1 files changed, 15 insertions, 29 deletions

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 2ac9e3a43b96..f39fcabc763f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -15,7 +15,7 @@
 	compatible = "seirobotics,sei510", "amlogic,g12a";
 	model = "SEI Robotics SEI510";
 
-	adc_keys {
+	keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
 		io-channel-names = "buttons";
@@ -45,7 +45,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
@@ -84,7 +83,7 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
-	ao_5v: regulator-ao_5v {
+	ao_5v: regulator-ao-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "AO_5V";
 		regulator-min-microvolt = <5000000>;
@@ -93,7 +92,7 @@
 		regulator-always-on;
 	};
 
-	dc_in: regulator-dc_in {
+	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
 		regulator-min-microvolt = <5000000>;
@@ -101,7 +100,7 @@
 		regulator-always-on;
 	};
 
-	emmc_1v8: regulator-emmc_1v8 {
+	emmc_1v8: regulator-emmc-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "EMMC_1V8";
 		regulator-min-microvolt = <1800000>;
@@ -110,7 +109,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3: regulator-vddao_3v3 {
+	vddao_3v3: regulator-vddao-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
@@ -119,7 +118,7 @@
 		regulator-always-on;
 	};
 
-	vddao_3v3_t: regultor-vddao_3v3_t {
+	vddao_3v3_t: regulator-vddao-3v3-t {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDAO_3V3_T";
 		regulator-min-microvolt = <3300000>;
@@ -139,7 +138,7 @@
 		regulator-min-microvolt = <721000>;
 		regulator-max-microvolt = <1022000>;
 
-		vin-supply = <&dc_in>;
+		pwm-supply = <&dc_in>;
 
 		pwms = <&pwm_AO_cd 1 1250 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -148,7 +147,7 @@
 		regulator-always-on;
 	};
 
-	vddio_ao1v8: regulator-vddio_ao1v8 {
+	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
@@ -157,14 +156,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
@@ -181,7 +172,7 @@
 
 	sound {
 		compatible = "amlogic,axg-sound-card";
-		model = "G12A-SEI510";
+		model = "SEI510";
 		audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
 				 <&tdmin_a>, <&tdmin_b>;
 		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
@@ -210,6 +201,10 @@
 				"TODDR_B IN 1", "TDMIN_B OUT",
 				"TODDR_C IN 1", "TDMIN_B OUT";
 
+		clocks = <&clkc CLKID_MPLL2>,
+			 <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>;
+
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>;
@@ -217,7 +212,6 @@
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;
-		status = "okay";
 
 		dai-link-0 {
 			sound-dai = <&frddr_a>;
@@ -269,7 +263,7 @@
 			dai-tdm-slot-tx-mask-3 = <1 1>;
 			mclk-fs = <256>;
 
-			codec@0 {
+			codec {
 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
 			};
 		};
@@ -320,28 +314,24 @@
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
@@ -395,8 +385,6 @@
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin1";
 	status = "okay";
 };
 
@@ -404,8 +392,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;
 	pinctrl-names = "default";
-	clocks = <&xtal>;
-	clock-names = "clkin0";
 };
 
 &pdm {
@@ -472,7 +458,7 @@
 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
-	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";