diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts | 306 |
1 files changed, 306 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts new file mode 100644 index 000000000000..b5e76b992a10 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marek Vasut <marex@denx.de> + * + * DHCOM iMX8MP variant: + * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2 + * DHCOM PCB number: 660-100 or newer + * PDK3 PCB number: 669-100 or newer + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mp-dhcom-som.dtsi" + +/ { + model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)"; + compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som", + "fsl,imx8mp"; + + chosen { + stdout-path = &uart1; + }; + + clk_pcie: clock-pcie { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_c_0_hs_ep: endpoint { + remote-endpoint = <&dwc3_0_hs_ep>; + }; + }; + + port@1 { + reg = <1>; + + usb_c_0_ss_ep: endpoint { + remote-endpoint = <&ptn5150_in_ep>; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */ + label = "TA1-GPIO-A"; + linux,code = <KEY_A>; + pinctrl-0 = <&pinctrl_dhcom_a>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-1 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */ + label = "TA2-GPIO-B"; + linux,code = <KEY_B>; + pinctrl-0 = <&pinctrl_dhcom_b>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-2 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */ + label = "TA3-GPIO-C"; + linux,code = <KEY_C>; + pinctrl-0 = <&pinctrl_dhcom_c>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-3 { + gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */ + label = "TA4-GPIO-E"; + linux,code = <KEY_E>; + pinctrl-0 = <&pinctrl_dhcom_e>; + pinctrl-names = "default"; + wakeup-source; + }; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */ + pinctrl-0 = <&pinctrl_dhcom_d>; + pinctrl-names = "default"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */ + pinctrl-0 = <&pinctrl_dhcom_f>; + pinctrl-names = "default"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */ + pinctrl-0 = <&pinctrl_dhcom_g>; + pinctrl-names = "default"; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */ + pinctrl-0 = <&pinctrl_dhcom_i>; + pinctrl-names = "default"; + }; + }; + + reg_avdd: regulator-avdd { /* AUDIO_VDD */ + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "AUDIO_VDD"; + }; +}; + +&i2c5 { + i2c-mux@70 { + compatible = "nxp,pca9540"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmuxed0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + typec@3d { + compatible = "nxp,ptn5150"; + reg = <0x3d>; + interrupt-parent = <&gpio4>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ptn5150>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ptn5150_in_ep: endpoint { + remote-endpoint = <&usb_c_0_ss_ep>; + }; + }; + + port@1 { + reg = <1>; + + ptn5150_out_ep: endpoint { + remote-endpoint = <&dwc3_0_ss_ep>; + }; + }; + }; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <20000>; /* 0.02 R */ + ti,shunt-gain = <1>; /* Drop cca. 40mV */ + }; + + eeprom_board: eeprom@54 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x54>; + }; + }; + + i2cmuxed1: i2c@1 { /* HDMI DDC I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +ðphy0g { + reg = <7>; +}; + +&fec { /* Second ethernet */ + pinctrl-0 = <&pinctrl_fec_rgmii>; + phy-handle = <ðphypdk>; + phy-mode = "rgmii-id"; + + mdio { + ethphypdk: ethernet-phy@7 { /* Micrel KSZ9131RNXI */ + compatible = "ethernet-phy-id0022.1642", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy1>; + pinctrl-names = "default"; + reg = <7>; + reset-assert-us = <1000>; + /* RESET_N signal rise time ~100ms */ + reset-deassert-us = <120000>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&flexcan1 { + status = "okay"; +}; + +&pcie_phy { + clocks = <&clk_pcie>; + clock-names = "ref"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + status = "okay"; +}; + +&pcie { + fsl,max-link-speed = <3>; + reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usb_dwc3_0 { + usb-role-switch; + + port { + #address-cells = <1>; + #size-cells = <0>; + + dwc3_0_hs_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&usb_c_0_hs_ep>; + }; + + dwc3_0_ss_ep: endpoint@1 { + reg = <1>; + remote-endpoint = <&ptn5150_out_ep>; + }; + }; +}; + +&usb3_1 { + fsl,disable-port-power-control; + fsl,permanently-attached; +}; + +&usb_dwc3_1 { + /* This port has USB5734 Hub connected to it, PWR/OC pins are unused */ + /delete-property/ pinctrl-names; + /delete-property/ pinctrl-0; +}; + +&iomuxc { + /* + * GPIO_A,B,C,E are connected to buttons. + * GPIO_D,F,G,I are connected to LEDs. + * GPIO_H is connected to USB Hub RESET_N. + * GPIO_M is connected to CLKOUT2. + */ + pinctrl-0 = <&pinctrl_hog_base + &pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k + &pinctrl_dhcom_l + &pinctrl_dhcom_int>; + + pinctrl_ptn5150: ptn5150grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40000000 + >; + }; +}; |