diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 235 |
1 files changed, 222 insertions, 13 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index c8640cac3edc..436152308642 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -6,8 +6,10 @@ /dts-v1/; +#include <dt-bindings/phy/phy-imx8-pcie.h> #include <dt-bindings/leds/leds-pca9532.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/thermal/thermal.h> #include "imx8mp-phycore-som.dtsi" / { @@ -19,6 +21,49 @@ stdout-path = &uart1; }; + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds1>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <11>; + enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + num-interpolated-steps = <2>; + power-supply = <®_lvds1_reg_en>; + pwms = <&pwm3 0 50000 0>; + }; + + fan0: fan { + compatible = "gpio-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan>; + gpio-fan,speed-map = <0 0 + 13000 1>; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + #cooling-cells = <2>; + }; + + panel1_lvds: panel-lvds { + compatible = "edt,etml1010g3dra"; + backlight = <&backlight_lvds>; + power-supply = <®_vcc_3v3_sw>; + + port { + panel1_in: endpoint { + remote-endpoint = <&ldb_lvds_ch1>; + }; + }; + }; + + reg_vcc_5v_sw: regulator-vcc-5v-sw { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "VCC_5V_SW"; + }; + reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -39,6 +84,15 @@ regulator-name = "can2-stby"; }; + reg_lvds1_reg_en: regulator-lvds1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "lvds1_reg_en"; + }; + reg_usb1_vbus: regulator-usb1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -61,6 +115,48 @@ startup-delay-us = <100>; off-on-delay-us = <12000>; }; + + reg_vcc_3v3_sw: regulator-vcc-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + thermal-zones { + soc-thermal { + trips { + active1: trip2 { + temperature = <60000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&active1>; + cooling-device = <&fan0 1 THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +/* TPM */ +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + tpm: tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <38000000>; + }; }; &eqos { @@ -115,6 +211,7 @@ compatible = "atmel,24c02"; reg = <0x51>; pagesize = <16>; + vcc-supply = <®_vcc_3v3_sw>; }; leds@62 { @@ -135,10 +232,71 @@ }; }; +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + status = "okay"; + + ports { + port@2 { + ldb_lvds_ch1: endpoint { + remote-endpoint = <&panel1_in>; + }; + }; + }; +}; + +&media_blk_ctrl { + /* + * The LVDS panel on this device uses 72.4 MHz pixel clock, + * set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB + * serializer and LCDIFv3 scanout engine can reach accurate + * pixel clock of exactly 72.4 MHz. + */ + assigned-clock-rates = <500000000>, <200000000>, + <0>, <0>, <500000000>, + <506800000>; +}; + &snvs_pwrkey { status = "okay"; }; +&pcie_phy { + clocks = <&hsio_blk_ctrl>; + clock-names = "ref"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + fsl,clkreq-unsupported; + status = "okay"; +}; + +/* Mini PCIe */ +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_vcc_3v3_sw>; + status = "okay"; +}; + +&pwm3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&rv3028 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + aux-voltage-chargeable = <1>; + wakeup-source; + trickle-resistor-ohms = <3000>; +}; + /* debug console */ &uart1 { pinctrl-names = "default"; @@ -163,6 +321,7 @@ /* USB2 4-port USB3.0 HUB */ &usb3_phy1 { + vbus-supply = <®_vcc_5v_sw>; status = "okay"; }; @@ -196,22 +355,25 @@ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <&ldo5>; bus-width = <4>; status = "okay"; }; &gpio1 { gpio-line-names = "", "", "X_PMIC_WDOG_B", "", - "PMIC_SD_VSEL", "", "", "", "", "", - "", "", "USB1_OTG_PWR", "", "", "X_nETHPHY_INT"; + "PMIC_SD_VSEL", "", "", "", "PCIe_nPERST", "LVDS1REG_EN", + "PCIe_nWAKE", "PCIe_nCLKREQ", "USB1_OTG_PWR", "", + "PCIe_nW_DISABLE"; }; &gpio2 { gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "", "X_SD2_CD_B", "", "", "", - "", "", "", "SD2_RESET_B"; + "", "", "", "SD2_RESET_B", "LVDS1_BL_EN"; }; &gpio3 { @@ -225,10 +387,24 @@ gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", - "", "", "X_PMIC_IRQ_B", "", "nENET0_INT_PWDN"; + "", "", "X_PMIC_IRQ_B", "nRTC_INT", "nENET0_INT_PWDN"; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "X_ECSPI1_SSO"; }; &iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x80 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x80 + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x80 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x00 + >; + }; + pinctrl_eqos: eqosgrp { fsl,pins = < MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 @@ -239,16 +415,22 @@ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 - MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 - MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 - MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 - MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 - MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 - MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12 + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12 + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12 + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x12 MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10 >; }; + pinctrl_fan: fan0grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x16 + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154 @@ -289,16 +471,43 @@ >; }; + pinctrl_lvds1: lvds1grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x12 + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x60 + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x60 /* open drain, pull up */ + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x40 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x12 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 >; }; + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x1C0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < - MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x40 - MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x40 + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 >; }; @@ -319,7 +528,7 @@ pinctrl_usdhc2_pins: usdhc2-gpiogrp { fsl,pins = < - MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40 >; }; |