diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx/common.c')
| -rw-r--r-- | arch/arm/mach-s3c64xx/common.c | 439 |
1 files changed, 0 insertions, 439 deletions
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c deleted file mode 100644 index 13e91074308a..000000000000 --- a/arch/arm/mach-s3c64xx/common.c +++ /dev/null @@ -1,439 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2011 Samsung Electronics Co., Ltd. -// http://www.samsung.com -// -// Copyright 2008 Openmoko, Inc. -// Copyright 2008 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// http://armlinux.simtec.co.uk/ -// -// Common Codes for S3C64XX machines - -/* - * NOTE: Code in this file is not used when booting with Device Tree support. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/platform_device.h> -#include <linux/reboot.h> -#include <linux/io.h> -#include <linux/dma-mapping.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <linux/irqchip/arm-vic.h> -#include <clocksource/samsung_pwm.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/system_misc.h> - -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/hardware.h> -#include <mach/regs-gpio.h> -#include <mach/gpio-samsung.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/pm.h> -#include <plat/gpio-cfg.h> -#include <plat/pwm-core.h> -#include <plat/regs-irqtype.h> - -#include "common.h" -#include "irq-uart.h" -#include "watchdog-reset.h" - -/* External clock frequency */ -static unsigned long xtal_f __ro_after_init = 12000000; -static unsigned long xusbxti_f __ro_after_init = 48000000; - -void __init s3c64xx_set_xtal_freq(unsigned long freq) -{ - xtal_f = freq; -} - -void __init s3c64xx_set_xusbxti_freq(unsigned long freq) -{ - xusbxti_f = freq; -} - -/* uart registration process */ - -static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); -} - -/* table of supported CPUs */ - -static const char name_s3c6400[] = "S3C6400"; -static const char name_s3c6410[] = "S3C6410"; - -static struct cpu_table cpu_ids[] __initdata = { - { - .idcode = S3C6400_CPU_ID, - .idmask = S3C64XX_CPU_MASK, - .map_io = s3c6400_map_io, - .init_uarts = s3c64xx_init_uarts, - .init = s3c6400_init, - .name = name_s3c6400, - }, { - .idcode = S3C6410_CPU_ID, - .idmask = S3C64XX_CPU_MASK, - .map_io = s3c6410_map_io, - .init_uarts = s3c64xx_init_uarts, - .init = s3c6410_init, - .name = name_s3c6410, - }, -}; - -/* minimal IO mapping */ - -/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */ -#define UART_OFFS (S3C_PA_UART & 0xfffff) - -static struct map_desc s3c_iodesc[] __initdata = { - { - .virtual = (unsigned long)S3C_VA_SYS, - .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_MEM, - .pfn = __phys_to_pfn(S3C64XX_PA_SROM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS), - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S3C64XX_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S3C64XX_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_TIMER, - .pfn = __phys_to_pfn(S3C_PA_TIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C64XX_VA_GPIO, - .pfn = __phys_to_pfn(S3C64XX_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C64XX_VA_MODEM, - .pfn = __phys_to_pfn(S3C64XX_PA_MODEM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_WATCHDOG, - .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_USB_HSPHY, - .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY), - .length = SZ_1K, - .type = MT_DEVICE, - }, -}; - -static struct bus_type s3c64xx_subsys = { - .name = "s3c64xx-core", - .dev_name = "s3c64xx-core", -}; - -static struct device s3c64xx_dev = { - .bus = &s3c64xx_subsys, -}; - -static struct samsung_pwm_variant s3c64xx_pwm_variant = { - .bits = 32, - .div_base = 0, - .has_tint_cstat = true, - .tclk_mask = (1 << 7) | (1 << 6) | (1 << 5), -}; - -void __init samsung_set_timer_source(unsigned int event, unsigned int source) -{ - s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; - s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source)); -} - -void __init samsung_timer_init(void) -{ - unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { - IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC, - IRQ_TIMER3_VIC, IRQ_TIMER4_VIC, - }; - - samsung_pwm_clocksource_init(S3C_VA_TIMER, - timer_irqs, &s3c64xx_pwm_variant); -} - -/* read cpu identification code */ - -void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) -{ - /* initialise the io descriptors we need for initialisation */ - iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); - iotable_init(mach_desc, size); - - /* detect cpu id */ - s3c64xx_init_cpu(); - - s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); - - samsung_pwm_set_platdata(&s3c64xx_pwm_variant); -} - -static __init int s3c64xx_dev_init(void) -{ - /* Not applicable when using DT. */ - if (of_have_populated_dt() || !soc_is_s3c64xx()) - return 0; - - subsys_system_register(&s3c64xx_subsys, NULL); - return device_register(&s3c64xx_dev); -} -core_initcall(s3c64xx_dev_init); - -/* - * setup the sources the vic should advertise resume - * for, even though it is not doing the wake - * (set_irq_wake needs to be valid) - */ -#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE)) -#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \ - 