diff options
Diffstat (limited to 'arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts')
| -rw-r--r-- | arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts | 88 |
1 files changed, 6 insertions, 82 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts index c924090331d0..076a0b983101 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> + /* * DTS for Emlid Neutis N5 Dev board. - * - * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> */ /dts-v1/; @@ -15,14 +15,6 @@ "emlid,neutis-n5", "allwinner,sun50i-h5"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - connector { compatible = "hdmi-connector"; type = "a"; @@ -34,16 +26,6 @@ }; }; - reg_usb0_vbus: usb0-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ - status = "okay"; - }; - vdd_cpux: gpio-regulator { compatible = "regulator-gpio"; regulator-name = "vdd-cpux"; @@ -59,33 +41,11 @@ }; }; -&codec { - allwinner,audio-routing = - "Line Out", "LINEOUT", - "LINEIN", "Line In", - "MIC1", "Mic", - "MIC2", "Mic", - "Mic", "MBIAS"; - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; +&cpu0 { + cpu-supply = <&vdd_cpux>; }; -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { +&codec { status = "okay"; }; @@ -106,42 +66,6 @@ }; }; -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pa_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - usb0_vbus-supply = <®_usb0_vbus>; +&i2c1 { status = "okay"; }; |