diff options
Diffstat (limited to 'arch/arm/plat-mxc/include/mach')
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/common.h | 12 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/debug-macro.S | 10 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/devices-common.h | 8 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/gpio.h | 27 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/hardware.h | 28 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/iomux-mx53.h | 14 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/iomux-v1.h | 4 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/iomux-v3.h | 2 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/iomux.h | 26 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mx53.h | 54 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mxc.h | 8 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/sdma.h | 6 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/timex.h | 13 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/uncompress.h | 1 |
14 files changed, 73 insertions, 140 deletions
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index da7991832af6..91fa2632aa5e 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -43,6 +43,15 @@ extern void mx35_init_irq(void); extern void mx50_init_irq(void); extern void mx51_init_irq(void); extern void mx53_init_irq(void); +extern void imx1_soc_init(void); +extern void imx21_soc_init(void); +extern void imx25_soc_init(void); +extern void imx27_soc_init(void); +extern void imx31_soc_init(void); +extern void imx35_soc_init(void); +extern void imx50_soc_init(void); +extern void imx51_soc_init(void); +extern void imx53_soc_init(void); extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mxc_register_gpios(void); +extern struct platform_device *mxc_register_gpio(int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_arch_reset_init(void __iomem *); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 8e8d175e5077..91fc7cdb5dc9 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -12,32 +12,32 @@ */ #include <mach/hardware.h> -#ifdef CONFIG_ARCH_MX1 +#ifdef CONFIG_SOC_IMX1 #define UART_PADDR MX1_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX25_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX2 +#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27) #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX2x_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX3 +#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35) #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX3x_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX5 +#ifdef CONFIG_SOC_IMX51 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index fa8477337f91..bf93820ab61c 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -9,6 +9,10 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/init.h> +#include <mach/sdma.h> + +extern struct device mxc_aips_bus; +extern struct device mxc_ahb_bus; struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, @@ -291,3 +295,7 @@ struct imx_spi_imx_data { struct platform_device *__init imx_add_spi_imx( const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata); + +struct platform_device *imx_add_imx_dma(void); +struct platform_device *imx_add_imx_sdma( + resource_size_t iobase, int irq, struct sdma_platform_data *pdata); diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index a2747f12813e..31c820c1b796 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -36,31 +36,4 @@ #define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio)) #define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) -struct mxc_gpio_port { - void __iomem *base; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; - u32 both_edges; - spinlock_t lock; -}; - -#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ - { \ - .chip.label = "gpio-" #_id, \ - .irq = _irq, \ - .irq_high = _irq_high, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _GPIO ## _hwid ## _BASE_ADDR), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ - } - -#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) -#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ - DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) - -int mxc_gpio_init(struct mxc_gpio_port*, int); - #endif diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 67d3e2bed065..a8bfd565dcad 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -97,35 +97,17 @@ #include <mach/mxc.h> -#ifdef CONFIG_ARCH_MX5 #include <mach/mx50.h> #include <mach/mx51.h> #include <mach/mx53.h> -#endif - -#ifdef CONFIG_ARCH_MX3 #include <mach/mx3x.h> #include <mach/mx31.h> #include <mach/mx35.h> -#endif - -#ifdef CONFIG_ARCH_MX2 -# include <mach/mx2x.h> -# ifdef CONFIG_MACH_MX21 -# include <mach/mx21.h> -# endif -# ifdef CONFIG_MACH_MX27 -# include <mach/mx27.h> -# endif -#endif - -#ifdef CONFIG_ARCH_MX1 -# include <mach/mx1.h> -#endif - -#ifdef CONFIG_ARCH_MX25 -# include <mach/mx25.h> -#endif +#include <mach/mx2x.h> +#include <mach/mx21.h> +#include <mach/mx27.h> +#include <mach/mx1.h> +#include <mach/mx25.h> #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index e95d9cb8aeb7..e11dd5f09c34 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -39,7 +39,7 @@ #define _MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0) #define _MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0) #define _MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0) -#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, o, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, 0, 0x0, 0, 0) #define _MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0) #define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0) #define _MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x24, 4, 0x890, 0, 0) @@ -697,7 +697,7 @@ #define _MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0) #define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0) -#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 17, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, 0x0, 0, 0) #define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0) #define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0) @@ -958,12 +958,12 @@ #define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0) diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h index c07d30210c57..6fa8a707b9a0 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -85,9 +85,6 @@ #define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) #define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) - #define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) #define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) #define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) @@ -98,7 +95,6 @@ extern int mxc_gpio_mode(int gpio_mode); extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label); -extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); extern int __init imx_iomuxv1_init(void __iomem *base, int numports); diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 82620af1922f..ebbce33097a7 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -66,7 +66,6 @@ typedef u64 iomux_v3_cfg_t; #define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT) #define MUX_PAD_CTRL_SHIFT 41 #define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT) -#define NO_PAD_CTRL ((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16)) #define MUX_SEL_INPUT_SHIFT 58 #define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) @@ -85,6 +84,7 @@ typedef u64 iomux_v3_cfg_t; * Use to set PAD control */ +#define NO_PAD_CTRL (1 << 16) #define PAD_CTL_DVS (1 << 13) #define PAD_CTL_HYS (1 << 8) diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h deleted file mode 100644 index 3d226d7e7be2..000000000000 --- a/arch/arm/plat-mxc/include/mach/iomux.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __MACH_IOMUX_H__ -#define __MACH_IOMUX_H__ - -/* This file will go away, please include mach/iomux-mx... directly */ - -#ifdef CONFIG_ARCH_MX1 -#include <mach/iomux-mx1.h> -#endif -#ifdef CONFIG_ARCH_MX2 -#include <mach/iomux-mx2x.h> -#ifdef CONFIG_MACH_MX21 -#include <mach/iomux-mx21.h> -#endif -#ifdef CONFIG_MACH_MX27 -#include <mach/iomux-mx27.h> -#endif -#endif - -#endif /* __MACH_IOMUX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index 9d2a1ef84de2..5e3c3236ebf3 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -145,14 +145,14 @@ /* * Memory regions and CS */ -#define MX53_CSD0_BASE_ADDR 0x90000000 -#define MX53_CSD1_BASE_ADDR 0xA0000000 -#define MX53_CS0_BASE_ADDR 0xB0000000 -#define MX53_CS1_BASE_ADDR 0xB8000000 -#define MX53_CS2_BASE_ADDR 0xC0000000 -#define MX53_CS3_BASE_ADDR 0xC8000000 -#define MX53_CS4_BASE_ADDR 0xCC000000 -#define MX53_CS5_BASE_ADDR 0xCE000000 +#define MX53_CSD0_BASE_ADDR 0x70000000 +#define MX53_CSD1_BASE_ADDR 0xB0000000 +#define MX53_CS0_BASE_ADDR 0xF0000000 +#define MX53_CS1_32MB_BASE_ADDR 0xF2000000 +#define MX53_CS1_64MB_BASE_ADDR 0xF4000000 +#define MX53_CS2_64MB_BASE_ADDR 0xF4000000 +#define MX53_CS2_96MB_BASE_ADDR 0xF6000000 +#define MX53_CS3_BASE_ADDR 0xF6000000 #define MX53_IO_P2V(x) IMX_IO_P2V(x) #define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x)) @@ -176,10 +176,10 @@ /* * DMA request assignments */ -#define MX53_DMA_REQ_SSI3_TX1 47 -#define MX53_DMA_REQ_SSI3_RX1 46 -#define MX53_DMA_REQ_SSI3_TX2 