diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 79 |
1 files changed, 58 insertions, 21 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 6895bcc12165..38732579d13e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -20,6 +20,8 @@ backlight_dsi: backlight-dsi { compatible = "led-backlight"; leds = <&led_backlight>; + brightness-levels = <255>; + default-brightness-level = <190>; }; pmic_osc: clock-pmic { @@ -84,13 +86,21 @@ compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audiopwr>; - regulator-name = "AUDIO_PWR_EN"; + regulator-name = "AUD_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; enable-active-high; }; + reg_mic_2v4: regulator-mic-2v4 { + compatible = "regulator-fixed"; + regulator-name = "MIC_2V4"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2400000>; + vin-supply = <®_aud_1v8>; + }; + /* * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC * since we can't have it twice in the 2 different regulator nodes. @@ -319,6 +329,10 @@ opp-hz = /bits/ 64 <100000000>; }; + opp-166000000 { + opp-hz = /bits/ 64 <166935483>; + }; + opp-800000000 { opp-hz = /bits/ 64 <800000000>; }; @@ -371,6 +385,16 @@ }; &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* CLKO2 for cameras on both CSI1 and CSI2 */ + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f + >; + }; + pinctrl_audiopwr: audiopwrgrp { fsl,pins = < /* AUDIO_POWER_EN_3V3 */ @@ -662,7 +686,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd @@ -679,7 +703,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf @@ -709,7 +733,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d @@ -722,7 +746,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f @@ -758,7 +782,7 @@ }; &i2c1 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; @@ -806,6 +830,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>; clocks = <&pmic_osc>; + #clock-cells = <0>; clock-names = "osc"; clock-output-names = "pmic_clk"; interrupt-parent = <&gpio1>; @@ -819,9 +844,9 @@ regulator-max-microvolt = <1300000>; regulator-boot-on; regulator-ramp-delay = <1250>; - rohm,dvs-run-voltage = <900000>; - rohm,dvs-idle-voltage = <850000>; - rohm,dvs-suspend-voltage = <800000>; + rohm,dvs-run-voltage = <880000>; + rohm,dvs-idle-voltage = <820000>; + rohm,dvs-suspend-voltage = <810000>; regulator-always-on; }; @@ -831,8 +856,8 @@ regulator-max-microvolt = <1300000>; regulator-boot-on; regulator-ramp-delay = <1250>; - rohm,dvs-run-voltage = <1000000>; - rohm,dvs-idle-voltage = <900000>; + rohm,dvs-run-voltage = <950000>; + rohm,dvs-idle-voltage = <850000>; regulator-always-on; }; @@ -841,14 +866,14 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; - rohm,dvs-run-voltage = <900000>; + rohm,dvs-run-voltage = <850000>; }; buck4_reg: BUCK4 { regulator-name = "buck4"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; - rohm,dvs-run-voltage = <1000000>; + rohm,dvs-run-voltage = <930000>; }; buck5_reg: BUCK5 { @@ -956,12 +981,12 @@ }; &i2c2 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - magnetometer@1e { + magnetometer: magnetometer@1e { compatible = "st,lsm9ds1-magn"; reg = <0x1e>; pinctrl-names = "default"; @@ -1005,7 +1030,7 @@ }; &i2c3 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; @@ -1023,7 +1048,7 @@ DBVDD-supply = <®_aud_1v8>; AVDD-supply = <®_aud_1v8>; CPVDD-supply = <®_aud_1v8>; - MICVDD-supply = <®_aud_1v8>; + MICVDD-supply = <®_mic_2v4>; PLLVDD-supply = <®_aud_1v8>; SPKVDD1-supply = <®_vsys_3v4>; SPKVDD2-supply = <®_vsys_3v4>; @@ -1095,7 +1120,7 @@ }; &i2c4 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; @@ -1127,7 +1152,9 @@ interrupt-parent = <&gpio3>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; phys = <&usb3_phy0>; - ti,precharge-current = <130000>; /* uA */ + ti,battery-regulation-voltage = <4208000>; /* uV */ + ti,termination-current = <128000>; /* uA */ + ti,precharge-current = <128000>; /* uA */ ti,minimum-sys-voltage = <3700000>; /* uV */ ti,boost-voltage = <5000000>; /* uV */ ti,boost-max-current = <1500000>; /* uA */ @@ -1143,6 +1170,7 @@ }; &mipi_csi1 { + assigned-clock-rates = <266000000>, <200000000>, <66000000>; status = "okay"; ports { @@ -1299,7 +1327,6 @@ #address-cells = <1>; #size-cells = <0>; dr_mode = "otg"; - snps,dis_u3_susphy_quirk; usb-role-switch; status = "okay"; @@ -1366,7 +1393,7 @@ mmc-pwrseq = <&usdhc2_pwrseq>; post-power-on-delay-ms = <1000>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - max-frequency = <50000000>; + max-frequency = <100000000>; disable-wp; cap-sdio-irq; keep-power-in-suspend; @@ -1380,3 +1407,13 @@ fsl,ext-reset-output; status = "okay"; }; + +&a53_opp_table { + opp-1000000000 { + opp-microvolt = <850000>; + }; + + opp-1500000000 { + opp-microvolt = <950000>; + }; +}; |