diff options
Diffstat (limited to 'arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 78 |
1 files changed, 64 insertions, 14 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index df4cbd7ef96c..92745128fcfe 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -1,8 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2018 Amarula Solutions - * Author: Jagan Teki <jagan@amarulasolutions.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Amarula Solutions +// Author: Jagan Teki <jagan@amarulasolutions.com> /dts-v1/; @@ -22,16 +20,35 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + ext_osc32k: ext_osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + leds { compatible = "gpio-leds"; - power { + led-0 { label = "orangepi:red:power"; gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ default-state = "on"; }; - status { + led-1 { label = "orangepi:green:status"; gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ }; @@ -47,6 +64,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -60,6 +81,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; @@ -75,14 +106,28 @@ status = "okay"; }; -&r_i2c { +&pio { + vcc-pc-supply = <®_bldo2>; + vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_aldo1>; +}; + +&r_ir { status = "okay"; +}; - axp805: pmic@36 { +&r_pio { + vcc-pm-supply = <®_bldo3>; +}; + +&r_rsb { + status = "okay"; + + axp805: pmic@745 { compatible = "x-powers,axp805", "x-powers,axp806"; - reg = <0x36>; + reg = <0x745>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; x-powers,self-working-mode; @@ -195,8 +240,8 @@ }; }; -&r_ir { - status = "okay"; +&rtc { + clocks = <&ext_osc32k>; }; &uart0 { @@ -206,7 +251,12 @@ }; &usb2otg { - dr_mode = "otg"; + /* + * OrangePi Lite 2 and One Plus, where this DT is used, don't + * have a controllable VBUS even though they do have an ID pin. + * Using it as anything but a USB host is unsafe. + */ + dr_mode = "host"; status = "okay"; }; |