diff options
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 47 |
1 files changed, 41 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 1ffa1c238a72..ee4ada61c59c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -135,6 +135,24 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; }; ðmac { @@ -156,7 +174,11 @@ #size-cells = <0>; eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; }; }; @@ -177,6 +199,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &i2c_A { status = "okay"; pinctrl-0 = <&i2c_a_pins>; @@ -194,7 +228,9 @@ "USB HUB nRESET", "USB OTG Power En", "J7 Header Pin2", "IR In", "J7 Header Pin4", "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7", - "HDMI CEC", "SYS LED"; + "HDMI CEC", "SYS LED", + /* GPIO_TEST_N */ + ""; }; &pinctrl_periphs { @@ -233,11 +269,9 @@ "J2 Header Pin12", "J2 Header Pin13", "J2 Header Pin8", "J2 Header Pin10", "", "", "", "", "", - "J2 Header Pin11", "", "J2 Header Pin7", + "J2 Header Pin11", "", "J2 Header Pin7", "", /* Bank GPIOCLK */ - "", "", "", "", - /* GPIO_TEST_N */ - ""; + "", "", "", ""; }; &saradc { @@ -271,7 +305,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; @@ -301,6 +335,7 @@ &usb1_phy { status = "okay"; + phy-supply = <&usb_otg_pwr>; }; &usb0 { |