diff options
Diffstat (limited to 'arch/arm/mach-s3c64xx/include/mach/pm-core.h')
-rw-r--r-- | arch/arm/mach-s3c64xx/include/mach/pm-core.h | 124 |
1 files changed, 0 insertions, 124 deletions
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h deleted file mode 100644 index bbf79ed28583..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ /dev/null @@ -1,124 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c - */ - -#ifndef __MACH_S3C64XX_PM_CORE_H -#define __MACH_S3C64XX_PM_CORE_H __FILE__ - -#include <linux/serial_s3c.h> -#include <linux/delay.h> - -#include <mach/regs-gpio.h> -#include <mach/regs-clock.h> -#include <mach/map.h> - -static inline void s3c_pm_debug_init_uart(void) -{ - u32 tmp = __raw_readl(S3C_PCLK_GATE); - - /* As a note, since the S3C64XX UARTs generally have multiple - * clock sources, we simply enable PCLK at the moment and hope - * that the resume settings for the UART are suitable for the - * use with PCLK. - */ - - tmp |= S3C_CLKCON_PCLK_UART0; - tmp |= S3C_CLKCON_PCLK_UART1; - tmp |= S3C_CLKCON_PCLK_UART2; - tmp |= S3C_CLKCON_PCLK_UART3; - - __raw_writel(tmp, S3C_PCLK_GATE); - udelay(10); -} - -static inline void s3c_pm_arch_prepare_irqs(void) -{ - /* VIC should have already been taken care of */ - - /* clear any pending EINT0 interrupts */ - __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND); -} - -static inline void s3c_pm_arch_stop_clocks(void) -{ -} - -static inline void s3c_pm_arch_show_resume_irqs(void) -{ -} - -/* make these defines, we currently do not have any need to change - * the IRQ wake controls depending on the CPU we are running on */ -#ifdef CONFIG_PM_SLEEP -#define s3c_irqwake_eintallow ((1 << 28) - 1) -#define s3c_irqwake_intallow (~0) -#else -#define s3c_irqwake_eintallow 0 -#define s3c_irqwake_intallow 0 -#endif - -static inline void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save) -{ - u32 ucon = __raw_readl(regs + S3C2410_UCON); - u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; - u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; - u32 new_ucon; - u32 delta; - - /* S3C64XX UART blocks only support level interrupts, so ensure that - * when we restore unused UART blocks we force the level interrupt - * settigs. */ - save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; - - /* We have a constraint on changing the clock type of the UART - * between UCLKx and PCLK, so ensure that when we restore UCON - * that the CLK field is correctly modified if the bootloader - * has changed anything. - */ - if (ucon_clk != save_clk) { - new_ucon = save->ucon; - delta = ucon_clk ^ save_clk; - - /* change from UCLKx => wrong PCLK, - * either UCLK can be tested for by a bit-test - * with UCLK0 */ - if (ucon_clk & S3C6400_UCON_UCLK0 && - !(save_clk & S3C6400_UCON_UCLK0) && - delta & S3C6400_UCON_PCLK2) { - new_ucon &= ~S3C6400_UCON_UCLK0; - } else if (delta == S3C6400_UCON_PCLK2) { - /* as an precaution, don't change from - * PCLK2 => PCLK or vice-versa */ - new_ucon ^= S3C6400_UCON_PCLK2; - } - - S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", - ucon, new_ucon, save->ucon); - save->ucon = new_ucon; - } -} - -static inline void s3c_pm_restored_gpios(void) -{ - /* ensure sleep mode has been cleared from the system */ - - __raw_writel(0, S3C64XX_SLPEN); -} - -static inline void samsung_pm_saved_gpios(void) -{ - /* turn on the sleep mode and keep it there, as it seems that during - * suspend the xCON registers get re-set and thus you can end up with - * problems between going to sleep and resuming. - */ - - __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN); -} -#endif /* __MACH_S3C64XX_PM_CORE_H */ |