diff options
Diffstat (limited to 'arch/arm/mach-sa1100/collie.c')
| -rw-r--r-- | arch/arm/mach-sa1100/collie.c | 70 |
1 files changed, 31 insertions, 39 deletions
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 3cc2b71e16f0..466d755d5702 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -30,6 +30,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/power/gpio-charger.h> #include <video/sa1100fb.h> @@ -43,7 +44,6 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <linux/platform_data/irda-sa11x0.h> #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> @@ -97,50 +97,46 @@ static struct mcp_plat_data collie_mcp_data = { .codec_pdata = &collie_ucb1x00_data, }; -static int collie_ir_startup(struct device *dev) -{ - int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA"); - if (rc) - return rc; - rc = gpio_direction_output(COLLIE_GPIO_IR_ON, 1); - - if (!rc) - return 0; - - gpio_free(COLLIE_GPIO_IR_ON); - return rc; -} - -static void collie_ir_shutdown(struct device *dev) -{ - gpio_free(COLLIE_GPIO_IR_ON); -} - -static int collie_ir_set_power(struct device *dev, unsigned int state) -{ - gpio_set_value(COLLIE_GPIO_IR_ON, !state); - return 0; -} - -static struct irda_platform_data collie_ir_data = { - .startup = collie_ir_startup, - .shutdown = collie_ir_shutdown, - .set_power = collie_ir_set_power, +/* Battery management GPIOs */ +static struct gpiod_lookup_table collie_battery_gpiod_table = { + /* the MCP codec mcp0 has the ucb1x00 as attached device */ + .dev_id = "ucb1x00", + .table = { + /* This is found on the main GPIO on the SA1100 */ + GPIO_LOOKUP("gpio", COLLIE_GPIO_CO, + "main battery full", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio", COLLIE_GPIO_MAIN_BAT_LOW, + "main battery low", GPIO_ACTIVE_HIGH), + /* + * This is GPIO 0 on the Scoop expander, which is registered + * from common/scoop.c with this gpio chip label. + */ + GPIO_LOOKUP("sharp-scoop", 0, + "main charge on", GPIO_ACTIVE_HIGH), + { }, + }, }; /* * Collie AC IN */ +static struct gpiod_lookup_table collie_power_gpiod_table = { + .dev_id = "gpio-charger", + .table = { + GPIO_LOOKUP("gpio", COLLIE_GPIO_AC_IN, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static char *collie_ac_supplied_to[] = { "main-battery", "backup-battery", }; - static struct gpio_charger_platform_data collie_power_data = { .name = "charger", .type = POWER_SUPPLY_TYPE_MAINS, - .gpio = COLLIE_GPIO_AC_IN, .supplied_to = collie_ac_supplied_to, .num_supplicants = ARRAY_SIZE(collie_ac_supplied_to), }; @@ -196,18 +192,12 @@ static int collie_uart_probe(struct locomo_dev *dev) return 0; } -static int collie_uart_remove(struct locomo_dev *dev) -{ - return 0; -} - static struct locomo_driver collie_uart_driver = { .drv = { .name = "collie_uart", }, .devid = LOCOMO_DEVID_UART, .probe = collie_uart_probe, - .remove = collie_uart_remove, }; static int __init collie_uart_init(void) @@ -386,6 +376,9 @@ static void __init collie_init(void) platform_scoop_config = &collie_pcmcia_config; + gpiod_add_lookup_table(&collie_power_gpiod_table); + gpiod_add_lookup_table(&collie_battery_gpiod_table); + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); @@ -395,7 +388,6 @@ static void __init collie_init(void) sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); sa11x0_register_mcp(&collie_mcp_data); - sa11x0_register_irda(&collie_ir_data); sharpsl_save_param(); } |