diff options
Diffstat (limited to 'arch/arm/mach-versatile/core.c')
| -rw-r--r-- | arch/arm/mach-versatile/core.c | 331 |
1 files changed, 0 insertions, 331 deletions
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c deleted file mode 100644 index 072ae192421c..000000000000 --- a/arch/arm/mach-versatile/core.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/core.c - * - * Copyright (C) 1999 - 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/of_platform.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/platform_data/video-clcd-versatile.h> -#include <linux/amba/mmci.h> -#include <linux/io.h> -#include <linux/mtd/physmap.h> -#include <linux/reboot.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/hardware.h> -#include <mach/platform.h> - -#include "core.h" - -static struct map_desc versatile_io_desc[] __initdata __maybe_unused = { - { - .virtual = IO_ADDRESS(VERSATILE_SYS_BASE), - .pfn = __phys_to_pfn(VERSATILE_SYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE), - .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE), - .length = SZ_4K * 9, - .type = MT_DEVICE - }, - { - .virtual = IO_ADDRESS(VERSATILE_IB2_BASE), - .pfn = __phys_to_pfn(VERSATILE_IB2_BASE), - .length = SZ_64M, - .type = MT_DEVICE - }, -}; - -void __init versatile_map_io(void) -{ - debug_ll_io_init(); - iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc)); -} - - -#define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET) - -static void versatile_flash_set_vpp(struct platform_device *pdev, int on) -{ - u32 val; - - val = __raw_readl(VERSATILE_FLASHCTRL); - if (on) - val |= VERSATILE_FLASHPROG_FLVPPEN; - else - val &= ~VERSATILE_FLASHPROG_FLVPPEN; - __raw_writel(val, VERSATILE_FLASHCTRL); -} - -static struct physmap_flash_data versatile_flash_data = { - .width = 4, - .set_vpp = versatile_flash_set_vpp, -}; - -static struct resource versatile_flash_resource = { - .start = VERSATILE_FLASH_BASE, - .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -struct platform_device versatile_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &versatile_flash_data, - }, - .num_resources = 1, - .resource = &versatile_flash_resource, -}; - -#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET) - -unsigned int mmc_status(struct device *dev) -{ - struct amba_device *adev = container_of(dev, struct amba_device, dev); - u32 mask; - - if (adev->res.start == VERSATILE_MMCI0_BASE) - mask = 1; - else - mask = 2; - - return readl(VERSATILE_SYSMCI) & mask; -} - -static struct mmci_platform_data mmc0_plat_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .status = mmc_status, - .gpio_wp = -1, - .gpio_cd = -1, -}; - -static struct mmci_platform_data mmc1_plat_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .status = mmc_status, - .gpio_wp = -1, - .gpio_cd = -1, -}; - -/* - * CLCD support. - */ -#define SYS_CLCD_MODE_MASK (3 << 0) -#define SYS_CLCD_MODE_888 (0 << 0) -#define SYS_CLCD_MODE_5551 (1 << 0) -#define SYS_CLCD_MODE_565_RLSB (2 << 0) -#define SYS_CLCD_MODE_565_BLSB (3 << 0) -#define SYS_CLCD_NLCDIOON (1 << 2) -#define SYS_CLCD_VDDPOSSWITCH (1 << 3) -#define SYS_CLCD_PWR3V5SWITCH (1 << 4) -#define SYS_CLCD_ID_MASK (0x1f << 8) -#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) -#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) -#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) -#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) -#define SYS_CLCD_ID_VGA (0x1f << 8) - -static bool is_sanyo_2_5_lcd; - -/* - * Disable all display connectors on the interface module. - */ -static void versatile_clcd_disable(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; - u32 val; - - val = readl(sys_clcd); - val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; - writel(val, sys_clcd); - - /* - * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off - */ - if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) { - void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); - unsigned long ctrl; - - ctrl = readl(versatile_ib2_ctrl); - ctrl &= ~0x01; - writel(ctrl, versatile_ib2_ctrl); - } -} - -/* - * Enable the relevant connector on the interface module. - */ -static void versatile_clcd_enable(struct clcd_fb *fb) -{ - struct fb_var_screeninfo *var = &fb->fb.var; - void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; - u32 val; - - val = readl(sys_clcd); - val &= ~SYS_CLCD_MODE_MASK; - - switch (var->green.length) { - case 5: - val |= SYS_CLCD_MODE_5551; - break; - case 6: - if (var->red.offset == 0) - val |= SYS_CLCD_MODE_565_RLSB; - else - val |= SYS_CLCD_MODE_565_BLSB; - break; - case 8: - val |= SYS_CLCD_MODE_888; - break; - } - - /* - * Set the MUX - */ - writel(val, sys_clcd); - - /* - * And now enable the PSUs - */ - val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; - writel(val, sys_clcd); - - /* - * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on - */ - if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) { - void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL); - unsigned long ctrl; - - ctrl = readl(versatile_ib2_ctrl); - ctrl |= 0x01; - writel(ctrl, versatile_ib2_ctrl); - } -} - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static int versatile_clcd_setup(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET; - const char *panel_name; - u32 val; - - is_sanyo_2_5_lcd = false; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel_name = "Sanyo TM38QV67A02A"; - else if (val == SYS_CLCD_ID_SANYO_2_5) { - panel_name = "Sanyo QVGA Portrait"; - is_sanyo_2_5_lcd = true; - } else if (val == SYS_CLCD_ID_EPSON_2_2) - panel_name = "Epson L2F50113T00"; - else if (val == SYS_CLCD_ID_VGA) - panel_name = "VGA"; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel_name = "VGA"; - } - - fb->panel = versatile_clcd_get_panel(panel_name); - if (!fb->panel) - return -EINVAL; - - return versatile_clcd_setup_dma(fb, SZ_1M); -} - -static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs) -{ - clcdfb_decode(fb, regs); - - /* Always clear BGR for RGB565: we do the routing externally */ - if (fb->fb.var.green.length == 6) - regs->cntl &= ~CNTL_BGR; -} - -static struct clcd_board clcd_plat_data = { - .name = "Versatile", - .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888, - .check = clcdfb_check, - .decode = versatile_clcd_decode, - .disable = versatile_clcd_disable, - .enable = versatile_clcd_enable, - .setup = versatile_clcd_setup, - .mmap = versatile_clcd_mmap_dma, - .remove = versatile_clcd_remove_dma, -}; - -/* - * Lookup table for attaching a specific name and platform_data pointer to - * devices as they get created by of_platform_populate(). Ideally this table - * would not exist, but the current clock implementation depends on some devices - * having a specific name. - */ -struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data), - OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data), - - OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data), - - {} -}; - -void versatile_restart(enum reboot_mode mode, const char *cmd) -{ - void __iomem *sys = __io_address(VERSATILE_SYS_BASE); - u32 val; - - val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET); - val |= 0x105; - - __raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET); - __raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET); - __raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET); -} - -/* Early initializations */ -void __init versatile_init_early(void) -{ - u32 val; - - /* - * set clock frequency: - * VERSATILE_REFCLK is 32KHz - * VERSATILE_TIMCLK is 1MHz - */ - val = readl(__io_address(VERSATILE_SCTL_BASE)); - writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, - __io_address(VERSATILE_SCTL_BASE)); -} |