diff options
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 39 |
1 files changed, 34 insertions, 5 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 64c54c92e214..9671f1e3c74a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -72,6 +72,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; @@ -96,6 +108,13 @@ regulator-settling-time-down-us = <50000>; }; + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; @@ -121,6 +140,11 @@ status = "okay"; }; +&internal_phy { + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -149,7 +173,9 @@ "7J1 Header Pin12", "IR In", "9J3 Switch HDMI CEC/7J1 Header Pin11", - "7J1 Header Pin13"; + "7J1 Header Pin13", + /* GPIO_TEST_N */ + "7J1 Header Pin15"; }; &pinctrl_periphs { @@ -191,9 +217,12 @@ "7J1 Header Pin32", "7J1 Header Pin29", "7J1 Header Pin31", /* Bank GPIOCLK */ - "7J1 Header Pin7", "", - /* GPIO_TEST_N */ - "7J1 Header Pin15"; + "7J1 Header Pin7", ""; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; }; /* SD card */ @@ -221,7 +250,7 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; |