1 files changed, 0 insertions, 432 deletions
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
deleted file mode 100644
index 77fe2e367324..000000000000
--- a/arch/arm/mach-pxa/palmz72.c
+++ /dev/null
@@ -1,432 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Zire72
- *
- * Authors:
- *	Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
- *	Sergey Lapin <slapin@ossfans.org>
- *	Alex Osborne <bobofdoom@gmail.com>
- *	Jan Herman <2hp@seznam.cz>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/platform_data/i2c-gpio.h>
-#include <linux/gpio/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/suspend.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <mach/audio.h>
-#include "palmz72.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "pm.h"
-#include <linux/platform_data/media/camera-pxa.h>
-
-#include <media/soc_camera.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmz72_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO115_GPIO,	/* SD RO */
-	GPIO98_GPIO,	/* SD power */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO113_AC97_nRESET,
-
-	/* IrDA */
-	GPIO49_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb pullup */
-
-	/* Matrix keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	GPIO20_GPIO,	/* bl power */
-	GPIO21_GPIO,	/* LCD border switch */
-	GPIO22_GPIO,	/* LCD border color */
-	GPIO96_GPIO,	/* lcd power */
-
-	/* PXA Camera */
-	GPIO81_CIF_DD_0,
-	GPIO48_CIF_DD_5,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO93_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-
-	GPIO56_GPIO,	/* OV9640 Powerdown */
-	GPIO57_GPIO,	/* OV9640 Reset */
-	GPIO91_GPIO,	/* OV9640 Power */
-
-	/* I2C */
-	GPIO117_GPIO,	/* I2C_SCL */
-	GPIO118_GPIO,	/* I2C_SDA */
-
-	/* Misc. */
-	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
-	GPIO88_GPIO,				/* green led */
-	GPIO27_GPIO,				/* WM9712 IRQ */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmz72_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data almz72_matrix_keymap_data = {
-	.keymap			= palmz72_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmz72_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &almz72_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmz72_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmz72_keypad_platform_data);
-}
-#else
-static inline void palmz72_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "palmz72:green:led",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_PALMZ72_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmz72_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmz72_leds_init(void)
-{
-	platform_device_register(&palmz72_leds);
-}
-#else
-static inline void palmz72_leds_init(void) {}
-#endif
-
-#ifdef CONFIG_PM
-
-/* We have some black magic here
- * PalmOS ROM on recover expects special struct physical address
- * to be transferred via PSPR. Using this struct PalmOS restores
- * its state after sleep. As for Linux, we need to setup it the
- * same way. More than that, PalmOS ROM changes some values in memory.
- * For now only one location is found, which needs special treatment.
- * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
- * for reading backtraces for me :)
- */
-
-#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
-
-static struct palmz72_resume_info palmz72_resume_info = {
-	.magic0 = 0xb4e6,
-	.magic1 = 1,
-
-	/* reset state, MMU off etc */
-	.arm_control = 0,
-	.aux_control = 0,
-	.ttb = 0,
-	.domain_access = 0,
-	.process_id = 0,
-};
-
-static unsigned long store_ptr;
-
-/* syscore_ops for Palm Zire 72 PM */
-
-static int palmz72_pm_suspend(void)
-{
-	/* setup the resume_info struct for the original bootloader */
-	palmz72_resume_info.resume_addr = (u32) cpu_resume;
-
-	/* Storing memory touched by ROM */
-	store_ptr = *PALMZ72_SAVE_DWORD;
-
-	/* Setting PSPR to a proper value */
-	PSPR = __pa_symbol(&palmz72_resume_info);
-
-	return 0;
-}
-
-static void palmz72_pm_resume(void)
-{
-	*PALMZ72_SAVE_DWORD = store_ptr;
-}
-
-static struct syscore_ops palmz72_pm_syscore_ops = {
