diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/mba8mx.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/mba8mx.dtsi | 50 |
1 files changed, 25 insertions, 25 deletions
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index e2bc53b8d39a..7ee1228a50f4 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -29,6 +29,12 @@ stdout-path = &uart3; }; + clk_xtal25: clk-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -94,18 +100,11 @@ port { panel_in_lvds: endpoint { - data-lanes = <1 2 3 4>; remote-endpoint = <&lvds_bridge_out>; }; }; }; - pcie0_refclk: pcie0-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - reg_12v: regulator-12v { compatible = "regulator-fixed"; regulator-name = "MBA8MX_12V"; @@ -139,7 +138,7 @@ sound { compatible = "fsl,imx-audio-tlv320aic32x4"; - model = "imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; ssi-controller = <&sai3>; audio-codec = <&tlv320aic3x04>; }; @@ -185,6 +184,8 @@ reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>; reset-assert-us = <500000>; reset-deassert-us = <500>; + interrupt-parent = <&expander2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; }; }; }; @@ -219,7 +220,7 @@ line-name = "BOOT_CFG_OE#"; }; - rst-usb-hub-hog { + rst_usb_hub_hog: rst-usb-hub-hog { gpio-hog; gpios = <13 0>; output-high; @@ -237,7 +238,6 @@ }; &i2c2 { - clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; @@ -258,16 +258,27 @@ reg = <0x1f>; }; + /* + * TUSB8041 is at 0x41, but not connected by default + * Note: TUSB8041 only supports 100 kHz! + */ + eeprom3: eeprom@57 { compatible = "nxp,se97b", "atmel,24c02"; reg = <0x57>; pagesize = <16>; vcc-supply = <®_vcc_3v3>; }; + + pcieclk: clk@68 { + compatible = "renesas,9fgv0441"; + reg = <0x68>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; }; &i2c3 { - clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_gpio>; @@ -306,20 +317,9 @@ }; }; -&mipi_dsi { - samsung,burst-clock-frequency = <891000000>; - samsung,esc-clock-frequency = <20000000>; - - ports { - port@1 { - reg = <1>; - - mipi_dsi_out: endpoint { - data-lanes = <1 2 3 4>; - remote-endpoint = <&lvds_bridge_in>; - }; - }; - }; +&mipi_dsi_out { + data-lanes = <1 2 3 4>; + remote-endpoint = <&lvds_bridge_in>; }; &pwm3 { |