45 -#define MX53_DMA_REQ_SSI3_RX2 44 +#define MX53_DMA_REQ_SSI3_TX0 47 +#define MX53_DMA_REQ_SSI3_RX0 46 +#define MX53_DMA_REQ_SSI3_TX1 45 +#define MX53_DMA_REQ_SSI3_RX1 44 #define MX53_DMA_REQ_UART3_TX 43 #define MX53_DMA_REQ_UART3_RX 42 #define MX53_DMA_REQ_ESAI_TX 41 @@ -194,14 +194,14 @@ #define MX53_DMA_REQ_ASRC_DMA1 32 #define MX53_DMA_REQ_EMI_WR 31 #define MX53_DMA_REQ_EMI_RD 30 -#define MX53_DMA_REQ_SSI1_TX1 29 -#define MX53_DMA_REQ_SSI1_RX1 28 -#define MX53_DMA_REQ_SSI1_TX2 27 -#define MX53_DMA_REQ_SSI1_RX2 26 -#define MX53_DMA_REQ_SSI2_TX1 25 -#define MX53_DMA_REQ_SSI2_RX1 24 -#define MX53_DMA_REQ_SSI2_TX2 23 -#define MX53_DMA_REQ_SSI2_RX2 22 +#define MX53_DMA_REQ_SSI1_TX0 29 +#define MX53_DMA_REQ_SSI1_RX0 28 +#define MX53_DMA_REQ_SSI1_TX1 27 +#define MX53_DMA_REQ_SSI1_RX1 26 +#define MX53_DMA_REQ_SSI2_TX0 25 +#define MX53_DMA_REQ_SSI2_RX0 24 +#define MX53_DMA_REQ_SSI2_TX1 23 +#define MX53_DMA_REQ_SSI2_RX1 22 #define MX53_DMA_REQ_I2C2_SDHC2 21 #define MX53_DMA_REQ_I2C1_SDHC1 20 #define MX53_DMA_REQ_UART1_TX 19 @@ -233,7 +233,7 @@ #define MX53_INT_ESDHC2 2 #define MX53_INT_ESDHC3 3 #define MX53_INT_ESDHC4 4 -#define MX53_INT_RESV5 5 +#define MX53_INT_DAP 5 #define MX53_INT_SDMA 6 #define MX53_INT_IOMUX 7 #define MX53_INT_NFC 8 @@ -241,7 +241,7 @@ #define MX53_INT_IPU_ERR 10 #define MX53_INT_IPU_SYN 11 #define MX53_INT_GPU 12 -#define MX53_INT_RESV13 13 +#define MX53_INT_UART4 13 #define MX53_INT_USB_H1 14 #define MX53_INT_EMI 15 #define MX53_INT_USB_H2 16 @@ -262,8 +262,8 @@ #define MX53_INT_UART1 31 #define MX53_INT_UART2 32 #define MX53_INT_UART3 33 -#define MX53_INT_RESV34 34 -#define MX53_INT_RESV35 35 +#define MX53_INT_RTC 34 +#define MX53_INT_PTP 35 #define MX53_INT_ECSPI1 36 #define MX53_INT_ECSPI2 37 #define MX53_INT_CSPI 38 @@ -293,8 +293,8 @@ #define MX53_INT_I2C1 62 #define MX53_INT_I2C2 63 #define MX53_INT_I2C3 64 -#define MX53_INT_RESV65 65 -#define MX53_INT_RESV66 66 +#define MX53_INT_MLB 65 +#define MX53_INT_ASRC 66 #define MX53_INT_SPDIF 67 #define MX53_INT_SIM_DAT 68 #define MX53_INT_IIM 69 @@ -314,7 +314,7 @@ #define MX53_INT_CAN2 83 #define MX53_INT_GPU2_IRQ 84 #define MX53_INT_GPU2_BUSY 85 -#define MX53_INT_RESV86 86 +#define MX53_INT_UART5 86 #define MX53_INT_FEC 87 #define MX53_INT_OWIRE 88 #define MX53_INT_CTI1_TG2 89 diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 4ac53ce97c24..09879235a9f5 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -68,7 +68,7 @@ extern unsigned int __mxc_cpu_type; #endif -#ifdef CONFIG_ARCH_MX1 +#ifdef CONFIG_SOC_IMX1 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -80,7 +80,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx1() (0) #endif -#ifdef CONFIG_MACH_MX21 +#ifdef CONFIG_SOC_IMX21 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -92,7 +92,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx21() (0) #endif -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -104,7 +104,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx25() (0) #endif -#ifdef CONFIG_MACH_MX27 +#ifdef CONFIG_SOC_IMX27 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h index 913e0432e40e..f495c87c113f 100644 --- a/arch/arm/plat-mxc/include/mach/sdma.h +++ b/arch/arm/plat-mxc/include/mach/sdma.h @@ -49,14 +49,12 @@ struct sdma_script_start_addrs { * struct sdma_platform_data - platform specific data for SDMA engine * * @sdma_version The version of this SDMA engine - * @cpu_name used to generate the firmware name - * @to_version CPU Tape out version + * @fw_name The firmware name * @script_addrs SDMA scripts addresses in SDMA ROM */ struct sdma_platform_data { int sdma_version; - char *cpu_name; - int to_version; + char *fw_name; struct sdma_script_start_addrs *script_addrs; }; diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index d61d5c74817c..10343d1f87e1 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -16,16 +16,7 @@ #ifndef __ASM_ARCH_MXC_TIMEX_H__ #define __ASM_ARCH_MXC_TIMEX_H__ -#if defined CONFIG_ARCH_MX1 -#define CLOCK_TICK_RATE 16000000 -#elif defined CONFIG_ARCH_MX2 -#define CLOCK_TICK_RATE 13300000 -#elif defined CONFIG_ARCH_MX3 -#define CLOCK_TICK_RATE 16625000 -#elif defined CONFIG_ARCH_MX25 -#define CLOCK_TICK_RATE 16000000 -#elif defined CONFIG_ARCH_MX5 -#define CLOCK_TICK_RATE 8000000 -#endif +/* Bogus value */ +#define CLOCK_TICK_RATE 12345678 #endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index d85e2d1c0324..88fd40452567 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -117,6 +117,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX53_EVK: case MACH_TYPE_MX53_LOCO: case MACH_TYPE_MX53_SMD: + case MACH_TYPE_MX53_ARD: uart_base = MX53_UART1_BASE_ADDR; break; default: |