-	.suspend = palmz72_pm_suspend,
-	.resume = palmz72_pm_resume,
-};
-
-static int __init palmz72_pm_init(void)
-{
-	if (machine_is_palmz72()) {
-		register_syscore_ops(&palmz72_pm_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(palmz72_pm_init);
-#endif
-
-/******************************************************************************
- * SoC Camera
- ******************************************************************************/
-#if defined(CONFIG_SOC_CAMERA_OV9640) || \
-	defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
-static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
-	.flags		= PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-			PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz	= 2600,
-};
-
-/* Board I2C devices. */
-static struct i2c_board_info palmz72_i2c_device[] = {
-	{
-		I2C_BOARD_INFO("ov9640", 0x30),
-	}
-};
-
-static int palmz72_camera_power(struct device *dev, int power)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
-	mdelay(50);
-	return 0;
-}
-
-static int palmz72_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
-	mdelay(50);
-	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
-	mdelay(50);
-	return 0;
-}
-
-static struct soc_camera_link palmz72_iclink = {
-	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
-	.board_info	= &palmz72_i2c_device[0],
-	.i2c_adapter_id	= 0,
-	.module_name	= "ov96xx",
-	.power		= &palmz72_camera_power,
-	.reset		= &palmz72_camera_reset,
-	.flags		= SOCAM_DATAWIDTH_8,
-};
-
-static struct gpiod_lookup_table palmz72_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.0",
-	.table		= {
-		GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("gpio-pxa", 117, NULL, 1,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
-	.udelay		= 10,
-	.timeout	= 100,
-};
-
-static struct platform_device palmz72_i2c_bus_device = {
-	.name		= "i2c-gpio",
-	.id		= 0, /* we use this as a replacement for i2c-pxa */
-	.dev		= {
-		.platform_data	= &palmz72_i2c_bus_data,
-	}
-};
-
-static struct platform_device palmz72_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmz72_iclink,
-	},
-};
-
-/* Here we request the camera GPIOs and configure them. We power up the camera
- * module, deassert the reset pin, but put it into powerdown (low to no power
- * consumption) mode. This allows us to later bring the module up fast. */
-static struct gpio palmz72_camera_gpios[] = {
-	{ GPIO_NR_PALMZ72_CAM_POWER,	GPIOF_INIT_HIGH,"Camera DVDD" },
-	{ GPIO_NR_PALMZ72_CAM_RESET,	GPIOF_INIT_LOW,	"Camera RESET" },
-	{ GPIO_NR_PALMZ72_CAM_PWDN,	GPIOF_INIT_LOW,	"Camera PWDN" },
-};
-
-static inline void __init palmz72_cam_gpio_init(void)
-{
-	int ret;
-
-	ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
-	if (!ret)
-		gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
-	else
-		printk(KERN_ERR "Camera GPIO init failed!\n");
-
-	return;
-}
-
-static void __init palmz72_camera_init(void)
-{
-	palmz72_cam_gpio_init();
-	pxa_set_camera_info(&palmz72_pxacamera_platform_data);
-	gpiod_add_lookup_table(&palmz72_i2c_gpiod_table);
-	platform_device_register(&palmz72_i2c_bus_device);
-	platform_device_register(&palmz72_camera);
-}
-#else
-static inline void palmz72_camera_init(void) {}
-#endif
-
-static struct gpiod_lookup_table palmz72_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_POWER_N,
-			    "power", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmz72_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmz72_mci_gpio_table);
-	palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
-			GPIO_NR_PALMZ72_USB_PULLUP, 0);
-	palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
-	palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
-			-1, 113);
-	palm27x_pwm_init(-1, -1);
-	palm27x_power_init(-1, -1);
-	palm27x_pmic_init();
-	palmz72_kpc_init();
-	palmz72_leds_init();
-	palmz72_camera_init();
-}
-
-MACHINE_START(PALMZ72, "Palm Zire72")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmz72_init,
-	.restart	= pxa_restart,
-MACHINE_END