diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8ulp.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 73 |
1 files changed, 72 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi index 57627bdaa851..8a6596d5a581 100644 --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/imx8ulp-power.h> +#include <dt-bindings/thermal/thermal.h> #include "imx8ulp-pinfunc.h" @@ -39,6 +40,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&A35_L2>; + cpu-idle-states = <&cpu_sleep>; }; A35_1: cpu@1 { @@ -47,6 +49,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&A35_L2>; + cpu-idle-states = <&cpu_sleep>; }; A35_L2: l2-cache0 { @@ -54,6 +57,19 @@ cache-level = <2>; cache-unified; }; + + idle-states { + entry-method = "psci"; + + cpu_sleep: cpu-sleep { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0>; + local-timer-stop; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + }; + }; }; gic: interrupt-controller@2d400000 { @@ -78,6 +94,28 @@ method = "smc"; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&scmi_sensor 0>; + + trips { + cpu_alert0: trip0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ @@ -148,11 +186,17 @@ }; }; + cm33: remoteproc-cm33 { + compatible = "fsl,imx8ulp-cm33"; + status = "disabled"; + }; + soc: soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x40000000>; + ranges = <0x0 0x0 0x0 0x40000000>, + <0x60000000 0x0 0x60000000 0x1000000>; s4muap: mailbox@27020000 { compatible = "fsl,imx8ulp-mu-s4"; @@ -307,6 +351,21 @@ #reset-cells = <1>; }; + flexspi2: spi@29810000 { + compatible = "nxp,imx8mm-fspi"; + reg = <0x29810000 0x10000>, <0x60000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>, + <&pcc4 IMX8ULP_CLK_FLEXSPI2>; + clock-names = "fspi", "fspi_en"; + assigned-clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>; + assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>; + status = "disabled"; + }; + lpi2c6: i2c@29840000 { compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x29840000 0x10000>; @@ -365,6 +424,10 @@ <&pcc4 IMX8ULP_CLK_USDHC0>; clock-names = "ipg", "ahb", "per"; power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>; + assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV1>, + <&pcc4 IMX8ULP_CLK_USDHC0>; + assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV1>; + assigned-clock-rates = <389283840>, <389283840>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; bus-width = <4>; @@ -380,6 +443,10 @@ <&pcc4 IMX8ULP_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>; + assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>, + <&pcc4 IMX8ULP_CLK_USDHC1>; + assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>; + assigned-clock-rates = <194641920>, <194641920>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; bus-width = <4>; @@ -395,6 +462,10 @@ <&pcc4 IMX8ULP_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>; + assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>, + <&pcc4 IMX8ULP_CLK_USDHC2>; + assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>; + assigned-clock-rates = <194641920>, <194641920>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; bus-width = <4>; |