diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx93.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/freescale/imx93.dtsi | 81 |
1 files changed, 70 insertions, 11 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 1d8dd14b65cf..6f85a05ee7e1 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/fsl,imx93-power.h> +#include <dt-bindings/thermal/thermal.h> #include "imx93-pinfunc.h" @@ -132,6 +133,44 @@ interrupt-parent = <&gic>; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + cm33: remoteproc-cm33 { + compatible = "fsl,imx93-cm33"; + clocks = <&clk IMX93_CLK_CM33_GATE>; + status = "disabled"; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -252,7 +291,7 @@ }; lpuart1: serial@44380000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x44380000 0x1000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART1_GATE>; @@ -261,7 +300,7 @@ }; lpuart2: serial@44390000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x44390000 0x1000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART2_GATE>; @@ -343,6 +382,26 @@ reg = <0x44480000 0x2000>; }; + tmu: tmu@44482000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x44482000 0x1000>; + clocks = <&clk IMX93_CLK_TMC_GATE>; + little-endian; + fsl,tmu-range = <0x800000da 0x800000e9 + 0x80000102 0x8000012a + 0x80000166 0x800001a7 + 0x800001b6>; + fsl,tmu-calibration = <0x00000000 0x0000000e + 0x00000001 0x00000029 + 0x00000002 0x00000056 + 0x00000003 0x000000a2 + 0x00000004 0x00000116 + 0x00000005 0x00000195 + 0x00000006 0x000001b2>; + #thermal-sensor-cells = <1>; + }; + + adc1: adc@44530000 { compatible = "nxp,imx93-adc"; reg = <0x44530000 0x10000>; @@ -486,7 +545,7 @@ }; lpuart3: serial@42570000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42570000 0x1000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART3_GATE>; @@ -495,7 +554,7 @@ }; lpuart4: serial@42580000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42580000 0x1000>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART4_GATE>; @@ -504,7 +563,7 @@ }; lpuart5: serial@42590000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42590000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART5_GATE>; @@ -513,7 +572,7 @@ }; lpuart6: serial@425a0000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x425a0000 0x1000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART6_GATE>; @@ -551,7 +610,7 @@ }; lpuart7: serial@42690000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42690000 0x1000>; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART7_GATE>; @@ -560,7 +619,7 @@ }; lpuart8: serial@426a0000 { - compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x426a0000 0x1000>; interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART8_GATE>; @@ -683,7 +742,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <8>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -697,7 +756,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -760,7 +819,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; }; |