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \ - 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \ - 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \ - 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE)) - -void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) -{ - /* - * FIXME: there is no better place to put this at the moment - * (s3c64xx_clk_init needs ioremap and must happen before init_time - * samsung_wdt_reset_init needs clocks) - */ - s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS); - samsung_wdt_reset_init(S3C_VA_WATCHDOG); - - printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); - - /* initialise the pair of VICs */ - vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME); - vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME); -} - -#define eint_offset(irq) ((irq) - IRQ_EINT(0)) -#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq))) - -static inline void s3c_irq_eint_mask(struct irq_data *data) -{ - u32 mask; - - mask = __raw_readl(S3C64XX_EINT0MASK); - mask |= (u32)data->chip_data; - __raw_writel(mask, S3C64XX_EINT0MASK); -} - -static void s3c_irq_eint_unmask(struct irq_data *data) -{ - u32 mask; - - mask = __raw_readl(S3C64XX_EINT0MASK); - mask &= ~((u32)data->chip_data); - __raw_writel(mask, S3C64XX_EINT0MASK); -} - -static inline void s3c_irq_eint_ack(struct irq_data *data) -{ - __raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND); -} - -static void s3c_irq_eint_maskack(struct irq_data *data) -{ - /* compiler should in-line these */ - s3c_irq_eint_mask(data); - s3c_irq_eint_ack(data); -} - -static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type) -{ - int offs = eint_offset(data->irq); - int pin, pin_val; - int shift; - u32 ctrl, mask; - u32 newvalue = 0; - void __iomem *reg; - - if (offs > 27) - return -EINVAL; - - if (offs <= 15) - reg = S3C64XX_EINT0CON0; - else - reg = S3C64XX_EINT0CON1; - - switch (type) { - case IRQ_TYPE_NONE: - printk(KERN_WARNING "No edge setting!\n"); - break; - - case IRQ_TYPE_EDGE_RISING: - newvalue = S3C2410_EXTINT_RISEEDGE; - break; - - case IRQ_TYPE_EDGE_FALLING: - newvalue = S3C2410_EXTINT_FALLEDGE; - break; - - case IRQ_TYPE_EDGE_BOTH: - newvalue = S3C2410_EXTINT_BOTHEDGE; - break; - - case IRQ_TYPE_LEVEL_LOW: - newvalue = S3C2410_EXTINT_LOWLEV; - break; - - case IRQ_TYPE_LEVEL_HIGH: - newvalue = S3C2410_EXTINT_HILEV; - break; - - default: - printk(KERN_ERR "No such irq type %d", type); - return -1; - } - - if (offs <= 15) - shift = (offs / 2) * 4; - else - shift = ((offs - 16) / 2) * 4; - mask = 0x7 << shift; - - ctrl = __raw_readl(reg); - ctrl &= ~mask; - ctrl |= newvalue << shift; - __raw_writel(ctrl, reg); - - /* set the GPIO pin appropriately */ - - if (offs < 16) { - pin = S3C64XX_GPN(offs); - pin_val = S3C_GPIO_SFN(2); - } else if (offs < 23) { - pin = S3C64XX_GPL(offs + 8 - 16); - pin_val = S3C_GPIO_SFN(3); - } else { - pin = S3C64XX_GPM(offs - 23); - pin_val = S3C_GPIO_SFN(3); - } - - s3c_gpio_cfgpin(pin, pin_val); - - return 0; -} - -static struct irq_chip s3c_irq_eint = { - .name = "s3c-eint", - .irq_mask = s3c_irq_eint_mask, - .irq_unmask = s3c_irq_eint_unmask, - .irq_mask_ack = s3c_irq_eint_maskack, - .irq_ack = s3c_irq_eint_ack, - .irq_set_type = s3c_irq_eint_set_type, - .irq_set_wake = s3c_irqext_wake, -}; - -/* s3c_irq_demux_eint - * - * This function demuxes the IRQ from the group0 external interrupts, - * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into - * the specific handlers s3c_irq_demux_eintX_Y. - */ -static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end) -{ - u32 status = __raw_readl(S3C64XX_EINT0PEND); - u32 mask = __raw_readl(S3C64XX_EINT0MASK); - unsigned int irq; - - status &= ~mask; - status >>= start; - status &= (1 << (end - start + 1)) - 1; - - for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { - if (status & 1) - generic_handle_irq(irq); - - status >>= 1; - } -} - -static void s3c_irq_demux_eint0_3(struct irq_desc *desc) -{ - s3c_irq_demux_eint(0, 3); -} - -static void s3c_irq_demux_eint4_11(struct irq_desc *desc) -{ - s3c_irq_demux_eint(4, 11); -} - -static void s3c_irq_demux_eint12_19(struct irq_desc *desc) -{ - s3c_irq_demux_eint(12, 19); -} - -static void s3c_irq_demux_eint20_27(struct irq_desc *desc) -{ - s3c_irq_demux_eint(20, 27); -} - -static int __init s3c64xx_init_irq_eint(void) -{ - int irq; - - /* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */ - if (of_have_populated_dt() || !soc_is_s3c64xx()) - return -ENODEV; - - for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { - irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq); - irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq)); - irq_clear_status_flags(irq, IRQ_NOREQUEST); - } - - irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3); - irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11); - irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19); - irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27); - - return 0; -} -arch_initcall(s3c64xx_init_irq_eint); - -void s3c64xx_restart(enum reboot_mode mode, const char *cmd) -{ - if (mode != REBOOT_SOFT) - samsung_wdt_reset(); - - /* if all else fails, or mode was for soft, jump to 0 */ - soft_restart(0); -} |