiba e740"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e740 family PDA.
-
-config MACH_E750
- bool "Toshiba e750"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e750 family PDA.
-
-config MACH_E400
- bool "Toshiba e400"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e400 family PDA.
-
-config MACH_E800
- bool "Toshiba e800"
- default y
- depends on ARCH_PXA_ESERIES
- help
- Say Y here if you intend to run this kernel on a Toshiba
- e800 family PDA.
-
-config MACH_ZIPIT2
- bool "Zipit Z2 Handheld"
- depends on UNUSED_BOARD_FILES
- select PXA27x
-
endif # ATAGS
-endmenu
config PXA25x
bool
@@ -659,12 +129,6 @@ config PXA27x
help
Select code specific to PXA27x variants
-config CPU_PXA26x
- bool
- select PXA25x
- help
- Select code specific to PXA26x (codename Dalhart)
-
config PXA3xx
bool
select CPU_XSC3
@@ -680,7 +144,6 @@ config CPU_PXA300
config CPU_PXA310
bool
select CPU_PXA300
- select PXA310_ULPI if USB_ULPI
help
PXA310 (codename Monahans-LV)
@@ -690,24 +153,6 @@ config CPU_PXA320
help
PXA320 (codename Monahans-P)
-config CPU_PXA930
- bool
- select PXA3xx
- help
- PXA930 (codename Tavor-P)
-
-config CPU_PXA935
- bool
- select CPU_PXA930
- help
- PXA935 (codename Tavor-P65)
-
-config PXA_SHARP_C7xx
- bool
- select SHARPSL_PM
- help
- Enable support for all Sharp C7xx models
-
config PXA_SHARP_Cxx00
bool
select SHARPSL_PM
@@ -726,16 +171,4 @@ config SHARPSL_PM_MAX1111
select SPI
select SPI_MASTER
-config PXA310_ULPI
- bool
-
-config PXA_SYSTEMS_CPLDS
- tristate "Motherboard cplds"
- default ARCH_LUBBOCK || MACH_MAINSTONE
- help
- This driver supports the Lubbock and Mainstone multifunction chip
- found on the pxa25x development platform system (Lubbock) and pxa27x
- development platform system (Mainstone). This IO board supports the
- interrupts handling, ethernet controller, flash chips, etc ...
-
endif