1 files changed, 0 insertions, 140 deletions
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
deleted file mode 100644
index 51eaeeaf3f10..000000000000
--- a/arch/arm/mach-sa1100/h3100.c
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for Compaq iPAQ H3100 handheld computer
- *
- * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
- * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <video/sa1100fb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <linux/platform_data/irda-sa11x0.h>
-
-#include <mach/h3xxx.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/*
- * helper for sa1100fb
- */
-static struct gpio h3100_lcd_gpio[] = {
-	{ H3100_GPIO_LCD_3V_ON, GPIOF_OUT_INIT_LOW, "LCD 3V" },
-	{ H3XXX_EGPIO_LCD_ON, GPIOF_OUT_INIT_LOW, "LCD ON" },
-};
-
-static bool h3100_lcd_request(void)
-{
-	static bool h3100_lcd_ok;
-	int rc;
-
-	if (h3100_lcd_ok)
-		return true;
-
-	rc = gpio_request_array(h3100_lcd_gpio, ARRAY_SIZE(h3100_lcd_gpio));
-	if (rc)
-		pr_err("%s: can't request GPIOs\n", __func__);
-	else
-		h3100_lcd_ok = true;
-
-	return h3100_lcd_ok;
-}
-
-static void h3100_lcd_power(int enable)
-{
-	if (!h3100_lcd_request())
-		return;
-
-	gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
-	gpio_set_value(H3XXX_EGPIO_LCD_ON, enable);
-}
-
-static struct sa1100fb_mach_info h3100_lcd_info = {
-	.pixclock	= 406977, 	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 26,		.vsync_len	= 41,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 4,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 1,
-	.cmap_inverse	= 1,
-
-	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-
-	.lcd_power = h3100_lcd_power,
-};
-
-static void __init h3100_map_io(void)
-{
-	h3xxx_map_io();
-
-	/* Older bootldrs put GPIO2-9 in alternate mode on the
-	   assumption that they are used for video */
-	GAFR &= ~0x000001fb;
-}
-
-/*
- * This turns the IRDA power on or off on the Compaq H3100
- */
-static struct gpio h3100_irda_gpio[] = {
-	{ H3100_GPIO_IR_ON,	GPIOF_OUT_INIT_LOW, "IrDA power" },
-	{ H3100_GPIO_IR_FSEL,	GPIOF_OUT_INIT_LOW, "IrDA fsel" },
-};
-
-static int h3100_irda_set_power(struct device *dev, unsigned int state)
-{
-	gpio_set_value(H3100_GPIO_IR_ON, state);
-	return 0;
-}
-
-static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static int h3100_irda_startup(struct device *dev)
-{
-	return gpio_request_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
-}
-
-static void h3100_irda_shutdown(struct device *dev)
-{
-	return gpio_free_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
-}
-
-static struct irda_platform_data h3100_irda_data = {
-	.set_power	= h3100_irda_set_power,
-	.set_speed	= h3100_irda_set_speed,
-	.startup	= h3100_irda_startup,
-	.shutdown	= h3100_irda_shutdown,
-};
-
-static void __init h3100_mach_init(void)
-{
-	h3xxx_mach_init();
-
-	sa11x0_register_pcmcia(-1, NULL);
-	sa11x0_register_lcd(&h3100_lcd_info);
-	sa11x0_register_irda(&h3100_irda_data);
-}
-
-MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.atag_offset	= 0x100,
-	.map_io		= h3100_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= h3100_mach_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
-