diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts | 304 |
1 files changed, 304 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts new file mode 100644 index 000000000000..0c55b749c834 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com> + * + * Product homepage: + * phyBOARD-Segin carrier board is reused for the i.MX93 design. + * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/ + */ +/dts-v1/; + +#include "imx93-phycore-som.dtsi" + +/{ + model = "PHYTEC phyBOARD-Segin-i.MX93"; + compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som", + "fsl,imx93"; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &bbnsm_rtc; + }; + + chosen { + stdout-path = &lpuart1; + }; + + flexcan1_tc: can-phy0 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_tc>; + enable-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + }; + + reg_sound_1v8: regulator-sound-1v8 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VCC1V8_AUDIO"; + }; + + reg_sound_3v3: regulator-sound-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC3V3_ANALOG"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VCC_SD"; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&audio_codec>; + clocks = <&clk IMX93_CLK_SAI1>; + }; + }; +}; + +/* Ethernet */ +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <100000000>, <50000000>; + status = "okay"; +}; + +&mdio { + ethphy2: ethernet-phy@2 { + compatible = "ethernet-phy-id0022.1561"; + reg = <2>; + clocks = <&clk IMX93_CLK_ENET_REF_PHY>; + clock-names = "rmii-ref"; + micrel,led-mode = <1>; + }; +}; + +/* CAN */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + phys = <&flexcan1_tc>; + status = "okay"; +}; + +/* I2C2 */ +&lpi2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + status = "okay"; + + /* Codec */ + audio_codec: audio-codec@18 { + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + #sound-dai-cells = <0>; + AVDD-supply = <®_sound_3v3>; + IOVDD-supply = <®_sound_3v3>; + DRVDD-supply = <®_sound_3v3>; + DVDD-supply = <®_sound_1v8>; + }; + + /* RTC */ + i2c_rtc: rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* Audio */ +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clk IMX93_CLK_SAI1>; + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <19200000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +/* USB */ +&usbotg1 { + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +/* SD-Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + bus-width = <4>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + disable-wp; + no-mmc; + no-sdio; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x4000050e + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x50e + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x50e + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x50e + MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x57e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + MX93_PAD_PDM_CLK__CAN1_TX 0x139e + >; + }; + + pinctrl_flexcan1_tc: flexcan1tcgrp { + fsl,pins = < + MX93_PAD_ENET2_TD3__GPIO4_IO16 0x31e + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e + MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX93_PAD_ENET2_RD2__GPIO4_IO26 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX93_PAD_UART2_RXD__SAI1_MCLK 0x1202 + MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x1202 + MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x1202 + MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x1402 + MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x1402 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x30e + >; + }; + + pinctrl_usdhc2_cd: usdhc2cdgrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2_default: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + /* need to config the SION for data and cmd pad, refer to ERR052021 */ + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; |