summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/bitmain/bm1880.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/bitmain/bm1880.dtsi')
-rw-r--r--arch/arm64/boot/dts/bitmain/bm1880.dtsi28
1 files changed, 28 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index d65453f99a99..fa6e6905f588 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -4,6 +4,7 @@
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*/
+#include <dt-bindings/clock/bm1880-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/bitmain,bm1880-reset.h>
@@ -66,6 +67,12 @@
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
+ osc: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -94,6 +101,15 @@
reg = <0x400 0x120>;
};
+ clk: clock-controller@e8 {
+ compatible = "bitmain,bm1880-clk";
+ reg = <0xe8 0x0c>, <0x800 0xb0>;
+ reg-names = "pll", "sys";
+ clocks = <&osc>;
+ clock-names = "osc";
+ #clock-cells = <1>;
+ };
+
rst: reset-controller@c00 {
compatible = "bitmain,bm1880-reset";
reg = <0xc00 0x8>;
@@ -158,6 +174,9 @@
uart0: serial@58018000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x58018000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -168,6 +187,9 @@
uart1: serial@5801A000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801a000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -178,6 +200,9 @@
uart2: serial@5801C000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801c000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -188,6 +213,9 @@
uart3: serial@5801E000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801e000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;